{"product_id":"accupro-12183853-square-end-mill-6-flute-solid-carbide","title":"Accupro 12183853 Square End Mill 6 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12183853 is a 6-flute solid carbide square end mill designed for high-performance milling in demanding metalworking applications. Built from micrograin carbide and coated with AlTiN (aluminum titanium nitride), this tool handles hardened steels, stainless, and high-temp alloys at elevated cutting speeds. The 40-degree helix angle reduces cutting forces and improves chip evacuation compared to standard 30-degree geometry. With a 0.25 inch cutting diameter and 0.75 inch length of cut, this is a right-hand spiral flute, centercutting end mill suited for slotting, profiling, and plunge operations. Machinists and tool-and-die professionals install this tool in CNC machining centers and manual knee mills.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for finish and semi-finish milling of ferrous and non-ferrous materials in production and job-shop environments. The centercutting geometry allows direct plunge entry without a pre-drilled hole, expanding its use in pocket milling. The 0.25 inch shank diameter fits standard ER collets, side-lock holders, and shrink-fit tooling commonly used in CNC vertical and horizontal machining centers. The regular length configuration keeps overhang low for maximum rigidity during full-width slotting passes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-flute design increases feed rate capability and improves surface finish on finish milling passes\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides high heat resistance and extended tool life in ferrous machining\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes smooth chip flow and reduced radial cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting — capable of direct plunge entry into workpiece material\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for edge strength and wear resistance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute with spiral flute geometry for consistent chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 0.25 inch ER collet chucks, side-lock end mill holders, and shrink-fit toolholders on CNC machining centers and manual mills. Verify holder runout tolerance against the shank diameter tolerance of -0.0001 to -0.0004 inches before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the machine spindle is fully stopped and locked out before loading or removing the tool from the holder. Confirm collet or holder bore cleanliness to avoid seating errors that increase runout. Do not exceed the 0.75 inch length of cut — engaging flutes beyond the listed LOC risks tool breakage and workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12183853\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51747175694642,"sku":"12183853","price":46.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/54657b4e93be43305beb99280fb373ba.jpg?v=1788877073","url":"https:\/\/voomisupply.com\/products\/accupro-12183853-square-end-mill-6-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}