{"product_id":"3m-7010368537-non-woven-buff-and-blend-hs-disc-10-inch","title":"3M 7010368537 Non-woven Buff and Blend Hs Disc 10 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe 3M 7010368537 is a high-strength non-woven nylon abrasive disc designed for light deburring, surface cleaning, and final finishing on metalwork. Built on a dense, open-web construction with Aluminum Oxide mineral, it delivers a consistent, smear-free scratch pattern on both ferrous and non-ferrous metals. The disc measures 10 inches in diameter with a 1\/2-inch arbor hole. Its stiff nylon matrix resists folding under pressure and stays open to resist loading, making it a reliable choice for production-rate edgework and irregular surface profiles. Metal fabricators, maintenance machinists, and industrial finishing technicians are the primary installers of this disc type.\u003c\/p\u003e\u003cp\u003eThis disc is suited for light deburring and final finishing applications in metal fabrication, maintenance, and surface prep environments. The open-web structure handles irregular surfaces and edges without gouging the substrate. It performs on aluminum, stainless steel, mild steel, and other common shop metals. The Buff and Blend HS line is available in three grades — Coarse (CRS, green), Medium (MED, blue), and Very Fine (VFN, maroon) — allowing the technician to match aggressiveness to the finish requirement. This listing covers one disc sold individually (each).\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-strength non-woven nylon construction resists tearing, fraying, and folding under pressure\u003c\/li\u003e\n\u003cli\u003eAluminum Oxide mineral cuts sharp and produces a uniform, consistent scratch pattern on ferrous and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eOpen web is load-resistant, limiting debris buildup and extending disc service life\u003c\/li\u003e\n\u003cli\u003eSmear-free finish suitable for final finishing and polishing stages\u003c\/li\u003e\n\u003cli\u003eAvailable in Coarse, Medium, and Very Fine grades to match varying aggressiveness and finish requirements\u003c\/li\u003e\n\u003cli\u003e1\/2-inch center arbor hole for standard disc grinder and finishing machine spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a center-hole non-woven abrasive disc for use with angle grinders, disc sanders, and finishing machines fitted with a 1\/2-inch arbor and capable of accepting a 10-inch diameter disc.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of abrasive discs should be performed by qualified machinists or fabricators following the machine manufacturer's guard and RPM rating requirements. Always verify the disc's maximum operating speed does not exceed the rated speed of the drive tool before mounting. Power down and lock out the machine before mounting or removing the disc. Inspect the disc for damage before each use and replace immediately if tearing or delamination is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Diameter\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor Hole Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Mineral\u003c\/strong\u003e: Aluminum Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Construction\u003c\/strong\u003e: Non-woven nylon web\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Grades\u003c\/strong\u003e: Coarse (CRS), Medium (MED), Very Fine (VFN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 33.75 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 20.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 20.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 20.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: 3M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7010368537\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":51342929723698,"sku":"7010368537","price":2275.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310528929.jpg?v=1782010926","url":"https:\/\/voomisupply.com\/products\/3m-7010368537-non-woven-buff-and-blend-hs-disc-10-inch","provider":"Voomi Supply","version":"1.0","type":"link"}