{"product_id":"accupro-12182571-square-end-mill-0-4331-in-4-flute-carbide","title":"Accupro 12182571 Square End Mill 0.4331 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12182571 is a solid carbide square end mill designed for precision milling operations in metalworking and machining environments. With a 0.4331-inch (11.00 mm) mill diameter and a 0.9843-inch (25.00 mm) length of cut, this tool delivers consistent material removal across a range of ferrous and non-ferrous workpiece materials. The TiCN (titanium carbonitride) coating improves surface hardness and wear resistance, extending tool life in demanding cutting conditions. Four spiral flutes at a 40-degree helix angle promote efficient chip evacuation and smooth cutting action. This end mill is installed and used by machinists and CNC operators in production and job-shop settings.\u003c\/p\u003e\n\u003cp\u003eThis end mill suits a wide range of milling applications including slotting, profiling, and peripheral milling on machining centers and manual mills. The regular-length geometry and 12.00 mm shank diameter make it compatible with standard ER and straight-bore collet systems commonly found in vertical machining centers. The centercutting design allows plunge cutting directly into the workpiece without a pre-drilled entry point. Micrograin carbide construction supports use in harder workpiece materials where high-speed steel tooling would wear prematurely.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003eTiCN coating for increased surface hardness and extended tool life\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle with spiral flutes for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting capable  -  allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute configuration for standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 \/ -0.002 inches for close-tolerance work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use cutting tool for standard milling setups requiring a 0.4331-inch diameter, 4-flute solid carbide square end mill with a 12.00 mm shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank fully within the collet or tool holder to the manufacturer-specified engagement depth before tightening. Ensure the spindle and machine are fully powered down and locked out before changing tooling. Verify runout with a dial indicator after seating to confirm proper tool holding before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.4331 inches (11.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.9843 inches (25.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 76.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 12.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12182571\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51744028229938,"sku":"12182571","price":133.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d4a858e34cf28a152127dfedc28d6b63.jpg?v=1788853187","url":"https:\/\/voomisupply.com\/products\/accupro-12182571-square-end-mill-0-4331-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}