{"title":"VYBOND","description":null,"products":[{"product_id":"vybond-1915651-line-set-tape-white-uv-resistant","title":"Vybond 1915651 Line Set Tape White Uv-resistant","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 1915651 is a white polypropylene film tape engineered for securing and protecting insulated line sets on HVACR systems. It uses an aggressive acrylic adhesive that delivers high initial adhesion and maintains bond strength over the long term. The film is UV resistant, making it suitable for outdoor or exposed installations where sunlight degradation is a concern. Rated for service temperatures from 0 to 210 degrees F, this tape holds up across the full range of conditions encountered in residential and light commercial HVACR work. Licensed HVAC technicians and refrigeration mechanics are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis tape is designed for use on foam pipe insulation covering refrigerant line sets on split-system air conditioning and heat pump installations. It performs well in both indoor and outdoor applications, including rooftop units and exposed suction-line runs. It serves as a direct alternative to cloth duct tape where long-term durability is required, resisting deterioration that cloth tape can experience after prolonged UV and weather exposure. Typical use cases include bundling suction and liquid lines, securing insulation seams, and wrapping line set penetrations at the wall or roof.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUV-resistant polypropylene film construction resists sun degradation on exposed line set runs\u003c\/li\u003e\n  \u003cli\u003eAggressive acrylic adhesive provides high initial tack and long-term bond retention\u003c\/li\u003e\n  \u003cli\u003eProven adhesion to foam pipe insulation without delamination or peel-back over time\u003c\/li\u003e\n  \u003cli\u003eService temperature range of 0 to 210 degrees F covers typical HVACR operating conditions\u003c\/li\u003e\n  \u003cli\u003eDurable alternative to cloth duct tape for outdoor and long-term insulation applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with foam pipe insulation on HVACR refrigerant line sets in residential and light commercial split-system installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tape is applied by HVAC technicians and refrigeration mechanics during line set installation or re-insulation service. Surfaces should be clean, dry, and free of dust or oil before application to ensure full adhesive contact. No special tools are required, but firm hand pressure along the full tape length helps seat the adhesive against foam insulation surfaces. Follow applicable local mechanical codes for line set protection and insulation requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polypropylene film with acrylic adhesive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: 0 to 210 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV Resistance\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1915651\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51138561081650,"sku":"1915651","price":16.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/305533068.jpg?v=1778259193"},{"product_id":"vybond-1915650-lineset-tape-black-48mm-x-55m","title":"Vybond 1915650 Lineset Tape Black 48mm X 55m","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 1915650 is a black printed lineset wrap tape designed for protecting and bundling refrigerant linesets in HVAC installations. Measuring 48mm wide and 55 meters long per roll, this tape provides a clean, professional finish over lineset insulation on split-system air conditioners, heat pumps, and mini-split installations. HVAC technicians use it to secure and weatherproof lineset assemblies running along exterior walls or rooftop equipment. The printed black finish gives a uniform appearance on completed jobs while holding insulation tightly against the lineset throughout the run.\u003c\/p\u003e\u003cp\u003eThis tape is suited for residential and light commercial HVAC work where lineset protection and appearance matter. It is applied over foam insulation on suction and liquid lines running from the condensing unit to the air handler or indoor head unit. The 55-meter roll length reduces the number of roll changes on longer lineset runs, making it a practical choice for multi-story installs or extended exterior runs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e48mm wide for consistent coverage over standard lineset insulation\u003c\/li\u003e\n\u003cli\u003e55-meter roll length reduces splicing on longer runs\u003c\/li\u003e\n\u003cli\u003eBlack printed finish for clean, professional appearance\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for lineset wrap applications\u003c\/li\u003e\n\u003cli\u003eSuitable for use on residential and light commercial HVAC linesets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style lineset wrap tape for use on refrigerant lineset assemblies in split-system and mini-split HVAC installations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eLineset tape is installed by HVAC technicians after refrigerant lines are run, insulated, and pressure-tested. Ensure the insulation surface is clean and dry before applying tape to promote adhesion. Wrap with consistent tension and overlap each pass to avoid gaps that can allow moisture intrusion or UV exposure. Follow local mechanical codes for lineset protection requirements in exposed outdoor applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 48mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 55 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Lineset wrap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Lineset Tape\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1915650\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51138952167730,"sku":"1915650","price":16.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/305533071.png?v=1778266504"},{"product_id":"vybond-444-black_2x60yd-line-set-tape-2in-x-60yd-3-mil-black","title":"Vybond 444-BLACK_2X60YD Line Set Tape 2in X 60yd 3 Mil Black","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 444-BLACK_2X60YD is a black OPP film-backed line set tape designed for long-term protection of HVAC refrigerant line sets. It measures 2 inches wide by 60 yards long with a 3 mil thickness. The tape uses an acrylic adhesive system that delivers an aggressive bond without flagging or lifting over time. UV resistance makes it suitable for outdoor and exposed installations. Low VOC content and solvent-free construction reduce odor during application. HVAC technicians use this tape as a durable alternative to cloth tape where extended service life and weather resistance are required.\u003c\/p\u003e\u003cp\u003eThis tape is applied to HVAC line sets in both residential and commercial installations. It is well suited for outdoor line set runs exposed to sunlight, moisture, and temperature extremes. The temperature rating of -40 to 212 degrees F covers the full range of typical HVAC operating environments. The hand-tearable design speeds up field application without cutting tools. Mold and moisture resistance adds long-term durability in humid climates or enclosed chases.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOPP film backing with acrylic adhesive for aggressive, lasting bond\u003c\/li\u003e\n\u003cli\u003eUV resistant construction suitable for outdoor line set runs\u003c\/li\u003e\n\u003cli\u003eHand tearable for fast field application without tools\u003c\/li\u003e\n\u003cli\u003eLow VOC, solvent-free formula reduces odor during install\u003c\/li\u003e\n\u003cli\u003eMold and moisture resistant for humid or wet environments\u003c\/li\u003e\n\u003cli\u003eCan contribute toward LEED EQ Credit 4.1 Low Emitting Materials compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a long-term protective wrap for HVAC refrigerant line sets and serves as a direct alternative to cloth tape in residential and commercial applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eApplied by HVAC technicians during line set installation or re-wrap service. No tools are required for tearing; the tape can be applied directly by hand along the line set run. Ensure the surface is clean and dry before application to achieve full adhesive contact. Follow local mechanical codes and manufacturer guidelines for line set covering requirements in your jurisdiction.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Line Set Tape, 1-Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: OPP Film\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Material\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: -40 to 212 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Content\u003c\/strong\u003e: Low VOC, Solvent-Free\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicable Standards\u003c\/strong\u003e: PSTC-101, LEED\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 444-BLACK_2X60YD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51284085014834,"sku":"444-BLACK_2X60YD","price":19.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309277731.jpg?v=1785258173"},{"product_id":"vybond-555-metallic_3x120yd-metallic-film-tape-3in-x-120yd","title":"Vybond 555-METALLIC_3X120YD Metallic Film Tape 3in X 120YD","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 555-METALLIC_3X120YD is a metallic printed OPP film tape with an acrylic adhesive system, engineered for HVAC duct sealing, dryer vent connections, and reflective insulation patching. The tape measures 3 inches wide and runs 120 yards per roll at 3.1 mil thickness. It carries a UL 181B-FX listing, making it code-compliant for flexible duct sealing applications. The acrylic adhesive is solvent-free and low in VOC content, which supports LEED compliance for both EA Credit 1 and EQ Credit 4.1. HVAC technicians and insulation contractors are the primary installers. The hand-tearable backing speeds up fieldwork without requiring a dispenser gun on every job.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC installations where a UL 181B-FX listed product is required by code. Typical applications include sealing flexible and rigid duct connections, patching reflective bubble insulation materials, and securing dryer vent connections. The metallic finish with high-visibility print allows inspectors to quickly identify taped joints during inspection. The mold- and moisture-resistant construction makes it appropriate for installations in unconditioned spaces, crawlspaces, and attics where humidity exposure is common.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL 181B-FX listed for use on flexible duct systems per code requirements\u003c\/li\u003e\n  \u003cli\u003eSolvent-free acrylic adhesive with low VOC content supports LEED EQ Credit 4.1 compliance\u003c\/li\u003e\n  \u003cli\u003eRated for service from -40 degrees F to 212 degrees F for use across a wide installation range\u003c\/li\u003e\n  \u003cli\u003eHand-tearable OPP film backing eliminates the need for a tape dispenser on the job\u003c\/li\u003e\n  \u003cli\u003eHigh-visibility metallic finish with contrasting print for straightforward field inspection\u003c\/li\u003e\n  \u003cli\u003eMold and moisture resistant construction for unconditioned space installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on flexible duct connections, dryer vent connections, and reflective or bubble insulation materials in residential and commercial HVAC applications where UL 181B-FX listed tape is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or insulation contractor in accordance with local mechanical codes and SMACNA guidelines. Shut down the HVAC system before accessing duct connections or vent terminations. Surfaces should be clean, dry, and free of dust or grease before applying tape to ensure full adhesive contact. Follow local Authority Having Jurisdiction requirements for duct sealing materials and listed product usage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Film Tape, 1-Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Metallic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 120 yards per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3.1 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Printed OPP Film\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: -40 to 212 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Standards\u003c\/strong\u003e: UL 181B-FX, PSTC-101, LEED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 555-METALLIC_3X120YD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51284099563826,"sku":"555-METALLIC_3X120YD","price":37.