{"product_id":"accupro-12183658-corner-radius-end-mill-1-4-in-4-flute-altin","title":"Accupro 12183658 Corner Radius End Mill 1\/4 in 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12183658 is a solid carbide corner radius end mill designed for high-performance milling in ferrous and hardened materials. It features a 1\/4 inch diameter, a 1-1\/2 inch length of cut, and a 0.06 inch corner radius that reduces stress concentrations at the cutting edge and extends tool life compared to sharp-corner geometry. The AlTiN coating provides high heat resistance and surface hardness, making it well-suited for dry or semi-dry cutting at elevated speeds. With 4 flutes and a 40-degree helix angle, this end mill delivers efficient chip evacuation and a good balance of feed rate capacity and finish quality. Micrograin carbide substrate adds toughness and wear resistance throughout the tool life.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in CNC machining centers and manual mills in tool-and-die, mold making, aerospace component work, and general precision machining. The single-end, centercutting configuration supports both peripheral and plunge operations. The extra-long 6 inch overall length allows reach into deep pockets, cavities, and stepped features that standard-length tools cannot access. Right-hand cutting and right-hand flute direction are standard for conventional spindle setups. It is sold as an individual unit with a minimum order quantity of one.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN coating for high-temperature resistance and extended tool life in ferrous alloys\u003c\/li\u003e\n\u003cli\u003e0.06 inch corner radius reduces edge chipping and stress concentration on the workpiece\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle promotes efficient chip evacuation and smooth cutting action\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows plunge milling and ramping operations\u003c\/li\u003e\n\u003cli\u003eExtra-long 6 inch OAL enables reach into deep pockets and cavities\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for superior hardness and edge retention\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers and manual mills accepting a 1\/4 inch straight shank. Suitable for use with standard 1\/4 inch collets and end mill holders.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Seat the shank fully into the collet or tool holder to the specified grip length and torque the holder to the tool manufacturer or machine builder specification. Verify runout with a dial indicator before beginning a cut, as excessive runout will accelerate wear on a corner radius geometry tool.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Extra Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: plus or minus 0.0015 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.0025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12183658\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51738558431538,"sku":"12183658","price":82.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6892a6163d86ad1ab46d0ba2d4a43cb3.jpg?v=1788800987","url":"https:\/\/voomisupply.com\/products\/accupro-12183658-corner-radius-end-mill-1-4-in-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}