{"product_id":"accupro-12178682-corner-radius-end-mill-1in-5-flute-altin","title":"Accupro 12178682 Corner Radius End Mill 1in 5-flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12178682 is a solid carbide corner radius end mill designed for high-performance milling in demanding machining environments. With a 1-inch cutting diameter, a 0.03-inch corner radius, and five flutes, this tool is built for rigidity and chip evacuation in deep-reach applications. The AlTiN coating provides oxidation resistance and hardness retention at elevated temperatures, making it well suited for dry or high-speed machining of ferrous materials and hardened steels. It is a single-end, centercutting design with right-hand flute direction and right-hand cutting direction, giving machinists full plunge and side-milling capability from one tool.\u003c\/p\u003e\u003cp\u003eThis end mill is used in CNC machining centers and manual mills where corner radius geometry is required to reduce stress concentrations and increase tool life on finished surfaces. At 6 inches overall length with a 3.375-inch length of cut, it handles deep-cavity and long-reach operations without sacrificing rigidity. Variable index geometry reduces harmonic vibration during aggressive cuts. Micrograin carbide substrate supports higher surface footage than standard carbide grades. This tool is appropriate for job shops, aerospace component machining, die and mold work, and precision part manufacturing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.03-inch corner radius reduces edge chipping and improves surface finish on inside radii\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides thermal resistance for dry or high-speed machining of ferrous and hardened materials\u003c\/li\u003e\n\u003cli\u003eFive-flute design increases material removal rates compared to four-flute equivalents at the same RPM\u003c\/li\u003e\n\u003cli\u003eVariable index flute spacing reduces harmonic resonance and chatter during heavy cuts\u003c\/li\u003e\n\u003cli\u003eMicrograin carbide substrate allows higher cutting speeds and longer tool life\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry enables plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers and manual knee mills accepting a 1-inch straight shank end mill with ER or side-lock toolholding systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and machine is in an e-stop or locked-out state before inserting or removing the tool. Use a calibrated torque wrench on set-screw or collet holders to avoid shank damage; consult the toolholder manufacturer specifications for clamping torque. Verify runout with a dial indicator after installation before beginning a cut, as excessive runout will accelerate flute wear and degrade surface finish.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.03 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: 0.00150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12178682\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51735246045490,"sku":"12178682","price":706.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/492048aa1468da276bba37788785bdf2_25378ace-5a68-48b9-85ff-2f20dc219c3d.jpg?v=1788770873","url":"https:\/\/voomisupply.com\/products\/accupro-12178682-corner-radius-end-mill-1in-5-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}