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309277812.jpg?v=1785258445"},{"product_id":"vybond-330x-extreme-weather-foil-tape","title":"Vybond 330X extreme weather foil tape","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 330X is an extreme weather foil tape featuring a special adhesive system designed for aggressive adhesion. It utilizes a plain dead soft aluminum foil backing that is extremely conformable, ensuring high adhesion and quick stick. This tape is suitable for applications with an operating temperature range from -35 °F to 260 °F, making it ideal for various demanding environments.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eSpecial adhesive system with aggressive adhesion even at -35 °F\u003c\/li\u003e\n  \u003cli\u003eMax operating temperature up to 260°F\u003c\/li\u003e\n  \u003cli\u003ePlain dead soft aluminum foil backing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Highlights\u003c\/h4\u003e\n\u003cp\u003eExtreme weather foil tape with aggressive adhesion, conformable aluminum backing, and wide operating temperature range.\u003c\/p\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 330X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Technology\u003c\/strong\u003e: Solvent Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape Thickness with Liner\u003c\/strong\u003e: 3.5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -35 to 260 °F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShelf Life\u003c\/strong\u003e: 1095\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51306707484978,"sku":"330X","price":37.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309547980.webp?v=1785248015"},{"product_id":"vybond-243b2-black-duct-tape-2-in-10-mil-60-yd-roll","title":"Vybond 243B2 Black Duct Tape 2 in 10 Mil 60 Yd Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 243B2 is a heavy-duty, cloth-backed duct tape built for demanding sealing, holding, bundling, and repair work in trade and industrial environments. It features a PE-coated cloth backing with a rubber-based adhesive that delivers approximately 50 oz\/in of adhesion to steel. Total tape thickness is 10 mils. The 2-inch-wide, 60-yard roll provides extended coverage per unit and conforms well to irregular surfaces, making it practical for HVAC ductwork, insulation wraps, containment tasks, and general jobsite repairs. Operating temperature range runs from approximately 40 degrees F to 200 degrees F, supporting use in a wide variety of field conditions.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and commercial HVAC applications involving ductwork sealing, insulation securing, and surface bundling. It also performs well in general mechanical and electrical jobsite tasks where a conformable, high-adhesion cloth tape is needed. The 60-yard roll length reduces change-outs during extended runs, and the black finish is appropriate for applications where color coding or concealment matters. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePE-coated cloth backing for conformability and tear resistance\u003c\/li\u003e\n  \u003cli\u003eRubber-based adhesive with approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003e10-mil total thickness for heavy-duty durability\u003c\/li\u003e\n  \u003cli\u003e2-inch width and 60-yard roll for extended coverage\u003c\/li\u003e\n  \u003cli\u003eOperating range of approximately 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003eBlack finish suitable for color-coded or low-visibility applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose, heavy-duty cloth duct tape for use on HVAC ductwork, insulation, bundling, and jobsite repair tasks across residential and commercial applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eClean and dry all surfaces before applying to ensure full adhesive contact. HVAC technicians and sheet metal workers are the typical installers for ductwork applications. For insulation or containment tasks, ensure the substrate is free of dust, oil, and moisture. Consult applicable mechanical codes when using tape as part of a duct sealing system to confirm suitability for the specific installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: Approximately 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 243B2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51342722531634,"sku":"243B2","price":26.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552690.jpg?v=1784906265"},{"product_id":"vybond-330x4-extreme-weather-foil-tape-4-in-3-5-mil-50-yd","title":"Vybond 330X4 Extreme Weather Foil Tape 4 in 3.5 Mil 50 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 330X4 is a wide-format aluminum foil tape engineered for demanding HVAC sealing and insulation work where a narrow tape will not provide sufficient seam coverage. The tape measures 4 inches wide and 50 yards long per roll, with a total thickness of 3.5 mil. A high-performance acrylic adhesive delivers adhesion near 60 oz per inch to steel and maintains a reliable bond across an operating temperature range of -40 degrees F to 350 degrees F. HVAC technicians and insulation installers reach for this tape when sealing wide duct joints, rigid board insulation seams, and flexible duct connections in both new construction and retrofit work.\u003c\/p\u003e\u003cp\u003eThis tape is suited for residential and light commercial HVAC installations where extreme temperature cycling, cold-weather application, or high-heat environments would cause standard foil tapes to fail or delaminate. The 4-inch width allows a single pass to cover wide seams on duct board, sheet metal ductwork, and wrapped insulation without overlapping multiple strips. One roll is included per unit. It is a common choice for attic and crawl space ductwork where temperature swings are severe and long-term adhesion is critical.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4-inch width covers wide duct joints and insulation seams in a single pass\u003c\/li\u003e\n\u003cli\u003e3.5 mil total thickness for durability and resistance to tearing during application\u003c\/li\u003e\n\u003cli\u003eHigh-performance acrylic adhesive with adhesion near 60 oz per inch to steel\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -40 degrees F to 350 degrees F for extreme-condition installs\u003c\/li\u003e\n\u003cli\u003e50-yard roll length reduces mid-job roll changes on large sealing runs\u003c\/li\u003e\n\u003cli\u003eAluminum foil backing provides a vapor barrier and reflective surface at seams\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement foil tape for use on residential and commercial HVAC ductwork, rigid and flexible duct insulation seams, and sheet metal applications requiring wide-format sealing coverage.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by HVAC technicians and insulation contractors. De-energize the air handling system and allow ductwork to reach ambient temperature before applying tape, as adhesion is reduced on surfaces that are very cold or wet. Clean and dry the seam surface before application to ensure full adhesive contact. Follow local mechanical codes, including SMACNA standards, for duct sealing requirements in your jurisdiction.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 50 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3.5 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 60 oz per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -40 degrees F to 350 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Aluminum foil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 330X4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51342952759602,"sku":"330X4","price":60.66,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552765.jpg?v=1784910643"},{"product_id":"vybond-n365m2-metallized-duct-tape-11-mil-2-inch-55-m-roll","title":"Vybond N365M2 Metallized Duct Tape 11 Mil 2 Inch 55 M Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND N365M2 is a professional-grade metallized duct tape engineered for high-demand sealing, bundling, and repair work in HVAC and mechanical service applications. It features a reinforced cloth backing with a metallized finish and a rubber-based adhesive that delivers approximately 60 oz\/in of adhesion to steel. Total tape thickness is 11 mils, giving it solid resistance to tearing and puncture during installation and in-service use. The 2-inch width and 55-meter roll length make it practical for extended service runs without frequent roll changes. Licensed HVAC technicians and mechanical contractors will find it well suited for duct sealing tasks where a durable, metallic-appearance tape is specified or preferred.\u003c\/p\u003e\u003cp\u003eThis tape is designed for use in residential and light commercial HVAC service and maintenance. It performs in sealing sheet metal duct joints, bundling insulation, patching minor duct damage, and general mechanical repairs where a reinforced, metallized tape provides both function and a finished appearance. The operating temperature range of approximately 40 degrees F to 200 degrees F suits it for typical forced-air duct system environments. One roll is included per unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRubber-based adhesive with approximately 60 oz\/in adhesion to steel for strong, lasting bonds\u003c\/li\u003e\n\u003cli\u003e11 mil total thickness provides tear and puncture resistance in field conditions\u003c\/li\u003e\n\u003cli\u003eMetallized finish suits applications where a metallic appearance is preferred or specified\u003c\/li\u003e\n\u003cli\u003eReinforced cloth backing adds dimensional stability during application\u003c\/li\u003e\n\u003cli\u003e2-inch width and 55-meter roll length reduce roll changes on extended jobs\u003c\/li\u003e\n\u003cli\u003eRated for approximately 40 degrees F to 200 degrees F operating temperature range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use as a general-purpose metallized duct tape in HVAC sealing, bundling, and repair applications on sheet metal duct systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eHVAC technicians and mechanical contractors typically apply this tape. Surfaces should be clean, dry, and free of dust, oil, and loose material before application to achieve full adhesion. Apply firm, even pressure across the tape width when bonding to duct surfaces. Follow applicable SMACNA guidelines and local mechanical codes for duct sealing methods and tape specifications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 11 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 55 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 60 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: approximately 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Reinforced cloth with metallized finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: N365M2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51343123906866,"sku":"N365M2","price":33.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552711.jpg?v=1784914195"},{"product_id":"vybond-357b2-cloth-duct-tape-black-2-in-10-mil-60-yd","title":"Vybond 357B2 Cloth Duct Tape Black 2 in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 357B2 is a premium-grade, cloth-backed duct tape designed for sealing, holding, bundling, and repair tasks across HVAC, insulation, and general service applications. It features a polyethylene-coated cloth backing paired with a rubber-based adhesive that delivers approximately 50 oz\/in of adhesion to steel. Total tape thickness is 10 mils, giving it the rigidity and conformability needed for wrapping ductwork, securing insulation blankets, and temporary repairs. The tape operates reliably from 40 degrees F to 200 degrees F, making it suitable for a wide range of mechanical and building service environments. Each roll is 2 inches wide and 60 yards long.\u003c\/p\u003e\u003cp\u003eThis tape is well suited for residential and light commercial HVAC work where a durable, hand-tearable cloth tape is preferred over foil or film alternatives. Technicians and installers reach for this format when wrapping flex duct connections, patching insulation facings, bundling wire harnesses, and handling general shop or jobsite repairs. The black finish blends with dark duct liner and insulation jacketing. The 60-yard roll length reduces mid-job roll changes on larger installations or multi-unit service routes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePE-coated cloth backing provides tear resistance and conformability around irregular shapes\u003c\/li\u003e\n\u003cli\u003eRubber-based adhesive bonds to steel, insulation, plastic, and most common duct surfaces\u003c\/li\u003e\n\u003cli\u003eApproximately 50 oz\/in adhesion to steel for a firm, durable hold\u003c\/li\u003e\n\u003cli\u003e10 mil total thickness balances flexibility with structural integrity\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e2-inch width and 60-yard length for efficient, continuous coverage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose cloth duct tape for use on HVAC ductwork, insulation jacketing, and general building service repair applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eApply to clean, dry surfaces for best adhesion — remove dust, oil, and moisture before taping. No tools are required for hand tearing, though a tape dispenser improves cut consistency on long runs. Do not use this tape as a substitute for listed UL 181 closure systems on pressure-sensitive or heat-activated duct sealing applications where code requires rated tape. Confirm local mechanical code requirements before using general-purpose cloth tape on sealed HVAC duct systems.