{"product_id":"accupro-12178687-corner-radius-end-mill-5-8-in-5-flute","title":"Accupro 12178687 Corner Radius End Mill 5\/8 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12178687 is a solid carbide corner radius end mill designed for high-performance milling in demanding metalworking applications. Built from micrograin solid carbide and finished with an AlTiN (aluminum titanium nitride) coating, this tool handles hardened steels, stainless alloys, and high-temperature alloys where tool life and edge retention matter. The 5\/8 inch diameter cutter carries five flutes with a 0.06 inch corner radius, a 40-degree helix angle, and variable index geometry that reduces chatter and harmonics during extended cuts. It is a single-end, centercutting design with right-hand flute direction and right-hand cutting direction. Machinists and CNC programmers in production shops and job shops select this tool for profiling, slotting, and finishing passes that require a controlled corner blend.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for ferrous and non-ferrous machining operations in CNC machining centers and manual knee mills where a 5\/8 inch straight shank is the standard toolholder interface. The 2-1\/2 inch length of cut supports side-milling and deep-pocket work without excessive overhang. The 5 inch overall length gives clearance for medium-depth setups. The AlTiN coating provides thermal resistance at high surface speeds, making this tool a practical choice for dry or near-dry machining environments where coolant is limited or absent. It is not configured for extended reach applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for edge sharpness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for high-temperature and high-speed cutting performance\u003c\/li\u003e\n  \u003cli\u003e5-flute geometry increases feed rate capacity compared to 4-flute designs\u003c\/li\u003e\n  \u003cli\u003eVariable index flute spacing reduces harmonic chatter during deep cuts\u003c\/li\u003e\n  \u003cli\u003e0.06 inch corner radius extends tool life and reduces stress concentration at the cutting edge\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and milling machines equipped with 5\/8 inch toolholders, collet chucks, or end mill holders accepting a straight shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed by a qualified machinist with the machine in a fully stopped and locked-out state per applicable machine guarding and lockout\/tagout procedures. Ensure the shank is fully seated and properly torqued in the toolholder according to the toolholder manufacturer specifications before spindle engagement. Inspect the cutting edges for chips or coating damage before mounting. Do not exceed the toolholder's rated runout tolerance, as excessive runout will accelerate edge wear and reduce corner radius accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: 0.00150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12178687\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51738765525298,"sku":"12178687","price":275.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/492048aa1468da276bba37788785bdf2_8f316def-25af-4edb-82da-4a596810ca52.jpg?v=1788804103","url":"https:\/\/voomisupply.com\/products\/accupro-12178687-corner-radius-end-mill-5-8-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}