{"product_id":"accupro-12182772-corner-radius-end-mill-3-16in-4-flute-altin","title":"Accupro 12182772 Corner Radius End Mill 3\/16in 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12182772 is a solid carbide corner radius end mill designed for precision milling operations in ferrous and non-ferrous materials. It features a 3\/16 inch diameter with a 0.03 inch corner radius and a 3\/8 inch length of cut, making it suited for detail work and contouring where sharp inside corners must be avoided to reduce stress concentration. The AlTiN coating improves heat and wear resistance at elevated cutting temperatures. With a 40-degree helix angle and 4 right-hand spiral flutes, it promotes efficient chip evacuation and smooth surface finishes. This is a single-end, centercutting tool ground from micrograin carbide stock.\u003c\/p\u003e\u003cp\u003eThis end mill is used in CNC machining centers and manual mills for profiling, slotting, and contouring cuts in tool steels, alloy steels, stainless, and hardened materials. The stub-length configuration provides rigidity in tight setups and short-reach applications. Machinists, tool and die makers, and precision CNC operators working in job shop and production environments are the primary users. The centercutting geometry allows plunge entry directly into the workpiece when the operation requires it.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/16 inch mill diameter with 3\/16 inch shank diameter for direct collet holding\u003c\/li\u003e\n\u003cli\u003e0.03 inch corner radius reduces stress risers and extends tool life in profiling cuts\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides oxidation resistance and hardness at high cutting speeds\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle with 4 right-hand spiral flutes for improved chip flow and finish\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows plunge milling without a pre-drilled entry hole\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for consistent edge sharpness and dimensional stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit cutting tool for CNC machining centers and manual knee mills accepting 3\/16 inch shank end mills via ER collet, end mill holder, or equivalent toolholding system.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and the machine is in an e-stop or powered-down state before changing tooling. Seat the shank to the full recommended grip depth in the collet or toolholder to maintain runout within tolerance. Do not exceed the shank diameter tolerance range when selecting collets, as improper fit will accelerate tool wear and compromise dimensional accuracy.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.03 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 to -0.002500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: 0.00150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12182772\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51731874349362,"sku":"12182772","price":37.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8c4a97211e95f30f6dc0f0605d20483c.jpg?v=1788735933","url":"https:\/\/voomisupply.com\/products\/accupro-12182772-corner-radius-end-mill-3-16in-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}