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 357B2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51343222079794,"sku":"357B2","price":46.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552713.jpg?v=1784915617"},{"product_id":"vybond-324a2-cold-weather-foil-tape-3-mil-2-in-60-yd","title":"Vybond 324A2 Cold Weather Foil Tape 3 Mil 2 in 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 324A2 is an aluminum foil tape engineered for reliable adhesion in cold-weather conditions where standard foil tapes commonly fail. It uses an acrylic adhesive formulated to bond at temperatures as low as -40 degrees F, making it well-suited for duct sealing jobs that fall outside the performance window of conventional HVAC tapes. The tape measures 2 inches wide, runs 60 yards per roll, and carries a total thickness of approximately 3 mil. Published adhesion strength is approximately 45 oz\/in to steel. HVAC technicians and insulation contractors reach for this tape when ambient conditions on the job site push below the threshold of standard acrylic or rubber-based foil tapes.\u003c\/p\u003e\n\u003cp\u003eThis tape is used in residential and light-commercial HVAC applications for sealing duct seams, foil-faced insulation joints, and vapor barriers. It performs across a wide operating temperature range of approximately -40 degrees F to 300 degrees F, making it appropriate for both cold-climate installations and high-heat duct environments. One 60-yard roll is included per unit. Typical install scenarios include new duct fabrication in cold weather, wintertime service calls on existing ductwork, and insulation facing repairs where low ambient temperatures are a factor.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic adhesive formulated for cold-weather bonding down to approximately -40 degrees F\u003c\/li\u003e\n  \u003cli\u003eApproximately 3 mil total thickness for durability on duct seams and insulation joints\u003c\/li\u003e\n  \u003cli\u003eApproximately 45 oz\/in adhesion strength to steel\u003c\/li\u003e\n  \u003cli\u003eWide operating range of approximately -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e2-inch width suits standard duct seam and vapor barrier sealing work\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces mid-job roll changes on larger projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement foil tape for sealing duct seams, foil-faced insulation joints, and vapor barriers in residential and light-commercial HVAC systems where low-temperature adhesion is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eLicensed HVAC technicians and insulation contractors typically install foil tape as part of duct fabrication or repair work performed under applicable mechanical codes. Before applying, ensure the substrate surface is clean, dry, and free of dust, oil, or loose facing material to achieve full adhesive contact. Apply firm hand pressure or a roller across the full tape width to activate the adhesive bond. Do not apply over wet surfaces or active condensation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: approximately 3 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 45 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: approximately -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Aluminum foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 324A2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51343508439346,"sku":"324A2","price":50.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552714.jpg?v=1784917382"},{"product_id":"vybond-557b2-ul181b-fx-cloth-duct-tape-black-2-in-10-mil-60-yd","title":"Vybond 557B2 UL181B-FX Cloth Duct Tape Black 2 in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 557B2 is a UL181B-FX listed cloth-backed duct tape designed for code-compliant sealing of HVAC flex duct systems. It features a polyethylene-coated cloth backing paired with a rubber-based adhesive that delivers approximately 50 ounces per inch of adhesion to steel. The tape is 2 inches wide, 10 mils thick, and supplied in a 60-yard roll. Its operating temperature range of 40 degrees F to 200 degrees F covers typical duct installation environments. This product is intended for HVAC technicians and sheet metal contractors who require a UL-listed cloth tape format for flex duct closure and sealing work.\u003c\/p\u003e\n\u003cp\u003eThe 557B2 is suited for residential and light commercial HVAC duct applications where UL181B-FX compliance is required by local mechanical codes. It is used to seal longitudinal seams and connections on Class 1 flexible air ducts and flexible air connectors. The cloth construction and rubber adhesive provide conformability on irregular duct surfaces, making it a practical choice for service techs working in tight attic or crawl space installations where a reliable cloth tape format is preferred over mastic or foil alternatives.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for code-compliant flex duct sealing\u003c\/li\u003e\n  \u003cli\u003eApproximately 50 oz\/in adhesion to steel for dependable bond strength\u003c\/li\u003e\n  \u003cli\u003ePE-coated cloth backing provides conformability on irregular duct surfaces\u003c\/li\u003e\n  \u003cli\u003eRubber-based adhesive performs across a 40 degrees F to 200 degrees F operating range\u003c\/li\u003e\n  \u003cli\u003e10 mil total thickness for durability in duct sealing applications\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces mid-job roll changes on larger installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a UL181B-FX compliant closure tape for Class 1 flexible air ducts and flexible air connectors in residential and light commercial HVAC duct systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or sheet metal contractor in accordance with local mechanical codes and SMACNA duct construction standards. Shut down the air handling system before sealing duct connections. Surfaces should be clean and dry before tape application to ensure full adhesive contact. Consult the applicable mechanical code for required overlap and closure requirements when using UL181B-FX listed tape on flex duct connections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 557B2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51343535243570,"sku":"557B2","price":40.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552705.jpg?v=1784917606"},{"product_id":"vybond-555s2-ul181b-fx-metallic-duct-seal-tape-2in-17mil-60yd","title":"Vybond 555S2 UL181B-FX Metallic Duct Seal Tape 2in 17mil 60yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 555S2 is a UL181B-FX listed metallic duct seal tape engineered for sealing flexible duct systems in residential and light commercial HVAC applications. It features a metallic foil backing combined with a high-tack mastic adhesive layer that forms a durable, long-term air and vapor seal at duct joints, collars, and transitions. The tape measures 17 mil total thickness, delivers approximately 60 ounces per inch of adhesion to steel, and handles service temperatures from -20 degrees F to 260 degrees F. HVAC technicians use this tape as a code-compliant solution wherever UL181B-FX listed closure systems are required on flex duct installations.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for sealing flexible duct joints, end connections, and transition fittings in forced-air heating and cooling systems. The UL181B-FX listing makes it acceptable under mechanical codes that require listed closure systems on Class 1 flexible air ducts and air connectors. It is appropriate for residential retrofits and new construction installs where a permanent, pressure-sensitive metallic tape closure is specified. Each unit includes one 60-yard roll, providing substantial coverage for a full system installation or service run.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for use on flexible duct systems requiring a code-compliant closure\u003c\/li\u003e\n  \u003cli\u003e17 mil total tape thickness for robust, tear-resistant handling during installation\u003c\/li\u003e\n  \u003cli\u003eHigh-tack mastic adhesive with approximately 60 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003eWide service temperature range: -20 degrees F to 260 degrees F\u003c\/li\u003e\n  \u003cli\u003eMetallic foil backing forms a durable air and vapor barrier at sealed joints\u003c\/li\u003e\n  \u003cli\u003e60-yard roll per unit provides generous coverage per job\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a UL181B-FX listed closure for Class 1 flexible air ducts and air connectors in residential and light commercial forced-air HVAC duct systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician in accordance with applicable mechanical codes, including SMACNA guidelines and local authority having jurisdiction requirements. Power down the air handling system before accessing duct connections. Surfaces must be clean, dry, and free of dust or grease for the adhesive to bond correctly. Do not stretch the tape during application, as distortion can reduce adhesion and compromise the seal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Metallic foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 17 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 60 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: -20 degrees F to 260 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 555S2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344095445298,"sku":"555S2","price":33.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552693.jpg?v=1784921750"},{"product_id":"vybond-36717a2-foilmastic-ul181b-fx-duct-sealant-tape","title":"Vybond 36717A2 Foilmastic UL181B-FX Duct Sealant Tape","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 36717A2 is a mastic-coated aluminum foil sealant tape listed to UL181B-FX for use on HVAC duct systems. The tape features a high-tack acrylic adhesive that bonds to rigid and flexible duct surfaces to form an airtight, moisture-resistant seal. At 17 mil total thickness, it delivers durable performance across a wide operating temperature range of -20 degrees F to 260 degrees F. Adhesion to steel is rated near 60 oz\/in. Each roll is 2 inches wide and 60 yards long. Licensed HVAC technicians and sheet metal mechanics install this tape to meet code-compliant duct sealing requirements on commercial and residential jobs.\u003c\/p\u003e\n\u003cp\u003eThis tape is used on rigid fiberglass duct board, rigid sheet metal ductwork, and flexible duct connections where a UL181B-FX listed sealant tape is required by mechanical code. It is well suited for sealing longitudinal seams, transverse joints, and duct-to-fitting connections. The mastic-coated foil backing conforms to irregular surfaces and resists moisture intrusion, making it appropriate for both conditioned space and unconditioned space duct installations such as attics, crawlspaces, and mechanical rooms.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for code-compliant sealing of rigid and flexible duct systems\u003c\/li\u003e\n  \u003cli\u003e17 mil total thickness provides robust, puncture-resistant coverage over duct joints and seams\u003c\/li\u003e\n  \u003cli\u003eHigh-tack acrylic adhesive with approximately 60 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003eMastic-coated aluminum foil backing creates an airtight and moisture-resistant bond\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -20 degrees F to 260 degrees F suits a wide range of HVAC applications\u003c\/li\u003e\n  \u003cli\u003e2-inch width, 60-yard roll length for efficient coverage on large duct sealing projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a UL181B-FX listed sealant tape for use on rigid fiberglass duct board systems and flexible duct connections in residential and commercial HVAC installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed HVAC technician or sheet metal mechanic. Shut down the air handling system and depressurize the duct before applying tape to joints or seams. Surfaces should be clean, dry, and free of dust or grease for proper adhesion. Refer to local mechanical codes and the International Mechanical Code for duct sealing requirements specific to the system type and application.