{"product_id":"abbott-workholding-ktt10a3-soft-lathe-chuck-jaw-serrated","title":"Abbott Workholding KTT10A3 Soft Lathe Chuck Jaw Serrated","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ABBOTT WORKHOLDING PRODUCTS KTT10A3 is a serrated soft lathe chuck jaw machined from 6061-T6 aluminum. Soft jaws are re-machinable to a specific bore or contour, allowing a lathe operator to hold irregular, finished, or delicate workpieces without damage. This jaw measures 2.0 inches overall width, 3.0 inches overall height, and 5.5 inches overall length. The serrated interface mates to standard serrated chuck jaw slides, providing positive registration and repeatable positioning. The 6061-T6 aluminum construction keeps rotating mass low while delivering enough hardness for light to medium turning operations. Licensed machinists and CNC lathe operators are the primary installers and users of this component.\u003c\/p\u003e\u003cp\u003eThis soft jaw is designed for use on lathes equipped with a 3-jaw chuck rated for up to 10.0 inches maximum chuck diameter. The serrated jaw interface and 0.4724-inch fastener size are matched to chucks with a 1.1811-inch distance between mount hole centers and a 0.6300-inch slot width. Typical applications include precision part holding on manual engine lathes and CNC turning centers in job shop, production machining, and toolroom environments. A set of 3 jaws is required for a complete installation, and this listing covers a single jaw.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6061-T6 aluminum construction  -  lightweight, re-machinable, and corrosion resistant\u003c\/li\u003e\n\u003cli\u003eSerrated jaw interface for positive seating and repeatable jaw positioning\u003c\/li\u003e\n\u003cli\u003eCompatible with chucks up to 10.0 inches in diameter\u003c\/li\u003e\n\u003cli\u003e1.1811-inch mount hole center spacing matches standard serrated chuck slide patterns\u003c\/li\u003e\n\u003cli\u003e0.4724-inch fastener size for secure jaw retention\u003c\/li\u003e\n\u003cli\u003eSquare jaw shape supports uniform bore machining and concentric workholding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with serrated 3-jaw lathe chucks with a maximum compatible chuck diameter of 10.0 inches, a mount hole center distance of 1.1811 inches, and a slot width of 0.6300 inches. Verify chuck jaw interface specifications before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSoft jaws are installed and bored in-place by a qualified machinist or CNC lathe operator. Before removing or installing chuck jaws, power down the lathe and confirm the spindle has come to a complete stop. Use the correct fastener size as specified by the chuck manufacturer and torque jaw bolts evenly to prevent jaw distortion. Soft jaws must be bored to the required diameter while mounted in the chuck to ensure concentricity  -  never pre-machine a bore offline and expect it to run true after installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: 6061-T6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJaw Shape\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJaw Interface Type\u003c\/strong\u003e: Serrated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Jaws (per set)\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Compatible Chuck Diameter\u003c\/strong\u003e: 10.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 2.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 3.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance Between Mount Hole Centers\u003c\/strong\u003e: 1.1811 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastener Size\u003c\/strong\u003e: 0.4724 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot Width\u003c\/strong\u003e: 0.6300 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 7.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ABBOTT WORKHOLDING PRODUCTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: KTT10A3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABBOTT WORKHOLDING","offers":[{"title":"Default Title","offer_id":67908693295410,"sku":"KTT10A3","price":123.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/24161f64f19c6463e7a2e2395e164a34.jpg?v=1791184444","url":"https:\/\/voomisupply.com\/products\/abbott-workholding-ktt10a3-soft-lathe-chuck-jaw-serrated","provider":"Voomi Supply","version":"1.0","type":"link"}