{"product_id":"accupro-12180724-square-end-mill-5-flute-solid-carbide-altin","title":"Accupro 12180724 Square End Mill 5 Flute Solid Carbide Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12180724 is a solid carbide square end mill designed for high-performance milling in demanding shop environments. Built from micrograin carbide and finished with an AlTiN coating, it handles elevated cutting temperatures and abrasive workpiece materials where high-speed steel tooling falls short. The 0.25 inch cutting diameter pairs with a 1.25 inch length of cut and a 3 inch overall length, making it well suited for slot milling, profiling, and pocket work in tight clearance conditions. Five flutes provide a strong feed-per-tooth rate and a fine surface finish, while the 40-degree helix angle promotes efficient chip evacuation and reduces chatter during cut.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use on CNC machining centers, vertical mills, and manual knee mills where a right-hand cut, right-hand spiral flute tool is required. The variable index geometry reduces harmonic vibration during full-width slotting and side milling passes. Its centercutting capability allows direct plunge entry into material without a pre-drilled pilot hole, adding flexibility in complex program routines. Machinists working in tool steels, stainless alloys, cast iron, and hardened materials will find the AlTiN coating and micrograin substrate well matched to those applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide substrate for rigidity and wear resistance in hard or abrasive materials\u003c\/li\u003e\n\u003cli\u003eAlTiN finish improves heat resistance and extends tool life at elevated spindle speeds\u003c\/li\u003e\n\u003cli\u003eFive flutes with variable index spacing to dampen vibration and improve surface finish\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle promotes smooth cutting action and effective chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge milling without a starter hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand spiral flute configuration for standard CNC and manual mill setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank end mill compatible with 0.25 inch collets, ER collet chucks, shrink-fit holders, and side-lock milling arbors accepting a 0.25 inch straight shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Secure the shank in a clean, undamaged collet or tool holder and verify runout with a dial indicator before cutting. Always power down and lock out the spindle before changing tooling. Confirm that spindle speed and feed rate are set per the toolmaker's recommendations for the specific workpiece material before engaging the cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12180724\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51750200541490,"sku":"12180724","price":68.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76248270434032f18b869901da1c315a.jpg?v=1788914266","url":"https:\/\/voomisupply.com\/products\/accupro-12180724-square-end-mill-5-flute-solid-carbide-altin","provider":"Voomi Supply","version":"1.0","type":"link"}