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUL Listing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 17 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 60 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -20 degrees F to 260 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Mastic-coated aluminum foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: High-tack acrylic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36717A2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344143417650,"sku":"36717A2","price":58.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552720.jpg?v=1784922417"},{"product_id":"vybond-357s2-premium-duct-tape-silver-2in-10-mil-60-yd","title":"Vybond 357S2 Premium Duct Tape Silver 2in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 357S2 is a premium grade, multi-purpose cloth-backed duct tape designed for demanding trade and maintenance applications. It features a polyethylene-coated cloth backing bonded with a natural rubber adhesive, delivering approximately 50 oz\/in of adhesion to steel. The tape measures 2 inches wide, runs 60 yards per roll, and has a total thickness of 10 mils. The service temperature range spans 40 degrees F to 200 degrees F, making it suitable for use across a wide range of field conditions. HVAC technicians, insulation contractors, and general maintenance professionals rely on this tape for consistent hold and conformability.\u003c\/p\u003e\u003cp\u003eThe VYBOND 357S2 is well suited for sealing flex duct connections, securing fiberglass batt and duct wrap insulation, bundling pipe and conduit, and handling general facility maintenance tasks. Its cloth backing resists tearing during hand-application, and the rubber adhesive conforms to irregular surfaces including sheet metal, rigid insulation board, and plastic vapor barriers. The 60-yard roll length reduces roll changes on large jobs, making it practical for commercial and residential HVAC service work alike.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNatural rubber adhesive provides approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n\u003cli\u003ePolyethylene-coated cloth backing for tear resistance and conformability\u003c\/li\u003e\n\u003cli\u003e10 mil total thickness for durability in HVAC and general maintenance use\u003c\/li\u003e\n\u003cli\u003eService temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e2-inch width and 60-yard roll length for efficient coverage on large jobs\u003c\/li\u003e\n\u003cli\u003eSuitable for duct sealing, insulation securing, and bundling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose cloth-backed duct tape suitable for use on HVAC ductwork, insulation, sheet metal, plastic, and common building materials encountered in residential and commercial maintenance work.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSurface preparation is critical for maximum adhesion — clean and dry all surfaces before application, removing dust, oil, and moisture. Hand-tear or cut with a utility knife for clean edges. For HVAC duct sealing applications, verify that tape products meet local mechanical code requirements, as some jurisdictions require listed duct tape or mastic in addition to cloth tape. Avoid applying below 40 degrees F, as adhesion performance may be reduced at lower temperatures.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 50 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: polyethylene-coated cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: natural rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 357S2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344145776946,"sku":"357S2","price":46.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552709.jpg?v=1784922379"},{"product_id":"vybond-n324a2-5-cold-weather-aluminum-foil-duct-tape-3-mil","title":"Vybond N324A2.5 Cold Weather Aluminum Foil Duct Tape 3 Mil","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND N324A2.5 is a cold-weather aluminum foil duct tape engineered for HVAC sealing applications where ambient temperatures make standard foil tapes unreliable. Built with an acrylic adhesive system, it maintains a strong bond at temperatures as low as -40 degrees F and holds through service conditions up to 300 degrees F. Total tape thickness is 3 mil, and adhesion to steel is approximately 45 oz\/in. Each roll measures 2.5 inches wide and 60 yards long. Licensed HVAC technicians and sheet metal contractors reach for this tape when sealing duct seams, insulation joints, and vapor barriers during cold-weather installation or in unheated spaces where adhesive failure is a common callback.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC ductwork where installations occur in cold ambient conditions — unfinished basements, unconditioned attics, crawl spaces, or exterior job sites during winter months. It performs on rigid fiberglass duct board, flex duct seams, metal duct joints, and vapor barrier overlaps. Because the acrylic adhesive activates and grips at low temperatures, it eliminates the wait-and-press-and-hope cycle that plagues standard pressure-sensitive foil tapes in cold environments. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic adhesive maintains bond at temperatures down to -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e3 mil total thickness provides durable, puncture-resistant backing\u003c\/li\u003e\n  \u003cli\u003eAdhesion to steel of approximately 45 oz\/in for secure seam sealing\u003c\/li\u003e\n  \u003cli\u003eService temperature range of -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e2.5-inch width and 60-yard length per roll for efficient coverage on duct runs\u003c\/li\u003e\n  \u003cli\u003eSuitable for duct seams, insulation joints, and vapor barrier applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement foil duct tape for cold-weather HVAC sealing applications on metal duct systems, rigid duct board, flexible duct, and vapor barriers where standard acrylic foil tapes fail to bond.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or sheet metal contractors in accordance with SMACNA ductwork standards. Before applying, clean the substrate surface of dust, oil, and moisture to maximize adhesion. Apply firm, even pressure across the full tape width after placement to ensure full contact between the adhesive and the substrate. Inspect seams after installation to confirm no lifting or gaps are present, particularly at corners and joints.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 45 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Aluminum Foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: N324A2.5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344174580018,"sku":"N324A2.5","price":50.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552774.jpg?v=1784922718"},{"product_id":"vybond-fsk3cw-fsk-insulation-seaming-tape-cold-weather-3-in","title":"Vybond FSK3CW Fsk Insulation Seaming Tape Cold Weather 3 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND FSK3CW is a reinforced foil-skrim-kraft insulation seaming tape engineered for cold-weather installation conditions. It uses an acrylic adhesive formulated to maintain tack at low temperatures, making it reliable for sealing FSK insulation seams and vapor barriers when ambient conditions drop well below freezing. The tape measures 3 inches wide, carries a total thickness of approximately 3 mil, and delivers adhesion of around 40 oz per inch to steel. Operating range spans -40 degrees F to 300 degrees F. HVAC insulation installers and sheet metal contractors working in cold-weather environments reach for this tape to achieve consistent, airtight seams without adhesive failure.\u003c\/p\u003e\n\u003cp\u003eThe FSK3CW is suited for residential and commercial HVAC insulation work where foil-faced duct wrap, duct board, or vapor barrier facing must be seamed and sealed. It is particularly well-suited for job sites where installation temperatures are low and standard pressure-sensitive tapes lose their tack prematurely. Each unit includes one 150-foot roll, making it practical for large-scale insulation seaming runs without mid-job reloading.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAcrylic adhesive maintains tack in cold-weather conditions down to -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e3 mil total tape thickness for durable, puncture-resistant seaming\u003c\/li\u003e\n  \u003cli\u003eAdhesion of approximately 40 oz per inch to steel surfaces\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range from -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e3-inch width covers FSK seams and vapor barrier laps in a single pass\u003c\/li\u003e\n  \u003cli\u003e150-foot roll length reduces changeovers on large insulation jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style seaming tape for foil-skrim-kraft faced duct wrap, duct board, and vapor barrier insulation systems used in residential and commercial HVAC applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or insulation contractors following SMACNA and local mechanical code requirements for duct insulation seaming. Ensure all FSK facing surfaces are clean, dry, and free of dust or oil before applying tape for maximum adhesion. Apply firm hand pressure across the full width of the tape after laying it onto the seam to ensure full contact with the acrylic adhesive. Do not apply to wet or frosted surfaces even though the adhesive is cold-weather rated.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 150 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 40 oz per inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: FSK3CW\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344210985266,"sku":"FSK3CW","price":32.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552703.jpg?v=1784923487"},{"product_id":"vybond-557s2-ul181b-fx-duct-tape-silver-2-in-10-mil-60-yd","title":"Vybond 557S2 UL181B-FX Duct Tape Silver 2 in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 557S2 is a UL181B-FX listed, cloth-backed duct tape engineered for code-compliant sealing of HVAC duct systems. Built on a PE-coated cloth backing with a rubber-based adhesive, it delivers approximately 50 oz\/in of adhesion to steel and a total thickness of 10 mils. The silver tape comes in a 60-yard roll and operates across a temperature range of 40 degrees F to 200 degrees F. HVAC technicians and sheet metal contractors reach for this tape where flex duct, rigid duct board, or duct liner connections require a listed, pressure-sensitive tape solution that meets current energy code requirements.\u003c\/p\u003e\n\u003cp\u003eThe 557S2 is intended for use in residential and light commercial HVAC duct systems where a UL181B-FX pressure-sensitive tape is specified. It is suited for sealing longitudinal seams and connections on flexible air ducts and duct board assemblies. The 2-inch width handles standard duct seam widths without trimming in most field applications. One roll is included per unit, making it straightforward to stock as a job-site consumable or van supply item.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for pressure-sensitive tape sealing of flexible and rigid HVAC duct systems\u003c\/li\u003e\n  \u003cli\u003eApproximately 50 oz\/in adhesion to steel for reliable seam holding\u003c\/li\u003e\n  \u003cli\u003e10-mil total thickness provides durability in tight duct chase and plenum environments\u003c\/li\u003e\n  \u003cli\u003ePE-coated cloth backing resists moisture and minor abrasion in duct applications\u003c\/li\u003e\n  \u003cli\u003eOperating range of 40 degrees F to 200 degrees F covers typical HVAC supply and return conditions\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces mid-job roll changes on larger duct runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a UL181B-FX listed pressure-sensitive replacement tape for sealing flexible air duct longitudinal seams and connections in residential and light commercial HVAC duct systems where a silver cloth-backed tape format is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eHVAC technicians and sheet metal mechanics install this tape per SMACNA and local mechanical code requirements. Before applying, ensure the duct surface is clean, dry, and free of dust or grease for proper adhesive bond. Apply with firm, even hand pressure or a roller to eliminate air pockets and edge lifting. Do not use on supply or return air plenums that exceed the rated operating temperature of 200 degrees F.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 557S2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344393240882,"sku":"557S2","price":40.