{"product_id":"accupro-12182713-square-end-mill-0-0984-in-4-flute-carbide","title":"Accupro 12182713 Square End Mill 0.0984 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12182713 is a solid carbide square end mill designed for precision milling in ferrous and non-ferrous materials. It features a 0.0984-inch (2.50 mm) mill diameter, a 0.1969-inch (5.00 mm) length of cut, and a stub-length body that minimizes deflection in tight-clearance setups. The TiCN coating improves surface hardness and wear resistance, extending tool life in abrasive cutting conditions. With four spiral flutes at a 30-degree helix angle and a micrograin carbide substrate, this end mill delivers clean, consistent cuts at small diameters. It is centercutting, allowing direct plunge entry into the workpiece.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for finish milling, slotting, and profiling operations in CNC machining centers and manual mills. The stub-length geometry makes it a strong choice for high-speed, high-accuracy work where rigidity matters more than reach. Typical applications include die and mold work, precision component machining, and detail work on small-scale parts where a full-length tool would introduce excessive vibration or runout.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0984-inch (2.50 mm) mill diameter with a tolerance of +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e4 spiral flutes at 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eTiCN finish for improved wear resistance and surface hardness\u003c\/li\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity at small diameters\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows plunge milling without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute — standard CNC spindle orientation\u003c\/li\u003e\n\u003cli\u003eStub-length body reduces deflection in precision milling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit tool for CNC machining centers and manual mills accepting a 3.00 mm (0.1181-inch) shank diameter with standard collet or end mill holder tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool is installed by machinists and CNC setup technicians using a compatible collet, shrink-fit holder, or end mill holder sized for the 3.00 mm shank. Confirm runout on the spindle and holder before cutting, as small-diameter carbide tools are sensitive to misalignment and can fracture under lateral load. Always verify spindle speed and feed rate against published cutting data for the workpiece material before engaging the cut. Carbide end mills at this diameter are brittle — avoid impact loading or interrupted cuts without appropriate feed adjustments.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0984 inches (2.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1969 inches (5.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 38.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12182713\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51728222716210,"sku":"12182713","price":36.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cc73a390bcb635a86ccd211e8da9e824.jpg?v=1788689826","url":"https:\/\/voomisupply.com\/products\/accupro-12182713-square-end-mill-0-0984-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}