{"product_id":"accupro-12182464-corner-radius-end-mill-1-4-in-4-flute","title":"Accupro 12182464 Corner Radius End Mill 1\/4 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12182464 is a solid carbide corner radius end mill designed for precision milling of ferrous and non-ferrous materials. It features a 1\/4 inch diameter with a 0.045 inch corner radius, producing a controlled radius edge at the bottom of a pocket or slot without a dedicated ball end mill. The TiCN coating increases surface hardness and reduces friction during cutting. With a 40-degree helix angle and four right-hand spiral flutes, this tool promotes efficient chip evacuation and smooth finish passes. The micrograin carbide substrate provides rigidity and edge retention in demanding cut conditions. Licensed machinists and CNC operators use this tool in vertical machining centers and manual mills.\u003c\/p\u003e\u003cp\u003eThis end mill suits general-purpose profiling, slotting, and pocketing in shops running steel, stainless, cast iron, and similar materials. The centercutting geometry allows plunge entry, making it useful for ramping or plunging directly into a workpiece. The 3\/4 inch length of cut and 2-1\/2 inch overall length fit standard toolholders in compact VMC setups. Single-end construction means the tool is replaced when the cutting end is worn, keeping setup simple.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.045 inch corner radius reduces stress concentration at pocket floors and extends part life\u003c\/li\u003e\n\u003cli\u003eTiCN coating increases wear resistance and surface hardness over uncoated carbide\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and sharp edge retention\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle promotes chip lift and reduces heat buildup\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge and ramp entry\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement for 1\/4 inch shank toolholders including collet chucks, end mill holders, and shrink-fit holders accepting a 1\/4 inch straight shank. No specific OEM replacement data was provided with this SKU.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by qualified machinists or CNC operators familiar with cutting tool setup. Ensure the machine spindle is fully stopped and the toolholder is clean and free of debris before seating the shank. Verify runout with a dial indicator after clamping, as excessive runout accelerates edge wear and reduces corner radius accuracy. Follow the toolholder manufacturer torque specifications for set screws or collet nuts, and confirm depth-of-cut and feed rate parameters are appropriate for the workpiece material before engaging the cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.045 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 to -0.002500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: 0.00150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12182464\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51733625372978,"sku":"12182464","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/96d9fcd058346ea4114dd3c793c69c79.jpg?v=1788757065","url":"https:\/\/voomisupply.com\/products\/accupro-12182464-corner-radius-end-mill-1-4-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}