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552710.jpg?v=1785183227"},{"product_id":"vybond-p557m2-ul181b-fx-cloth-duct-tape-silver-60-yd","title":"Vybond P557M2 UL181B-FX Cloth Duct Tape Silver 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND P557M2 is a UL181B-FX listed cloth-backed duct tape engineered for code-compliant HVAC duct sealing. It features a polyethylene-coated cloth backing with a rubber-based adhesive that delivers approximately 50 oz\/in of adhesion to steel. Total tape thickness is 10 mils, and the operating temperature range runs from 40 degrees F to 200 degrees F. Each roll is 2 inches wide and 60 yards long, providing a substantial run length for production installs. Licensed HVAC technicians and sheet metal contractors reach for this tape when a job calls for a traditional silver duct tape that meets current sealing standards.\u003c\/p\u003e\u003cp\u003eThis tape is used in residential and light commercial HVAC duct systems where closure materials must carry a UL181B-FX listing to satisfy mechanical code inspections. It is appropriate for sealing longitudinal seams and transverse joints on flexible duct and on factory-made air ducts and connectors that fall under UL181 requirements. The silver finish and standard 2-inch width make it compatible with typical hand-held tape dispensers used in the field. One roll is included per unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUL181B-FX listed for code-compliant HVAC duct sealing applications\u003c\/li\u003e\n\u003cli\u003eRubber-based adhesive provides approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n\u003cli\u003ePolyethylene-coated cloth backing for durability and conformability\u003c\/li\u003e\n\u003cli\u003e10 mil total thickness for robust seam coverage\u003c\/li\u003e\n\u003cli\u003eRated for continuous use from 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e60-yard roll length reduces mid-job roll changes on large duct runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on UL181-rated flexible ducts and factory-made rigid air ducts and connectors where a UL181B-FX closure system is required by the International Mechanical Code or local authority having jurisdiction.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician or sheet metal contractor familiar with IMC and local mechanical code closure requirements. Ensure all duct surfaces are clean, dry, and free of dust or grease before applying tape, as contamination significantly reduces adhesive bond strength. Apply firm, even hand pressure across the full tape width when sealing seams to eliminate air gaps. Do not use this tape on duct systems that operate outside the rated temperature range of 40 degrees F to 200 degrees F.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Polyethylene-coated cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P557M2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344583885106,"sku":"P557M2","price":40.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552708.jpg?v=1785184736"},{"product_id":"vybond-p251m2-metallized-duct-tape-10-mil-2-in-x-60-yd","title":"Vybond P251M2 Metallized Duct Tape 10 Mil 2 in X 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND P251M2 is a professional-grade metallized cloth duct tape engineered for sealing, bundling, and general repair work in HVAC and mechanical system applications. It features a reinforced cloth backing with a metallized surface finish and a rubber-based adhesive that delivers approximately 50 oz\/in of adhesion to steel. The total tape thickness is 10 mils, and each roll measures 2 inches wide by 60 yards long. The operating temperature range runs from 40 degrees F to 200 degrees F, making it suitable for ductwork environments where moderate heat resistance is required. Licensed HVAC technicians and mechanical contractors are the primary installers.\u003c\/p\u003e\u003cp\u003eThis tape is used across residential and light commercial HVAC installations where a clean, uniform metallic appearance is needed alongside reliable conformability. It bonds well to rigid and flexible ductwork, duct insulation jacketing, and foil-faced materials. The metallized finish gives installations a finished look consistent with professional sheet metal work. Common applications include sealing duct joints and seams, bundling insulation, patching minor surface tears, and securing vapor barrier overlaps in mechanical rooms and attic spaces.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRubber-based adhesive provides approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n\u003cli\u003e10 mil total thickness for durable, tear-resistant performance\u003c\/li\u003e\n\u003cli\u003eMetallized cloth backing offers a clean, uniform appearance on exposed ductwork\u003c\/li\u003e\n\u003cli\u003eConformable construction follows curved and irregular duct surfaces\u003c\/li\u003e\n\u003cli\u003eRated for use from 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003eEach unit includes one roll at 2 inches wide by 60 yards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose metallized cloth duct tape for use on HVAC ductwork, duct insulation jacketing, and foil-faced surfaces in residential and light commercial mechanical applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eHVAC technicians and sheet metal mechanics typically apply this tape as part of duct sealing and repair work. Surfaces should be clean, dry, and free of dust, grease, or loose insulation fibers before tape application to ensure full adhesive contact. Firm hand pressure or a roller tool should be used along the entire tape length to seat the adhesive. Follow applicable mechanical codes for duct sealing requirements, as tape-only sealing may not satisfy all code provisions without supplemental mastic in certain jurisdictions.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Metallized cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P251M2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344642834738,"sku":"P251M2","price":33.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552695.jpg?v=1785185997"},{"product_id":"vybond-330x3-aluminum-foil-hvac-tape-3-in-3-5-mil-50m","title":"Vybond 330X3 Aluminum Foil Hvac Tape 3 in 3.5 Mil 50m","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 330X3 is an aluminum foil HVAC tape engineered for extreme temperature and environmental conditions. It combines a durable foil backing with a high-performance acrylic adhesive to deliver long-term sealing reliability on duct systems, insulation joints, and related assemblies. Total thickness runs 3.5 mil, adhesion to steel is rated at approximately 60 oz\/in, and the temperature range spans -40 degrees F to 350 degrees F. The 3-inch width and 50-meter roll length support efficient coverage on large duct seams and insulation wrap applications. HVAC technicians and sheet metal contractors are the primary installers.\u003c\/p\u003e\u003cp\u003eThe 330X3 is suited for sealing longitudinal and transverse duct seams, insulation vapor barriers, and foil-faced board joints in both residential and light commercial HVAC systems. Its extended temperature range makes it appropriate for installations exposed to outdoor ambient swings, attic heat loads, or cold-climate conditions where standard duct tapes fail prematurely. One roll is included per unit, making it straightforward to stock or order by the roll for service calls and new-construction duct work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3.5 mil total thickness provides puncture resistance on irregular duct surfaces\u003c\/li\u003e\n\u003cli\u003eAcrylic adhesive rated to approximately 60 oz\/in adhesion to steel\u003c\/li\u003e\n\u003cli\u003eTemperature range of -40 degrees F to 350 degrees F suits extreme installation environments\u003c\/li\u003e\n\u003cli\u003e3-inch width covers wide duct seams and insulation joints in fewer passes\u003c\/li\u003e\n\u003cli\u003e50-meter roll length reduces roll changes on large jobs\u003c\/li\u003e\n\u003cli\u003eAluminum foil backing resists moisture, UV exposure, and vapor drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style foil tape for use on sheet metal ductwork, flexible duct collars, and foil-faced insulation assemblies in residential and commercial HVAC applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or sheet metal contractors following local mechanical codes and SMACNA duct construction standards. Power down the air handler or furnace before sealing active duct sections to prevent debris ingestion. Clean and dry all surfaces before applying the tape to ensure full adhesive contact. Do not apply over wet insulation, frost, or oily surfaces, as adhesion will be compromised.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3.5 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 50 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 60 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -40 degrees F to 350 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Aluminum foil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 330X3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344671441202,"sku":"330X3","price":37.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552701.jpg?v=1785186698"},{"product_id":"vybond-357w2-white-duct-tape-2-in-10-mil-60-yd-roll","title":"Vybond 357W2 White Duct Tape 2 in 10 Mil 60 Yd Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 357W2 is a premium-grade, cloth-backed duct tape designed for HVAC sealing, insulation attachment, and general mechanical service work where a clean white finish is required. Built on a PE-coated cloth backing with a rubber-based adhesive, it delivers approximately 50 ounces per inch of adhesion to steel. Total tape thickness is 10 mils. The 2-inch width and 60-yard roll length make it practical for both large duct sealing runs and smaller trim-out repairs. Licensed HVAC technicians and insulation contractors reach for this tape when appearance and holding strength need to be balanced in a single product.\u003c\/p\u003e\n\u003cp\u003eThe 357W2 is suited for residential and light commercial HVAC applications including supply and return duct sealing, fiberglass insulation jacketing, and general mechanical room repairs. Its white finish blends with insulation jacketing and sheet metal surfaces, making it a common choice for finished-space installs where exposed tape is visible. The 60-yard roll reduces mid-job roll changes on larger duct runs. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePE-coated cloth backing provides tear resistance and a clean, professional white appearance\u003c\/li\u003e\n  \u003cli\u003eRubber-based adhesive delivers approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003e10 mil total thickness for durability in demanding service environments\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of approximately 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e2-inch width suits standard duct sealing and insulation attachment tasks\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces change-outs on longer runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in residential and light commercial HVAC duct systems, insulation jacketing applications, and general mechanical service repairs where a cloth-backed adhesive tape with a white finish is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or insulation contractors. Surfaces should be clean, dry, and free of dust, oil, and loose material before tape is applied to ensure full adhesive contact. When used for duct sealing in jurisdictions that require mastic or UL 181-listed tape, confirm local code compliance before substituting this tape. Avoid exposing the tape to temperatures outside the rated range, as adhesive performance will degrade.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: Approximately 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 357W2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344714105138,"sku":"357W2","price":46.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552715.jpg?v=1785187749"},{"product_id":"vybond-3392-cold-weather-ul181-foil-tape-3-mil-60-yd-roll","title":"Vybond 3392 Cold Weather UL181 Foil Tape 3 Mil 60 Yd Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 3392 is a cold-weather aluminum foil tape listed to UL181 A and B-FX standards, designed for code-compliant sealing of HVAC duct systems. The tape features an acrylic adhesive formulated to bond reliably at low temperatures, with a total thickness of 3 mil and published adhesion of approximately 45 oz\/in to steel. The operating temperature range spans from -40 degrees F to 300 degrees F, making it suitable for use in unconditioned spaces, attics, crawlspaces, and exterior chase applications where standard foil tapes may fail to adhere. Each roll is 2.5 inches wide and 60 yards long. HVAC technicians and sheet metal contractors rely on this tape where cold ambient temperatures are a factor during installation or service.