{"product_id":"3m-7100199498-trizact-217ea-abrasive-belt-48x8-inch-ao","title":"3M 7100199498 Trizact 217EA Abrasive Belt 48x8 Inch Ao","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe 3M 7100199498 is a Trizact 217EA abrasive belt designed for intermediate finishing and fine polishing applications on metal surfaces. It uses 3M proprietary microreplication technology in which micron-graded aluminum oxide abrasive particles are formed into uniform pyramidal structures and bonded to a JE-weight rayon backing. As the pyramids wear during use, fresh sharp mineral is continuously exposed, delivering a consistent cut rate and a predictable, fine surface finish from start to end of belt life. The belt measures 48 inches in length and 8 inches in width. It is well suited for use in robotic grinding and finishing cells where process consistency is critical.\u003c\/p\u003e\u003cp\u003eThis belt is intended for light to intermediate pressure finishing operations on metal workpieces prior to plating, buffing, or final surface treatment. The flexible JE-weight rayon backing conforms to contoured and complex surface geometries, maintaining uniform contact across the abrasive face. A built-in grinding aid helps manage heat generation during extended runs, reducing the risk of heat-related workpiece warping or discoloration. Typical applications include fabrication shops, aerospace component finishing, and automated polishing lines where repeatable surface finish results are required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicroreplicated aluminum oxide pyramids continuously expose fresh mineral as they wear, maintaining consistent cut throughout belt life\u003c\/li\u003e\n\u003cli\u003eFlexible JE-weight rayon backing conforms to contoured and irregular workpiece surfaces\u003c\/li\u003e\n\u003cli\u003eGrinding aid reduces heat buildup, helping prevent warping and discoloration of finished parts\u003c\/li\u003e\n\u003cli\u003eProduces finer surface finishes than conventional coated abrasive belts\u003c\/li\u003e\n\u003cli\u003eEngineered for reliability in robotic and automated finishing applications\u003c\/li\u003e\n\u003cli\u003eSuited for light-pressure use cases where controlled abrasive breakdown is needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on belt finishing machines and robotic grinding cells accepting belts measuring 48 inches in length and 8 inches in width. Intended for metal finishing operations prior to plating or buffing.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machine operator or industrial maintenance technician following the equipment manufacturer's belt-change procedures. Power down and de-energize the belt finishing machine completely before removing the spent belt or installing a new one. Confirm belt tracking alignment after installation and run the machine briefly at low speed before returning to full production. Verify that belt direction-of-travel arrows, if present, match the machine drive direction.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Length\u003c\/strong\u003e: 48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt Width\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Mineral\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: JE-weight rayon cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Technology\u003c\/strong\u003e: Trizact microreplication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Intermediate finishing and fine polishing prior to plating or buffing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 7.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 068060523049\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: 3M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7100199498\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":51344403366194,"sku":"7100199498","price":748.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310535556.jpg?v=1782035071","url":"https:\/\/voomisupply.com\/products\/3m-7100199498-trizact-217ea-abrasive-belt-48x8-inch-ao","provider":"Voomi Supply","version":"1.0","type":"link"}