{"product_id":"accupro-10419-solid-carbide-jobber-drill-bit-3-8-inch","title":"Accupro 10419 Solid Carbide Jobber Drill Bit 3\/8 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 10419 is a solid carbide jobber length drill bit designed for precision drilling in demanding shop and field applications. It measures 3\/8 inch (0.3750 inch) in diameter with a 150-degree standard point angle and a 4.25-inch overall length. The three-flute spiral design promotes chip evacuation and improves feed stability compared to conventional two-flute geometry. The bright, uncoated finish is suitable for a wide range of workpiece materials. Right-hand cutting direction and a straight cylindrical shank allow direct chuck mounting. This bit follows ANSI specification standards and is sold as a single unit.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for machinists, tool-and-die tradespeople, maintenance technicians, and fabricators working in production or MRO environments. The 5xD flute-to-diameter ratio supports deeper hole entry without excessive regrind cycles. At 3\/8 inch diameter, it fits within the 0.3500 to 0.4000 inch drill bit size range, making it a common selection for tapped hole prep, clearance holes, and through-hole work in metal, composite, and similar materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and long tool life in abrasive or hard materials\u003c\/li\u003e\n  \u003cli\u003e150-degree standard point angle reduces thrust and improves self-centering on entry\u003c\/li\u003e\n  \u003cli\u003eThree-flute spiral design promotes faster chip evacuation compared to two-flute bits\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish maintains sharp edge geometry without coating buildup\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with straight cylindrical shank for direct compatibility with standard drill chucks and collets\u003c\/li\u003e\n  \u003cli\u003eANSI specification designation ensures dimensional conformance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a jobber length drill bit compatible with standard drill chucks and collet holders accepting a straight cylindrical shank in the 3\/8 inch diameter range, conforming to ANSI jobber length specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall and remove this bit only with the machine fully powered down and the spindle at a complete stop. Secure the straight cylindrical shank firmly in a properly sized chuck or collet to prevent runout. Solid carbide tooling is brittle and can fracture if subjected to side loads or dropped on hard surfaces — handle with care during setup and storage. Always follow applicable shop safety standards and machine tool manufacturer guidelines when selecting speeds and feeds.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 150 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 5xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size Range\u003c\/strong\u003e: 0.3500 to 0.4000 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10419\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51750712213810,"sku":"10419","price":173.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/05dc6467d7b08d0171071a48ad02a72f.jpg?v=1788918874","url":"https:\/\/voomisupply.com\/products\/accupro-10419-solid-carbide-jobber-drill-bit-3-8-inch","provider":"Voomi Supply","version":"1.0","type":"link"}