\u003c\/p\u003e\n\u003cp\u003eThis tape is applied to rigid fiberglass duct board, flexible duct assemblies, insulation seams, and vapor barrier joints in residential and light commercial HVAC systems. The UL181 A and B-FX listing satisfies most building and mechanical code requirements for duct sealing without mastic, including applications on Class 1 flexible air connectors. It is particularly well suited for installations performed in winter months or in climate zones with extended cold seasons where adhesive performance is a documented concern.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181 A and B-FX listed for code-compliant duct sealing on rigid and flexible duct systems\u003c\/li\u003e\n  \u003cli\u003eAcrylic adhesive engineered for reliable bonding in cold-weather installation conditions\u003c\/li\u003e\n  \u003cli\u003e3 mil total thickness provides durable, puncture-resistant coverage over seams and joints\u003c\/li\u003e\n  \u003cli\u003eAdhesion approximately 45 oz\/in to steel for secure, long-term hold\u003c\/li\u003e\n  \u003cli\u003eWide operating range of -40 degrees F to 300 degrees F suits year-round and extreme-environment use\u003c\/li\u003e\n  \u003cli\u003e2.5-inch width and 60-yard roll length reduce splice frequency on longer runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on UL181-listed rigid fiberglass duct board, Class 1 flexible air connectors, sheet metal duct joints, insulation lap seams, and vapor barrier overlaps in residential and light commercial HVAC ductwork applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or sheet metal contractor in accordance with local mechanical codes and SMACNA guidelines. Before applying, clean and dry all mating surfaces to remove dust, oil, and moisture, as contamination will reduce adhesion even with a cold-weather formula. Power down the air handling system before working on duct sections to prevent pressurization. Firm hand pressure or a seam roller should be used along the full tape length to ensure full contact and activate the adhesive bond.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 45 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Aluminum foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181 A and B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3392\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51344934666546,"sku":"3392","price":50.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552716.jpg?v=1785190968"},{"product_id":"vybond-p557m3-ul181b-fx-duct-tape-silver-3-in-10-mil-60-yd","title":"Vybond P557M3 UL181B-FX Duct Tape Silver 3 in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND P557M3 is a cloth-backed duct tape listed to UL181B-FX for code-compliant HVAC duct sealing. It is constructed with a polyethylene-coated cloth backing and a rubber-based adhesive that delivers approximately 50 oz\/in adhesion to steel. The tape measures 3 inches wide, runs 60 yards per roll, and has a total thickness of 10 mils. Its operating temperature range spans 40 degrees F to 200 degrees F, making it suitable for both installation and long-term in-service conditions. HVAC technicians and sheet metal contractors reach for this tape when sealing larger duct seams and joints where wider coverage reduces lap count and speeds up the job.\u003c\/p\u003e\n\u003cp\u003eThe P557M3 is designed for use on flexible and rigid duct systems in residential and light commercial HVAC installations. The 3-inch width is particularly well suited for sealing wide duct seams, longitudinal joints, and end connections where a narrower tape would require multiple passes. The UL181B-FX listing means it meets the code requirements typically called out in mechanical codes for pressure-sensitive tape used on Class 1 flexible air ducts and air connectors. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for code-compliant flexible duct sealing applications\u003c\/li\u003e\n  \u003cli\u003eRubber-based adhesive with approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003ePolyethylene-coated cloth backing for strength and conformability\u003c\/li\u003e\n  \u003cli\u003e3-inch width reduces passes needed on wide seams and joints\u003c\/li\u003e\n  \u003cli\u003e10-mil total thickness provides durable, puncture-resistant coverage\u003c\/li\u003e\n  \u003cli\u003eOperating range of 40 degrees F to 200 degrees F suits typical duct system conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on Class 1 flexible air ducts and air connectors where UL181B-FX pressure-sensitive tape is specified by mechanical code.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or sheet metal contractor in accordance with the applicable mechanical code and the duct manufacturer instructions. The duct system should be depressurized and the surface to be taped should be clean, dry, and free of dust or grease before applying the tape. Apply firm, even pressure across the full width of the tape to ensure full adhesive contact. Refer to local mechanical code and the UL181B-FX listing requirements for approved application methods and overlap minimums.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUL Listing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Polyethylene-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P557M3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51345294950706,"sku":"P557M3","price":56.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552718.jpg?v=1785196339"},{"product_id":"vybond-223s2-gray-cloth-duct-tape-10-mil-2-in-x-60-yd","title":"Vybond 223S2 Gray Cloth Duct Tape 10 Mil 2 in X 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 223S2 is a multi-purpose cloth-backed duct tape built for HVAC, insulation, and general construction applications. It uses a polyethylene-coated cloth backing paired with a natural rubber adhesive that delivers approximately 50 oz\/in of adhesion to steel. Total tape thickness is 10 mils, and the operating temperature range runs from 40 degrees F to 200 degrees F. The 2-inch width and 60-yard roll length provide efficient coverage on larger jobs. HVAC technicians, insulation installers, and general tradespeople reach for this tape when they need a conformable, reliable hold on irregular or flat surfaces.\u003c\/p\u003e\u003cp\u003eThis tape suits a wide range of jobsite tasks including HVAC duct sealing, insulation blanket holding, bundling of pipes or conduit, and general repair work. The conformable cloth backing allows it to wrap around curved or uneven surfaces without lifting at the edges. It maintains contact on sheet metal, rigid and flexible insulation, and other common substrate materials encountered in residential and light commercial mechanical rooms and utility spaces.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNatural rubber adhesive with approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n\u003cli\u003ePE-coated cloth backing conforms to irregular and curved surfaces\u003c\/li\u003e\n\u003cli\u003e10 mil total thickness for durable, tear-resistant performance\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e2-inch width and 60-yard roll length for efficient, large-area coverage\u003c\/li\u003e\n\u003cli\u003eSuitable for duct sealing, insulation holding, bundling, and repair tasks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose cloth duct tape for use on sheet metal ductwork, rigid and flexible insulation, and common construction substrates in HVAC, plumbing, and general mechanical applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSurface preparation is critical for adhesive performance — clean and dry all substrates before applying the tape to remove dust, oil, and moisture. Apply firm hand pressure across the full tape width to ensure complete contact, especially on curved or textured surfaces. This tape is intended for general mechanical and construction use; where pressure-sensitive tape is required for rated duct sealing, verify local code compliance with UL 181 or applicable SMACNA standards before use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Natural rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 223S2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51345681154354,"sku":"223S2","price":23.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552747.jpg?v=1785201241"},{"product_id":"vybond-555b2-ul181b-fx-duct-seal-tape-black-2-in-17-mil","title":"Vybond 555B2 UL181B-FX Duct Seal Tape Black 2 in 17 Mil","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 555B2 is a mastic-backed duct seal tape listed to UL181B-FX for sealing and repairing flexible duct systems. It combines a reinforced backing with a high-tack adhesive layer to create an airtight, moisture-resistant seal. The tape measures 17 mil total thickness, with published adhesion near 60 oz\/in to steel and an operating temperature range of -20 degrees F to 260 degrees F. Each roll is 2 inches wide and 60 yards long. HVAC technicians use this tape for code-compliant sealing of flex duct connections, collars, and seams in residential and light commercial duct systems.\u003c\/p\u003e\n\u003cp\u003eThis tape is designed for flexible duct applications where UL181B-FX listing is required by mechanical code. Typical install scenarios include sealing flex duct to metal collars, boots, and plenums, as well as repairing tears or seams in existing flex duct runs. The high-tack mastic adhesive layer bonds under a range of field conditions, and the reinforced backing resists tearing during application. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for code-compliant flexible duct sealing and repair\u003c\/li\u003e\n  \u003cli\u003e17 mil total thickness with reinforced backing for tear resistance\u003c\/li\u003e\n  \u003cli\u003eMastic adhesive layer with published adhesion near 60 oz\/in to steel\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -20 degrees F to 260 degrees F\u003c\/li\u003e\n  \u003cli\u003eMoisture-resistant construction for airtight duct seals\u003c\/li\u003e\n  \u003cli\u003e2 inch width, 60 yard roll length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a UL181B-FX listed tape for use on flexible duct systems, suitable for sealing flex duct connections, collars, and seams where code-compliant closure tape is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed HVAC technicians following applicable mechanical code requirements, including the International Mechanical Code (IMC) and SMACNA guidelines. Power down the air handling system before applying tape to duct connections. Surfaces should be clean, dry, and free of dust or debris before tape application to ensure full adhesive contact. Do not use this tape on rigid sheet metal duct systems where UL181A-listed products are required.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUL Listing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 17 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: 60 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -20 degrees F to 260 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Mastic-backed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 555B2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51345785356594,"sku":"555B2","price":33.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552691.jpg?v=1785202236"},{"product_id":"vybond-n510b2-black-gaffer-tape-11-mil-2-in-60-yd-roll","title":"Vybond N510B2 Black Gaffer Tape 11 Mil 2 in 60 Yd Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND N510B2 is a cloth-backed gaffer tape with a matte black finish, engineered for temporary securing, bundling, and surface protection in service and maintenance environments. The rubber-based adhesive delivers approximately 45 ounces per inch of adhesion to steel, holding firmly during use while allowing clean removal with minimal residue left behind. At 11 mils total thickness, the tape provides durable coverage without adding excessive bulk. Each roll measures 2 inches wide and 60 yards long. HVAC technicians, electricians, and staging crews install this tape where appearance matters and where residue-free removal is required after the job is complete.\u003c\/p\u003e\n\u003cp\u003eThis tape is well suited for HVAC service calls, equipment staging, cable management, and general maintenance tasks where a clean, professional look is needed on visible surfaces. The matte black finish eliminates glare and blends into dark surfaces and ductwork. The operating temperature range of approximately 50 degrees F to 200 degrees F covers typical residential and light commercial service environments. