{"product_id":"3m-7000149317-heat-shrink-cable-sleeve-1kv-6in-itcsn","title":"3M 7000149317 Heat Shrink Cable Sleeve 1kv 6in Itcsn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe 3M 7000149317 is a heavy-wall heat shrink cable sleeve in the ITCSN-1100 series, designed for electrical splices, connections, and terminations up to 1 kV. Constructed from cross-linked polyolefin with a factory-applied internal adhesive and sealant, it delivers mechanical and environmental protection once shrunk in place. The sleeve accepts wire sizes from 2 AWG through 4\/0 AWG, with a supplied inner diameter of 1.10 inches recovering to 0.37 inches. The 6-inch cut-to-length design is split resistant and fast shrinking, reducing installation time on the job. Licensed electricians and utility splice technicians are the primary installers of this product.\u003c\/p\u003e\n\u003cp\u003eThis sleeve is suited for residential, commercial, and light industrial electrical applications where a reliable, moisture-resistant splice or termination is required. It is used on power cables, feeder runs, and service entrance conductors within the 2 AWG to 4\/0 AWG range. The adhesive liner creates a waterproof seal when the sleeve is fully recovered, making it appropriate for both indoor and direct-exposure outdoor installations. Each sleeve is sold individually as a single 6-inch piece.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCross-linked polyolefin construction — highly split resistant and dimensionally stable after recovery\u003c\/li\u003e\n  \u003cli\u003eFactory-applied internal adhesive and sealant provides a watertight environmental seal\u003c\/li\u003e\n  \u003cli\u003eFast shrink rate for rapid installation, reducing time on splice and termination work\u003c\/li\u003e\n  \u003cli\u003eRated to 1 kV; UL Listed 486D for 600V (File Number E102356); CSA rated\u003c\/li\u003e\n  \u003cli\u003eSupplied inner diameter of 1.10 inches recovering to 0.37 inches — fits 2 AWG through 4\/0 AWG conductors\u003c\/li\u003e\n  \u003cli\u003e6-inch length suitable for standard splice and termination coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 2 AWG through 4\/0 AWG copper or aluminum conductors in splicing, connection, and termination applications rated up to 1 kV.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified electrician following applicable NEC requirements. De-energize and lock out the circuit before beginning any splice or termination work. Apply heat evenly along the sleeve using an appropriate heat gun, working from the center outward to avoid trapping air under the adhesive liner. Do not use an open flame, as uneven heat can cause incomplete recovery or damage to the sleeve material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage Rating\u003c\/strong\u003e: 1 kV (UL Listed 486D at 600V)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Range\u003c\/strong\u003e: 2 AWG to 4\/0 AWG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupplied Inner Diameter\u003c\/strong\u003e: 1.10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecovered Inner Diameter\u003c\/strong\u003e: 0.37 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cross-linked polyolefin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Liner\u003c\/strong\u003e: Factory-applied adhesive and sealant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUL Listing\u003c\/strong\u003e: 486D, File Number E102356\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCSA Rating\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUOM\u003c\/strong\u003e: Each\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 25\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: 3M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7000149317\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":51346501239090,"sku":"7000149317","price":337.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310535278.jpg?v=1782082095","url":"https:\/\/voomisupply.com\/products\/3m-7000149317-heat-shrink-cable-sleeve-1kv-6in-itcsn","provider":"Voomi Supply","version":"1.0","type":"link"}