{"product_id":"accupro-12184205-ball-end-mill-0-75in-2-flute-solid-carbide","title":"Accupro 12184205 Ball End Mill 0.75in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12184205 is a solid carbide ball end mill designed for precision milling operations in metal cutting, die and mold work, and contour profiling. With a 0.75 inch mill diameter and a 1 inch length of cut, this two-flute tool is built for applications requiring accurate radial profiles and smooth surface finishes. The micrograin carbide substrate provides rigidity and wear resistance across a range of workpiece materials. The 40-degree helix angle promotes efficient chip evacuation and reduces cutting forces during operation. This tool is sold as a single-end configuration and is intended for use by machinists and toolmakers in production and job shop environments.\u003c\/p\u003e\n\u003cp\u003eThis ball end mill suits CNC machining centers and manual mills where contour milling, slotting, and 3D profiling are required. The 0.75 inch shank diameter matches the mill diameter for straightforward tool holding in standard collets or end mill holders. The stub length category, with a 3 inch overall length, provides added rigidity for applications where reach is not a limiting factor. Right-hand cutting and right-hand spiral flute direction are standard configurations compatible with conventional CNC spindle setups. The uncoated finish makes it suitable for use with cutting fluids on ferrous and non-ferrous materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide micrograin construction for improved hardness and edge retention\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes efficient chip evacuation and smooth cutting action\u003c\/li\u003e\n  \u003cli\u003eBall end geometry suited for 3D contouring, profiling, and die work\u003c\/li\u003e\n  \u003cli\u003eTwo-flute design balances chip clearance with cutting rigidity\u003c\/li\u003e\n  \u003cli\u003eUncoated finish compatible with flood coolant and standard cutting oils\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 to -0.002 inches for consistent fit and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard end mill holders, collet chucks, and shrink-fit tooling accepting a 0.75 inch shank diameter. Right-hand cut configuration is compatible with standard CNC and manual milling spindles.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by qualified machinists with the spindle fully stopped and the machine in a safe, locked-out state. Ensure the shank is fully seated and properly torqued in the tool holder per the holder manufacturer specifications before running. Inspect the cutting edges for chips or damage before each use. Verify spindle speed and feed rate settings are appropriate for the workpiece material before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12184205\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51745699168562,"sku":"12184205","price":194.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/24e63b1c99b3f18d9e1587c8487c5739.jpg?v=1788864813","url":"https:\/\/voomisupply.com\/products\/accupro-12184205-ball-end-mill-0-75in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}