{"product_id":"accupro-12182200-square-end-mill-3-4-in-solid-carbide-ticn","title":"Accupro 12182200 Square End Mill 3\/4 in Solid Carbide Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12182200 is a solid carbide square end mill designed for precision milling operations in ferrous and non-ferrous materials. The cutter features a 3\/4 inch diameter with a 1 inch length of cut, a 40-degree helix angle, and a titanium carbonitride (TiCN) finish that increases surface hardness and wear resistance compared to uncoated carbide. Three spiral flutes provide a balance of chip evacuation and cutting stability. The micrograin carbide substrate resists chipping under demanding feed and speed conditions. This is a single-end, stub-length tool intended for CNC machining centers and manual mills in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe 12182200 is suited for side milling, slotting, and profiling operations where a 3\/4 inch tool diameter and stub-length reach are appropriate. The centercutting geometry allows plunge entry directly into the workpiece. Right-hand cut and right-hand flute orientation are standard for conventional spindle direction. The 3\/4 inch shank diameter matches directly to standard ER, end mill holders, and collet chucks common in most shop setups. The 3 inch overall length keeps deflection low in setups where extended reach is not required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention\u003c\/li\u003e\n  \u003cli\u003eTiCN coating increases surface hardness and reduces tool wear in abrasive materials\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes smooth cutting action and efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge milling without a pre-drilled entry hole\u003c\/li\u003e\n  \u003cli\u003eThree-flute geometry balances chip clearance with core strength at 3\/4 inch diameter\u003c\/li\u003e\n  \u003cli\u003eStub length and matched 3\/4 inch shank minimize deflection in tight-clearance setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard single-end square end mill for use in CNC machining centers, knee mills, and manual milling machines that accept a 3\/4 inch shank via collet, end mill holder, or set-screw holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully stopped and locked out before inserting or removing the tool from the holder. Seat the shank to the minimum recommended insertion depth per the holder manufacturer to avoid pull-out under load. Verify runout with a dial indicator after clamping before beginning a cut, as excessive runout will accelerate edge wear and reduce surface finish quality.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch (1.0000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches (3.0000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12182200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51745815429426,"sku":"12182200","price":186.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f59c511af7086a01ce00c6ef9c803207.jpg?v=1788865289","url":"https:\/\/voomisupply.com\/products\/accupro-12182200-square-end-mill-3-4-in-solid-carbide-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}