{"product_id":"accupro-12183802-square-end-mill-5-8-in-5-flute-solid-carbide","title":"Accupro 12183802 Square End Mill 5\/8 in 5 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12183802 is a solid carbide square end mill engineered for high-performance milling in ferrous and non-ferrous materials. It measures 0.625 inches in diameter with a 1.625-inch length of cut and a 3.5-inch overall length. The five-flute geometry increases chip removal rates and improves surface finish compared to four-flute designs. An AlTiN coating provides heat resistance and extended tool life at elevated cutting speeds. The 45-degree helix angle reduces cutting forces and promotes smooth chip evacuation. This end mill is center-cutting, allowing direct plunge entry without a pre-drilled hole. Intended for use by machinists and CNC operators in job shop, production, and maintenance machining environments.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for side milling, slotting, profiling, and plunging operations in ferrous alloys, stainless steel, hardened steels, and similar materials where AlTiN coatings are effective. It fits standard milling machines and CNC machining centers with ER, CAT, BT, or similar toolholding systems that accept a 0.625-inch shank. Regular-length geometry makes it appropriate for general-purpose setups where extended reach is not required. Both cut and flute direction are right-hand, matching the standard spindle rotation on conventional vertical and horizontal mills.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive flutes with spiral geometry for higher feed rates and improved finish\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle reduces radial cutting forces and improves chip flow\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for heat resistance and extended tool life at high cutting speeds\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge milling without a pilot hole\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for use in standard CNC and manual milling spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard-shank solid carbide square end mill compatible with any milling machine or CNC machining center toolholder accepting a 0.625-inch round shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank in a collet, end mill holder, or shrink-fit holder to the appropriate runout specification before use. Power down and lock out the spindle before changing tooling. Do not exceed the toolholder manufacturer's recommended shank engagement depth, and verify setscrew or collet torque per the toolholder specification prior to operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches (1-5\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches (3-1\/2 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12183802\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51733287371058,"sku":"12183802","price":226.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3a39cd834cf4bc596d8ea4da844f9938.jpg?v=1788753606","url":"https:\/\/voomisupply.com\/products\/accupro-12183802-square-end-mill-5-8-in-5-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}