{"product_id":"3m-fp0-375cr6in-p-heat-shrink-tubing-0-375-in-clear-6-in","title":"3M FP0.375CR6IN-P Heat Shrink Tubing 0.375 in Clear 6 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe 3M FP0.375CR6IN-P is a thin-wall, flexible polyolefin heat shrink tubing from the FP-301 series, sold in a 10-piece pack. It features a 2:1 shrink ratio, with a minimum expanded diameter of 0.375 inches and a maximum recovered diameter of 0.187 inches. Each piece is 6 inches long and clear in color, making it easy to inspect connections after installation. Rated at 600 volts and carrying both UL and CSA approvals, this tubing suits insulation, strain relief, and bundling tasks in electrical and low-voltage wiring applications. Wall thickness is 0.025 inches. The temperature rating spans -55 to 135 degrees C, supporting a wide range of service environments.\u003c\/p\u003e\n\u003cp\u003eThis tubing is used by electricians, electronics technicians, and panel builders working on wire splices, terminal insulation, harness protection, and connector strain relief. The clear color allows visual confirmation of the conductor or connection beneath the shrunk tubing without removal. At 6 inches per piece, it is well suited for individual terminations and short runs. The FP-301 series is a standard in residential, commercial, and light industrial electrical work where a flexible, low-profile insulating sleeve is needed over conductors rated up to 600 volts.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2:1 shrink ratio with 0.375 inch expanded and 0.187 inch recovered diameter\u003c\/li\u003e\n  \u003cli\u003e600-volt rating with UL and CSA approvals\u003c\/li\u003e\n  \u003cli\u003eTemperature range: -55 to 135 degrees C\u003c\/li\u003e\n  \u003cli\u003eThin-wall construction at 0.025 inch wall thickness\u003c\/li\u003e\n  \u003cli\u003eClear color for post-installation visual inspection\u003c\/li\u003e\n  \u003cli\u003ePack of 10 pieces, each 6 inches in length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard thin-wall polyolefin heat shrink sleeve for use on electrical conductors, splices, and terminals rated up to 600 volts where UL- and CSA-listed insulation protection is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eElectricians and electronics technicians apply this tubing using a heat gun or similar radiant heat source — open flame is not recommended for polyolefin tubing. De-energize all circuits before applying heat shrink to any live wiring. Position the tubing over the connection before applying heat, and apply heat evenly along the length to achieve a uniform shrink. Follow applicable NEC requirements for insulation ratings and conductor protection in the specific installation environment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Flexible Polyolefin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Clear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShrink Ratio\u003c\/strong\u003e: 2:1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Expanded Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Recovered Diameter\u003c\/strong\u003e: 0.187 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength per Piece\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage Rating\u003c\/strong\u003e: 600 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: -55 to 135 degrees C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL, CSA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Pack\u003c\/strong\u003e: 10 pieces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 9 inches L x 9 inches W x 3.75 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: US\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: 3M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: FP0.375CR6IN-P\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":51284096844082,"sku":"FP0.375CR6IN-P","price":19.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279527.jpg?v=1781068506","url":"https:\/\/voomisupply.com\/products\/3m-fp0-375cr6in-p-heat-shrink-tubing-0-375-in-clear-6-in","provider":"Voomi Supply","version":"1.0","type":"link"}