{"product_id":"3m-7000123383-fine-line-tape-215-blue-0-75in-x-60yd-4-8mil","title":"3M 7000123383 Fine Line Tape 215 Blue 0.75in X 60yd 4.8mil","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe 3M 7000123383 is a film-backed fine line masking tape designed to produce clean, sharp paint lines on highly contoured and irregular surfaces. At 4.8 mil total thickness, the tape maintains a low profile that minimizes paint bleed and edge buildup. It conforms around corners, into depressed areas, and along complex body contours without lifting. The smooth film backing allows application directly over freshly cured acrylic lacquer, enamel, and polyurethane finishes. Rated for use up to 250 degrees F, it holds its bond and line definition under elevated paint booth temperatures. Supplied in a 0.75-inch-wide by 60-yard roll.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for automotive refinishing, industrial coating, and sign painting applications where a precise color separation line is required on curved or irregular substrates. Body shop technicians and industrial painters use it when standard crepe-backed masking tape cannot conform tightly enough to the surface geometry. It is intended for indoor use only and should not be used in outdoor or prolonged UV-exposure applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLow-profile 4.8 mil thickness reduces paint edge buildup for a clean color line\u003c\/li\u003e\n  \u003cli\u003eConforms to complex contours and irregular surfaces without lifting at corners or in recessed areas\u003c\/li\u003e\n  \u003cli\u003eRated for use up to 250 degrees F — suitable for standard paint booth cure cycles\u003c\/li\u003e\n  \u003cli\u003eSmooth film backing compatible with acrylic lacquer, enamel, and polyurethane topcoats\u003c\/li\u003e\n  \u003cli\u003eAdhesion to steel: 42 oz per inch of width\u003c\/li\u003e\n  \u003cli\u003eTensile strength: 10 lbs per inch of width with 830 percent elongation at break\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for application over freshly cured acrylic lacquer, enamel, and polyurethane paint systems on automotive and industrial surfaces. Not intended for outdoor or UV-exposed applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSurface must be clean, dry, and fully cured before applying tape. Press the tape edge firmly along the desired paint line to ensure full contact and prevent bleed-through. Remove tape at a low angle while the topcoat is still slightly warm for cleanest edge release. This product is intended for use by experienced automotive refinishing technicians and industrial painters familiar with masking procedures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 4.8 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: 42 oz per inch of width\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 10 lbs per inch of width\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElongation at Break\u003c\/strong\u003e: 830 percent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Use Range\u003c\/strong\u003e: Up to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Film\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.29 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: 3M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7000123383\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":51345939530034,"sku":"7000123383","price":4493.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310517262.jpg?v=1782066941","url":"https:\/\/voomisupply.com\/products\/3m-7000123383-fine-line-tape-215-blue-0-75in-x-60yd-4-8mil","provider":"Voomi Supply","version":"1.0","type":"link"}