{"product_id":"accupro-12182175-square-end-mill-5-16-in-3-flute-carbide","title":"Accupro 12182175 Square End Mill 5\/16 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12182175 is a solid carbide square end mill designed for precise milling operations in metal, composite, and engineering plastics. Built from micrograin carbide, it delivers consistent edge retention and dimensional accuracy across demanding cuts. The 3-flute geometry with a 40-degree helix angle balances chip evacuation with surface finish quality, making it well suited to finishing passes and moderate material removal in harder workpiece materials. At 5\/16 inch in diameter with a 1\/2 inch length of cut, this is a stub-length tool optimized for rigidity over reach. It is installed and operated by machinists and toolroom technicians working on CNC machining centers and manual mills.\u003c\/p\u003e\n\u003cp\u003eThis end mill is appropriate for applications requiring tight tolerances and controlled surface finishes in ferrous and non-ferrous metals. The stub-length configuration reduces deflection in side-milling and slotting operations where a longer reach is not required. The centercutting design allows plunge entry directly into the workpiece without a pre-drilled starting point. Right-hand cut and right-hand flute orientation make it compatible with standard spindle rotation on conventional vertical and horizontal milling machines.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for enhanced edge retention and wear resistance\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes efficient chip flow and reduces cutting forces\u003c\/li\u003e\n  \u003cli\u003e3-flute spiral configuration balances material removal rate with surface finish quality\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without pilot drilling\u003c\/li\u003e\n  \u003cli\u003eStub-length design maximizes rigidity and minimizes deflection in short-reach applications\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for use with cutting fluids in a wide range of base materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard 5\/16 inch shank square end mill compatible with ER and straight-bore collet systems on CNC machining centers and manual knee mills accepting a 5\/16 inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully stopped and power is locked out before inserting or removing the tool from the collet or tool holder. Achieve full shank engagement in the collet to the recommended minimum depth to prevent pullout under cutting loads. Verify runout with a dial indicator after tool installation before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12182175\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51735859069234,"sku":"12182175","price":46.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3f66ae11d0ee411f3c10b3088785af7f.jpg?v=1788774606","url":"https:\/\/voomisupply.com\/products\/accupro-12182175-square-end-mill-5-16-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}