{"product_id":"accupro-12181268-corner-radius-end-mill-1-8-in-2-flute-carbide","title":"Accupro 12181268 Corner Radius End Mill 1\/8 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12181268 is a solid carbide corner radius end mill designed for precision milling operations in metal cutting and machining applications. It features a 1\/8 inch cutting diameter with a 0.015 inch corner radius that reduces stress concentration at the cutting edge and improves surface finish on milled profiles. The 2-flute, single-end geometry with a 40-degree right-hand helix provides efficient chip evacuation at higher feed rates. An AlTiN coating increases surface hardness and thermal resistance, extending tool life in ferrous and hardened workpiece materials. This tool is installed and run by machinists and CNC programmers in job shop, production, and maintenance machining environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for finish and semi-finish milling of slots, pockets, and contoured features where a radiused corner is required by design or to prevent sharp-corner stress risers. The centercutting design allows plunge entry directly into the workpiece. Its 1\/2 inch length of cut and 1-1\/2 inch overall length make it well matched to shallow-to-medium-depth cavity work on vertical machining centers and CNC knee mills. Micrograin carbide substrate supports tight tolerances and consistent edge geometry across the tool life.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.015 inch corner radius reduces edge chipping and improves workpiece surface finish\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides high thermal and oxidation resistance for dry or minimal-coolant cutting\u003c\/li\u003e\n  \u003cli\u003e40-degree right-hand helix promotes efficient chip evacuation in slotting and pocket milling\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate supports precise tolerances and repeatable edge sharpness\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with 1\/8 inch shank for standard collet or end mill holder mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for CNC machining centers, knee mills, and similar equipment accepting 1\/8 inch straight-shank end mills via collet chuck or end mill holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. The machine spindle must be fully stopped and locked out before mounting or removing the tool from the holder. Use a calibrated collet or end mill holder sized to the 1\/8 inch shank diameter and tighten to the holder manufacturer's specified torque procedure. Verify runout with a dial indicator after seating to confirm tool concentricity before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.015 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: 0.00150 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 to -0.002500 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12181268\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51740857237810,"sku":"12181268","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b56e5f43ca2c4467a53a63abf94738f0.jpg?v=1788827904","url":"https:\/\/voomisupply.com\/products\/accupro-12181268-corner-radius-end-mill-1-8-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}