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCloth backing with matte black finish resists glare on visible surfaces\u003c\/li\u003e\n  \u003cli\u003eRubber-based adhesive provides approximately 45 oz per inch adhesion to steel\u003c\/li\u003e\n  \u003cli\u003e11 mil total thickness for durable, conformable coverage\u003c\/li\u003e\n  \u003cli\u003eRemoves cleanly with minimal residue — suitable for temporary applications\u003c\/li\u003e\n  \u003cli\u003eRated for use between approximately 50 degrees F and 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e2 inches wide by 60 yards per roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose gaffer tape for HVAC service, electrical maintenance, staging, and facilities work where temporary cloth-backed tape with clean removal properties is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eApply to clean, dry surfaces free of dust, oil, and loose material for best adhesion. This tape is intended for temporary use — do not use as a permanent fastening solution or as a substitute for listed duct sealing tape where code compliance is required. Remove the tape promptly after the application is complete to further reduce residue risk. No special tools are required for application or removal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 11 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 45 oz per inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Matte black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: Approximately 50 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: N510B2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51345954537778,"sku":"N510B2","price":65.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552721.jpg?v=1785205340"},{"product_id":"vybond-510b2-black-matte-gaffers-tape-11-mil-2-in-60-yd","title":"Vybond 510B2 Black Matte Gaffers Tape 11 Mil 2 in 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 510B2 is a cloth-backed, black matte gaffers tape designed for temporary securing, bundling, and surface protection in applications where clean removal and low reflectivity are required. It features a rubber-based adhesive that delivers approximately 45 oz\/in of adhesion to steel while leaving minimal residue on removal. The tape measures 2 inches wide, 11 mil total thickness, and comes in a 60-yard roll. Its matte black finish eliminates glare and surface sheen, making it well suited for environments where tape visibility or light reflection would be a problem. Licensed trades and maintenance professionals reach for this tape when a strong but temporary hold is the priority.\u003c\/p\u003e\u003cp\u003eThis tape is used in HVAC service, staging, and general maintenance environments where technicians need a reliable temporary hold without risking surface damage or adhesive transfer. The matte finish makes it appropriate for applications where appearance matters alongside function. It is suitable for temporarily bundling cables and hoses, securing insulation, masking surfaces during service work, and general jobsite utility tasks requiring a short-term, residue-free bond.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRubber-based adhesive provides approximately 45 oz\/in adhesion to steel\u003c\/li\u003e\n\u003cli\u003eMatte black finish minimizes surface reflectivity\u003c\/li\u003e\n\u003cli\u003eCloth backing allows controlled hand-tearing without tools\u003c\/li\u003e\n\u003cli\u003e11 mil total thickness delivers durability without bulk\u003c\/li\u003e\n\u003cli\u003eDesigned for clean removal with minimal adhesive residue\u003c\/li\u003e\n\u003cli\u003eRated for use in temperatures from 50 degrees F to 200 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose gaffers tape suitable for HVAC service, staging, and maintenance applications requiring temporary, low-reflectivity cloth-backed tape.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eApply to clean, dry surfaces for best adhesion and cleanest removal. Avoid leaving tape in place beyond the intended service period, as extended dwell time or elevated temperatures toward the upper operating limit may affect residue-free removal. No special tools are required; the cloth backing tears cleanly by hand. Follow applicable safety and worksite procedures when working in energized or pressurized environments.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 11 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 45 oz\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Matte Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 50 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 510B2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51346123850034,"sku":"510B2","price":65.45,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552717.jpg?v=1785208099"},{"product_id":"vybond-n300s2-cloth-duct-tape-2-inch-10-mil-55-m-roll","title":"Vybond N300S2 Cloth Duct Tape 2 Inch 10 Mil 55 M Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND N300S2 is a multi-purpose cloth-backed duct tape designed for HVAC duct sealing, insulation securing, bundling, and general repair applications. It features a PE-coated cloth backing bonded with a natural rubber adhesive that delivers approximately 50 oz\/in of adhesion to steel. Total tape thickness is 10 mils, and the service temperature range runs from 40 degrees F to 200 degrees F. Each roll is 2 inches wide and 55 meters long. Licensed HVAC technicians, insulation contractors, and facilities maintenance professionals rely on this tape for fast, dependable field repairs and duct assembly work.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC applications including sealing sheet metal duct joints, holding insulation wraps in place, bundling cables or hoses, and performing general repair tasks where a strong, conformable cloth-backed tape is needed. The 55-meter roll length reduces roll changes on larger jobs, making it practical for both service calls and new installations. It is sold as one roll per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePE-coated cloth backing for conformability and tear resistance\u003c\/li\u003e\n  \u003cli\u003eNatural rubber adhesive with approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003e10 mil total thickness for durability in demanding applications\u003c\/li\u003e\n  \u003cli\u003eService temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e2-inch width and 55-meter roll length for extended coverage\u003c\/li\u003e\n  \u003cli\u003eSuitable for HVAC duct sealing, insulation holding, bundling, and general repair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose cloth-backed duct tape suitable for use on sheet metal ducts, rigid and flexible insulation, and common repair substrates found in residential and light commercial HVAC systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSurface preparation is critical for maximum adhesion — clean and dry the substrate before application. HVAC technicians should ensure duct surfaces are free of dust, oil, and moisture prior to taping joints or seams. Power down air handling equipment before working inside duct systems. Follow applicable mechanical codes, including SMACNA standards, for duct sealing requirements in your jurisdiction.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Natural rubber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 55 meters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: N300S2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51346338382130,"sku":"N300S2","price":25.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552749.jpg?v=1785212313"},{"product_id":"vybond-p251m3-metallized-duct-tape-3-in-10-mil-60-yd","title":"Vybond P251M3 Metallized Duct Tape 3 in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND P251M3 is a professional-grade metallized duct tape engineered for HVAC duct sealing, insulation jacketing, and bundling applications. It features a cloth-backed construction with a metallized finish that reflects heat and provides a clean, finished appearance on exposed duct seams. The rubber-based adhesive delivers approximately 50 ounces per inch of adhesion to steel, and the tape measures 10 mils total thickness. At 3 inches wide and 60 yards per roll, it is sized for efficient coverage on larger duct joints and insulation surfaces, reducing the number of passes required to seal wide seams. HVAC technicians and sheet metal installers choose this tape where higher adhesion and extended service temperature performance are required.\u003c\/p\u003e\u003cp\u003eThis tape is suited for residential and light commercial HVAC installations where duct seams, insulation vapor barriers, and mechanical connections require a durable, long-lasting seal. The 3-inch width is particularly effective on rectangular duct flanges, large-diameter flex duct connections, and insulation wrap joints where narrower tapes require multiple overlapping strips. The metallized backing also provides UV resistance for duct systems in attics, crawlspaces, and mechanical rooms. One roll is included per unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMetallized cloth-backed construction with rubber-based adhesive system\u003c\/li\u003e\n\u003cli\u003eApproximately 50 oz per inch adhesion to steel for reliable duct seam bonding\u003c\/li\u003e\n\u003cli\u003e10 mil total thickness for durability and conformability on irregular surfaces\u003c\/li\u003e\n\u003cli\u003e3-inch width reduces application passes on wide duct joints and insulation surfaces\u003c\/li\u003e\n\u003cli\u003e60-yard roll length minimizes roll changes during large installs\u003c\/li\u003e\n\u003cli\u003eService temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on sheet metal ductwork, fibrous glass duct board, and flexible duct insulation jacketing in residential and light commercial HVAC systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eHVAC technicians and sheet metal installers should clean and dry all duct surfaces before application to ensure full adhesive contact. Power down air handling equipment before taping duct seams in pressurized systems. Apply firm pressure across the full tape width using a seam roller or gloved hand to eliminate air pockets and maximize bond strength. Follow local mechanical codes and SMACNA standards for duct sealing requirements.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 50 oz per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Metallized cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P251M3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51346885181746,"sku":"P251M3","price":46.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552752.jpg?v=1785222761"},{"product_id":"vybond-3393-ul181-foil-tape-3-inch-3-mil-60-yard-roll","title":"Vybond 3393 UL181 Foil Tape 3 Inch 3 Mil 60 Yard Roll","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 3393 is a UL181-listed aluminum foil tape engineered for HVAC duct sealing applications. Built on a 3-mil total thickness construction, it combines an aluminum foil backing with a pressure-sensitive acrylic adhesive that delivers adhesion of approximately 45 oz per inch to steel. The 3-inch width covers larger seams efficiently, reducing the number of passes needed on wide duct joints. The acrylic adhesive system is formulated for long-term bonding and holds across a service temperature range of -40 degrees F to 300 degrees F. Each unit includes one 60-yard roll. Licensed HVAC technicians and sheet metal contractors are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis tape is used in residential and light commercial HVAC installations where UL181 compliance is required for duct system sealing. It bonds to metal ductwork, spiral duct seams, and foil-faced duct insulation. The 3-inch width is well suited for longitudinal seams on rectangular ductwork and larger transverse joints where a narrower tape would require overlapping strips. Projects governed by energy codes or mechanical inspection requirements that mandate UL181-listed materials are a primary application.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181 listed for use on Class 1 flexible air ducts and air connectors\u003c\/li\u003e\n  \u003cli\u003e3-inch width covers wide seams in a single pass\u003c\/li\u003e\n  \u003cli\u003e3-mil total thickness provides durable, tear-resistant handling during installation\u003c\/li\u003e\n  \u003cli\u003eAcrylic adhesive delivers approximately 45 oz per inch adhesion to steel\u003c\/li\u003e\n  \u003cli\u003eService temperature range of -40 degrees F to 300 degrees F suits both heating and cooling duct systems\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces roll changes on large jobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on metal ductwork, spiral duct, and foil-faced duct insulation in HVAC systems where UL181-listed foil tape is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or sheet metal workers in accordance with SMACNA standards and local mechanical codes. Surfaces must be clean, dry, and free of dust or oil before tape application to ensure full adhesive contact. Apply firm, even pressure across the full tape width using a seam roller or gloved hand. Do not apply to surfaces outside the rated temperature range or to flex duct jacket materials not listed for use with foil tape.