{"product_id":"accupro-12181347-corner-radius-end-mill-1-4-in-2-flute","title":"Accupro 12181347 Corner Radius End Mill 1\/4 in 2 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12181347 is a single-end corner radius end mill designed for precision milling applications in ferrous and hardened materials. Built from micrograin solid carbide and coated with AlTiN, it delivers heat resistance and wear life in demanding cutting conditions. The 0.015-inch corner radius reduces stress concentrations at the cutting edge, extending tool life in slotting, profiling, and pocket milling operations. With a 40-degree helix angle and 2 right-hand spiral flutes, it promotes efficient chip evacuation. The 0.25-inch diameter and 0.75-inch length of cut make it suitable for fine-detail work in both CNC machining centers and manual mills.\u003c\/p\u003e\u003cp\u003eThis end mill is used in job shops, toolrooms, and production machining environments where tight-tolerance corner radii and smooth floor finishes are required. It is well suited for die and mold work, aerospace components, and precision fixture machining. The centercutting design allows plunge entry in addition to peripheral and slot cuts. It is installed and operated by machinists and CNC programmers working in ferrous alloys, stainless steel, titanium, and similar hard materials where AlTiN coating provides thermal stability.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide construction for rigidity and edge retention\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for high-temperature resistance and extended tool life in hard materials\u003c\/li\u003e\n\u003cli\u003e0.015-inch corner radius reduces chipping and stress at cutting corners\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle promotes efficient chip flow and smooth surface finish\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC and manual mill spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank end mill for use in 1\/4-inch collets, ER collet chucks, and end mill holders on CNC machining centers and manual vertical mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist with the machine spindle fully stopped and power isolated before tool changes. Ensure the 1\/4-inch shank is seated to the full recommended gauge-line depth in the collet or holder and that the collet nut is torqued per the toolholder manufacturer specification. Inspect the collet for wear before use, as runout directly affects corner radius accuracy and tool life. Follow applicable shop safety procedures and machine manufacturer guidelines during setup.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.750 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.015 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Micrograin Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: plus or minus 0.00150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 to -0.002500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.12 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12181347\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51783164854578,"sku":"12181347","price":49.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/16adb98da21fce24252bbf13bd420aa8.jpg?v=1789186839","url":"https:\/\/voomisupply.com\/products\/accupro-12181347-corner-radius-end-mill-1-4-in-2-flute","provider":"Voomi Supply","version":"1.0","type":"link"}