{"product_id":"3m-7000148185-flap-disc-7-inch-60-grit-cubitron-ii-967a","title":"3M 7000148185 Flap Disc 7 Inch 60 Grit Cubitron Ii 967A","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe 3M 7000148185 is a 7-inch, 60-grit right-angle flap disc in the Cubitron II 967A series, built for medium-pressure grinding and surface preparation on flat and contoured workpieces. It uses 3M Precision-Shaped Grain, a ceramic abrasive technology that fractures along engineered lines to expose sharp cutting edges throughout the disc life. This design delivers a consistently fast cut rate without the need for added operator pressure. Licensed tradespeople and fabricators typically reach for this disc for weld leveling, light deburring, and surface prep ahead of paint or coating application on mild steel and stainless steel.\u003c\/p\u003e\u003cp\u003eThe 967A flap disc is suited for fabrication shops and job-site metalwork where finish quality matters alongside material removal rate. Its poly-cotton backing provides controlled, even wear under medium unit pressure, making it effective on both flat surfaces and contoured profiles. Stainless steel fabrication applications benefit from the disc's reduced tendency to gouge compared to fiber discs and bonded grinding wheels, helping protect surface finish and maintain dimensional tolerances.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3M Precision-Shaped Grain abrasive for fast, consistent cut rate throughout disc life\u003c\/li\u003e\n\u003cli\u003eIndividual flaps break down progressively, continuously exposing fresh mineral\u003c\/li\u003e\n\u003cli\u003ePoly-cotton backing supports controlled, even wear under medium unit pressure\u003c\/li\u003e\n\u003cli\u003eReduced gouging compared to fiber discs and bonded wheels\u003c\/li\u003e\n\u003cli\u003eEffective on mild steel and stainless steel surfaces\u003c\/li\u003e\n\u003cli\u003eRight-angle configuration for use with standard right-angle grinders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with right-angle grinders that accept 7-inch flap discs. Suitable for weld leveling, light deburring, and surface preparation on mild steel and stainless steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and disc changes must be performed with the grinder powered off and unplugged or battery removed. Verify the grinder's rated RPM meets or exceeds the disc's maximum RPM before mounting. Inspect the disc for damage before each use and discard any disc that shows cracking, fraying, or delamination. Always wear appropriate PPE including a face shield, hearing protection, and gloves when operating angle grinders with abrasive discs.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Diameter\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrit\u003c\/strong\u003e: 60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Type\u003c\/strong\u003e: Right Angle Flap Disc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasive Mineral\u003c\/strong\u003e: 3M Precision-Shaped Grain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Poly-Cotton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.54 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 7.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 7.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 6.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 00051141556123\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: 3M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7000148185\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":51347588088114,"sku":"7000148185","price":98.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310533688.jpg?v=1782108999","url":"https:\/\/voomisupply.com\/products\/3m-7000148185-flap-disc-7-inch-60-grit-cubitron-ii-967a","provider":"Voomi Supply","version":"1.0","type":"link"}