{"product_id":"accupro-12184433-ball-end-mill-0-125-in-3-flute-carbide","title":"Accupro 12184433 Ball End Mill 0.125 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12184433 is a solid carbide ball end mill designed for precision milling operations in metal, composite, and engineering-grade plastic applications. Built with a 0.125-inch mill diameter and a 0.75-inch length of cut, this three-flute tool delivers a balance of chip clearance and cutting wall rigidity suited to contour milling, profiling, and 3D surface work. The 40-degree helix angle promotes efficient chip evacuation and smooth cutting action. Solid carbide construction with a micrograin grade provides the hardness and edge retention required for demanding CNC machining environments. The uncoated finish makes it well-suited for non-ferrous metals and materials where coating adhesion is not a factor.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in CNC machining centers, vertical mills, and precision manual mills where tight tolerances and fine surface finishes are required. The long-series overall length of 2.25 inches and 0.125-inch shank diameter make it appropriate for applications requiring extended reach into pockets or along contoured surfaces. The single-end configuration and right-hand cutting and flute direction are standard for general CNC production and tool-and-die work. Machinists and CNC operators in job shops, manufacturing facilities, and precision fabrication environments are the primary users of this tool.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.125-inch ball end mill diameter for fine detail milling and contour work\u003c\/li\u003e\n\u003cli\u003eThree-flute geometry balances chip evacuation with cutting surface contact\u003c\/li\u003e\n\u003cli\u003e40-degree right-hand spiral helix for smooth cutting action and reduced chatter\u003c\/li\u003e\n\u003cli\u003eSolid carbide micrograin construction for high hardness and edge retention\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for non-ferrous metals and engineered plastics\u003c\/li\u003e\n\u003cli\u003eLong-series overall length of 2.25 inches supports extended-reach applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank ball end mill compatible with CNC machining centers and manual mills accepting a 0.125-inch shank diameter collet or end mill holder.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator with the spindle fully powered down and locked out before tool changes. The 0.125-inch shank must be seated to the recommended grip depth in a properly sized collet or shrink-fit holder to prevent runout and tool pullout during cutting. Verify spindle speed and feed rate settings against the tool manufacturer recommendations for the workpiece material before engaging the cut. Avoid side loading that exceeds the tool diameter-to-reach ratio, as small-diameter carbide end mills are susceptible to deflection and breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12184433\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51750713590066,"sku":"12184433","price":44.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3fc64feea010f628f0aa170fe2703843.jpg?v=1788918894","url":"https:\/\/voomisupply.com\/products\/accupro-12184433-ball-end-mill-0-125-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}