{"product_id":"accupro-12185078-square-end-mill-11-64-in-2-flute-carbide","title":"Accupro 12185078 Square End Mill 11\/64 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12185078 is a double-end, square-profile solid carbide end mill designed for precision milling in metalworking and machining operations. The cutting diameter measures 11\/64 inches (0.1719 inches) with a 3\/16-inch (0.1875 inches) shank diameter and a 2-inch overall length. The micrograin carbide substrate supports a TiCN (Titanium Carbonitride) coating that increases surface hardness and wear resistance. With a 40-degree helix angle and spiral flute geometry, this tool promotes efficient chip evacuation during slotting, profiling, and plunge cuts.\u003c\/p\u003e\n\u003cp\u003eThis stub-length end mill is suited for light-material removal and close-tolerance work in ferrous and non-ferrous metals, plastics, and composites. The centercutting design allows direct plunge entry without pre-drilling. The double-end configuration provides two usable cutting ends, extending tool service life in production environments. A licensed machinist or CNC operator typically installs and runs this tool in a vertical machining center, CNC mill, or manual knee mill using a collet or end mill holder matched to the 3\/16-inch shank.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and wear resistance at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003eTiCN finish improves surface hardness and reduces built-up edge on ferrous materials\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle with spiral flutes for effective chip evacuation in slotting and profiling\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eDouble-end design provides two cutting ends per tool, lowering cost-per-edge in production use\u003c\/li\u003e\n  \u003cli\u003eStub-length profile (5\/16-inch length of cut) maximizes rigidity and minimizes deflection in tight setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual mills accepting a 3\/16-inch collet or end mill holder. Suitable for right-hand spindle rotation. No specific compatible machine models were provided in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the 3\/16-inch shank in a properly sized collet or end mill holder, and confirm runout before initiating a cut. Power down and lock out the machine spindle before changing tooling. Do not exceed the tool manufacturer's recommended feed and speed parameters for the workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 11\/64 inch (0.1719 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12185078\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51730730844466,"sku":"12185078","price":66.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1facf0da5251681a0aa821e7aa13ddb9.jpg?v=1788721860","url":"https:\/\/voomisupply.com\/products\/accupro-12185078-square-end-mill-11-64-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}