{"product_id":"accupro-12181883-corner-radius-end-mill-1-in-3-flute-carbide","title":"Accupro 12181883 Corner Radius End Mill 1 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12181883 is a solid carbide corner radius end mill designed for high-performance milling in demanding machining environments. It features a 1-inch mill diameter, a 1-3\/4-inch length of cut, and a 0.03-inch corner radius that reduces stress concentration at the cutting edge and extends tool life in profiling and contouring applications. The AlTiN coating provides heat resistance and hardness at elevated cutting temperatures, making it well suited for hard steels, stainless alloys, and cast iron. With 3 right-hand spiral flutes and a 40-degree helix angle, this end mill promotes efficient chip evacuation and smooth surface finishes. It is a single-end, centercutting design, allowing plunge entry and ramping operations. Machinists and CNC operators in job shops and production environments are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill is built for milling operations on CNC machining centers and manual knee mills requiring a corner radius profile. It handles slotting, side milling, profiling, and pocket milling where a sharp 90-degree corner is not acceptable or where edge strength is a priority. The micrograin carbide substrate supports tight tolerances and consistent performance in ferrous and non-ferrous materials. The 1-inch shank diameter fits standard ER collets, end mill holders, and hydraulic toolholders sized for 1-inch shanks. It is appropriate for both roughing and finishing passes depending on depth of cut and feed selection.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.03-inch corner radius reduces edge chipping and stress in profiling cuts\u003c\/li\u003e\n\u003cli\u003eAlTiN coating delivers thermal hardness for dry or semi-dry cutting in hard materials\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate supports tight tolerances and repeatable tool life\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle with 3 right-hand spiral flutes promotes chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows plunge and ramp entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 4-inch overall length for reach in standard setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style solid carbide corner radius end mill compatible with standard 1-inch end mill holders, ER collets, and hydraulic toolholders used on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist or CNC operator with the spindle fully stopped and the machine in a safe, powered-down state. Confirm that the toolholder bore and collet are clean and free of chips before seating the shank to the recommended engagement depth. Torque retention screws or collet nuts to the toolholder manufacturer specifications using the appropriate spanner or torque wrench. Verify runout with a dial test indicator before beginning cuts, as excessive runout will accelerate wear and compromise corner radius accuracy.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.03 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: plus or minus 0.0015 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 to -0.002500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.34 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12181883\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51747467788594,"sku":"12181883","price":466.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1a6c1dc9ad7b7423d8e57a28604f3e72_2379b548-9b90-41d0-a071-8ea8498008f6.jpg?v=1788880706","url":"https:\/\/voomisupply.com\/products\/accupro-12181883-corner-radius-end-mill-1-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}