{"product_id":"abbott-workholding-products-ktt10p1-soft-lathe-chuck-jaw","title":"Abbott Workholding Products KTT10P1 Soft Lathe Chuck Jaw","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ABBOTT WORKHOLDING PRODUCTS KTT10P1 is a soft lathe chuck jaw designed for precision turning applications on the shop floor. Manufactured from 6061 aluminum, this serrated-interface jaw allows machinists to bore the jaw face to a custom diameter, providing a secure, repeatable grip on finished or near-finished workpieces. The serrated mounting interface locks the jaw firmly to the chuck body, and the 10-inch overall width matches 10-inch chuck diameter requirements. Each set consists of 3 jaws. Installation and use are handled by machinists and CNC lathe operators in job shop, production, and toolroom environments.\u003c\/p\u003e\n\u003cp\u003eThese soft jaws are suited for 10-inch lathe chucks in both manual and CNC turning centers. The round jaw shape and serrated interface are common in production environments where workholding repeatability and the ability to re-bore jaws to custom part diameters are priorities. The 6061 aluminum construction keeps rotational mass low while still providing the structural integrity needed for light to moderate turning loads. Typical applications include second-operation turning, gripping delicate or pre-machined surfaces, and fixture-style workholding where steel hard jaws would risk marring part geometry.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSerrated jaw interface for positive, repeatable chuck body engagement\u003c\/li\u003e\n  \u003cli\u003e6061 aluminum construction reduces chuck rotating mass compared to steel jaws\u003c\/li\u003e\n  \u003cli\u003eRound jaw shape compatible with 10-inch chuck diameter\u003c\/li\u003e\n  \u003cli\u003eSoft jaw design allows field-boring to custom grip diameters\u003c\/li\u003e\n  \u003cli\u003e3-jaw set for standard 3-jaw scroll chuck configurations\u003c\/li\u003e\n  \u003cli\u003e0.6300-inch slot width and 1.1811-inch mount hole center distance for precise fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for 10-inch diameter lathe chucks requiring a serrated-interface soft jaw with a 1.1811-inch distance between mount hole centers, a 0.4724-inch fastener size, and a 0.6300-inch slot width. Verify chuck manufacturer specifications before ordering to confirm interface geometry match.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSoft lathe chuck jaws are installed and bored by qualified machinists. Before installing or removing chuck jaws, isolate and lock out the lathe spindle drive in accordance with applicable machine safety procedures. Secure all jaw fasteners to the chuck manufacturer's specified torque using appropriate hex or socket tooling. After boring soft jaws to the required grip diameter, always run a test fit and verify jaw seating before mounting a workpiece under power.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: 6061\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Interface Type\u003c\/strong\u003e: Serrated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width \/ Diameter\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDistance Between Mount Hole Centers\u003c\/strong\u003e: 1.1811 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Size\u003c\/strong\u003e: 0.4724 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Width\u003c\/strong\u003e: 0.6300 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove Width\u003c\/strong\u003e: 0.6299 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Chuck Diameter\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Jaws\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 31.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ABBOTT WORKHOLDING PRODUCTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: KTT10P1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABBOTT WORKHOLDING","offers":[{"title":"Default Title","offer_id":67911851868466,"sku":"KTT10P1","price":388.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a4d5a32cb9ce66d84e502609b0a434b3.jpg?v=1791221772","url":"https:\/\/voomisupply.com\/products\/abbott-workholding-products-ktt10p1-soft-lathe-chuck-jaw","provider":"Voomi Supply","version":"1.0","type":"link"}