{"product_id":"accuform-manufacturing-tar140-danger-do-not-enter-tag-250-roll","title":"Accuform Manufacturing TAR140 Danger Do Not Enter Tag 250\/roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUFORM MANUFACTURING TAR140 is a by-the-roll accident prevention tag designed for lockout\/tagout and restricted-access applications. Each tag measures 6.25 inches by 3 inches and is made from pulp-free cardstock that resists cracking, distortion, and shrinkage under typical field conditions. The matte surface accepts pen or marker writing without smearing. Tags ship in an octagon-shaped cardboard dispenser measuring 6.625 inches by 6.625 inches by 3.625 inches with a 1.5-inch perforated center hole for portable mounting. A roll of 250 tags keeps a high-volume supply on hand for facilities with frequent equipment lockouts or zone restrictions. Compliant with OSHA 29 CFR 1910.145 and ANSI Z535 requirements.\u003c\/p\u003e\n\u003cp\u003eThis tag is used in industrial, commercial, and utility settings where personnel must be warned not to enter a work zone or operate locked-out equipment. The roll-dispenser format is well suited for maintenance crews, safety coordinators, and contractors who tag multiple assets during a single shift. Tags pull out individually and tear off cleanly from the roll, reducing downtime at the point of application. The Danger Do Not Enter legend is printed in high-visibility, multi-colored graphics that meet established safety-color standards.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePulp-free cardstock construction resists cracking, distortion, and shrinkage\u003c\/li\u003e\n  \u003cli\u003eScuff-resistant matte surface accepts pen or permanent marker\u003c\/li\u003e\n  \u003cli\u003e250 tags per roll for high-volume lockout\/tagout programs\u003c\/li\u003e\n  \u003cli\u003eOctagon-shaped dispenser with 1.5-inch perforated center hole for portable mounting\u003c\/li\u003e\n  \u003cli\u003eMulti-colored Danger Do Not Enter legend for high visibility\u003c\/li\u003e\n  \u003cli\u003eCompliant with OSHA 29 CFR 1910.145 and ANSI Z535\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard accident prevention tag for use in lockout\/tagout programs across industrial, commercial, and utility environments where OSHA 29 CFR 1910.145 and ANSI Z535 compliance is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSafety tags should be applied by a qualified worker or safety-authorized personnel following the site lockout\/tagout procedure. Before tagging, de-energize or isolate the equipment per applicable OSHA and facility-specific energy control procedures. Tags attach through the center hole using a standard plastic tie, cable, or loop string. Remove and dispose of tags only after the hazard has been fully controlled and the equipment has been cleared for return to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTag Size\u003c\/strong\u003e: 6.25 inches x 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispenser Size\u003c\/strong\u003e: 6.625 inches x 6.625 inches x 3.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Hole Diameter\u003c\/strong\u003e: 1.5 inches (perforated)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Pulp-free cardstock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface Finish\u003c\/strong\u003e: Matte, scuff-resistant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity Per Roll\u003c\/strong\u003e: 250 tags\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Multi-colored\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e: OSHA 29 CFR 1910.145, ANSI Z535\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUFORM MANUFACTURING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TAR140\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUFORM","offers":[{"title":"Default Title","offer_id":68062912774450,"sku":"TAR140","price":167.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/56a4e7fdaa9abe6a2109913206e38d6a.jpg?v=1793052237","url":"https:\/\/voomisupply.com\/products\/accuform-manufacturing-tar140-danger-do-not-enter-tag-250-roll","provider":"Voomi Supply","version":"1.0","type":"link"}