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 45 oz per inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService Temperature Range\u003c\/strong\u003e: -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Aluminum foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3393\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51346986664242,"sku":"3393","price":58.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552739.jpg?v=1785224190"},{"product_id":"vybond-398s3-industrial-duct-tape-silver-3-in-10-mil-60-yd","title":"Vybond 398S3 Industrial Duct Tape Silver 3 in 10 Mil 60 Yd","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 398S3 is a heavy-duty, cloth-backed duct tape built for demanding trade and jobsite applications. It features a polyethylene-coated cloth backing with a rubber-based adhesive that delivers approximately 50 oz\/in adhesion to steel. Total tape thickness is 10 mils, and the roll measures 3 inches wide by 60 yards long. The operating temperature range runs from 40 degrees F to 200 degrees F, making it suitable for environments that see moderate heat exposure. HVAC technicians, sheet metal workers, and general contractors reach for this tape when they need reliable holding power, conformability over irregular surfaces, and a durable bond that holds through normal service conditions.\u003c\/p\u003e\n\u003cp\u003eThe 398S3 is well suited for sealing and joining HVAC ductwork seams, wrapping and securing insulation, bundling materials on the jobsite, and handling general-purpose repair tasks where a standard-duty tape falls short. The 3-inch width provides broader seam coverage compared to narrower formats, reducing the number of passes needed on wide duct joints or insulation seams. One roll is included per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePolyethylene-coated cloth backing for conformability and tear resistance\u003c\/li\u003e\n  \u003cli\u003eRubber-based adhesive with approximately 50 oz\/in adhesion to steel\u003c\/li\u003e\n  \u003cli\u003e10 mil total thickness for heavy-duty sealing and holding applications\u003c\/li\u003e\n  \u003cli\u003e3-inch width increases seam coverage on ductwork and insulation\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces mid-job changeovers on large projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for general-purpose use on HVAC ductwork, insulation, and jobsite repair applications where a heavy-duty cloth-backed duct tape is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSurface preparation is critical for maximum adhesion — clean and dry all contact surfaces before applying tape. For HVAC ductwork applications, ensure the tape is used within its rated temperature range of 40 degrees F to 200 degrees F; do not use as a substitute for UL 181-listed duct sealing products where code requires rated materials. Apply firm, even pressure along the full length of the tape to ensure complete contact with the substrate.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 10 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: Approximately 50 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: PE-coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Rubber-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 398S3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51347133661490,"sku":"398S3","price":35.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552699.jpg?v=1785226120"},{"product_id":"vybond-322f2-5-foil-tape-3-mil-2-5-in-60-yd-hvac-duct","title":"Vybond 322F2.5 Foil Tape 3 Mil 2.5 in 60 Yd Hvac Duct","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 322F2.5 is an aluminum foil tape engineered for general-purpose HVAC sealing applications. Constructed with an acrylic adhesive backing, it delivers approximately 45 oz\/in adhesion to steel and a total tape thickness of 3 mil. The 2.5-inch width provides extra coverage across larger duct joints and insulation seams compared to standard 2-inch formats. Rated for continuous service from -40 degrees F to 300 degrees F, this tape handles the thermal cycling common in forced-air and ventilation systems. Each unit ships as a single 60-yard roll, giving technicians ample length for full job completion without mid-task breaks.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC installations where technicians need to seal insulation seams, duct joints, and vapor barriers. The 2.5-inch width increases overlap area on larger-diameter ducts and board insulation joints, reducing the number of passes required to achieve a secure, airtight seal. The aluminum foil facing holds its form under compression and resists moisture, making it appropriate for both supply and return duct assemblies as well as crawl-space and attic vapor barrier work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3 mil total thickness provides durability while conforming to irregular joint surfaces\u003c\/li\u003e\n  \u003cli\u003eAcrylic adhesive delivers approximately 45 oz\/in adhesion to steel substrates\u003c\/li\u003e\n  \u003cli\u003eOperating range of -40 degrees F to 300 degrees F suits HVAC thermal cycling demands\u003c\/li\u003e\n  \u003cli\u003e2.5-inch width increases seam coverage on larger duct joints and insulation panels\u003c\/li\u003e\n  \u003cli\u003e60-yard roll length reduces changeovers on extended installation runs\u003c\/li\u003e\n  \u003cli\u003eAluminum foil facing resists moisture and maintains structural integrity after application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose foil tape for use on sheet metal ductwork, fibrous glass duct board, flexible duct connections, insulation seams, and vapor barrier installations in residential and light commercial HVAC systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or qualified sheet metal workers. Power down air-handling equipment before taping duct joints to prevent tape displacement from airflow during application. Clean and dry all surfaces prior to applying tape to ensure full adhesive contact. Follow local mechanical codes and applicable SMACNA guidelines for duct sealing requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTape Width\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Thickness\u003c\/strong\u003e: 3 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 45 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -40 degrees F to 300 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFacing Material\u003c\/strong\u003e: Aluminum foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity per Unit\u003c\/strong\u003e: 1 roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 322F2.5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51347250250034,"sku":"322F2.5","price":32.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552698.jpg?v=1785227379"},{"product_id":"vybond-827white-underground-warning-tape-3in-4-mil-1000-ft","title":"Vybond 827WHITE Underground Warning Tape 3in 4 Mil 1000 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 827WHITE is a non-adhesive polyethylene film warning tape designed for burial above underground utilities and service lines. Made from 4 mil thick polyethylene film, it provides durable visual identification during future excavation work. The 3-inch width and 1000-foot roll length make it practical for continuous placement across long trench runs without frequent roll changes. It resists moisture, chemicals, and soil contact, maintaining legibility underground over time. Plumbers, electricians, gas fitters, and utility contractors install this tape during backfill operations to mark buried line locations for future dig crews.\u003c\/p\u003e\n\u003cp\u003eThis tape is used in residential and commercial trenching applications wherever buried utilities require surface or near-surface identification marking. It is laid directly in the trench above the pipe or conduit during backfill, creating a visual and tactile warning layer that alerts excavators to the presence of buried utilities below. It is appropriate for use above water lines, sewer lines, electrical conduit, gas lines, and communication lines where local code or best practice requires burial marking.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-adhesive polyethylene film construction resists moisture, chemicals, and soil contact\u003c\/li\u003e\n  \u003cli\u003e4 mil thickness provides durability during backfill and long-term underground service\u003c\/li\u003e\n  \u003cli\u003e3-inch width supports clear visual identification in the trench\u003c\/li\u003e\n  \u003cli\u003e1000-foot roll length reduces interruptions during long trench runs\u003c\/li\u003e\n  \u003cli\u003eWhite color for utility-type identification per burial marking conventions\u003c\/li\u003e\n  \u003cli\u003eOne roll per unit included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose underground warning tape for burial above water, sewer, electrical, gas, and communication utility lines in standard trenching and backfill applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eUnderground warning tape is typically installed by plumbers, electricians, gas fitters, or utility contractors during the backfill phase of trenching work. The tape is placed directly in the trench above the buried pipe or conduit, not in contact with the line itself, at a depth that allows detection before the utility is reached during future excavation. Local code requirements for burial depth and tape color conventions should be verified before installation. No mechanical tools are required for placement.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polyethylene film\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 4 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 1000 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive\u003c\/strong\u003e: Non-adhesive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: White\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity\u003c\/strong\u003e: 1 roll per unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 827WHITE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51347319947570,"sku":"827WHITE","price":29.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552696.jpg?v=1785228163"},{"product_id":"vybond-36717a3-foilmastic-sealant-tape-ul181b-fx-3-in","title":"Vybond 36717A3 Foilmastic Sealant Tape UL181B-FX 3 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 36717A3 is a wide-format aluminum foil sealant tape engineered for UL181B-FX compliant duct sealing. It combines a mastic-coated foil backing with a high-performance acrylic adhesive to form a durable, long-term air and vapor seal on flex duct, rigid duct board, and sheet metal connections. At 17 mil total thickness, the tape delivers substantial body and puncture resistance. The 3-inch width reduces lap count on larger seams and speeds application time on longitudinal joints and collars. Each roll provides 60 yards of coverage. This tape is installed by HVAC technicians and sheet metal workers as part of duct system sealing and commissioning work.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial duct sealing applications where UL181B-FX listing is required by local mechanical codes or inspection. It performs across a wide temperature range, making it appropriate for both conditioned and unconditioned spaces including attics, crawlspaces, and mechanical rooms. The 3-inch width is particularly well matched to trunk line seams, duct board fabrication seams, and boot-to-register connections where a narrow tape would require multiple passes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eUL181B-FX listed for compliant flex duct and duct board sealing applications\u003c\/li\u003e\n  \u003cli\u003eMastic-coated aluminum foil backing provides a conformable, air-tight seal\u003c\/li\u003e\n  \u003cli\u003eHigh-performance acrylic adhesive with adhesion approximately 60 oz per inch to steel\u003c\/li\u003e\n  \u003cli\u003e17 mil total thickness for durability and puncture resistance\u003c\/li\u003e\n  \u003cli\u003e3-inch width reduces application passes on wide seams and joints\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -20 degrees F to 260 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for UL181B-FX duct sealing applications on flexible duct systems, duct board assemblies, and related duct connections where a listed foil mastic tape is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eHVAC technicians and sheet metal workers install this tape as part of duct sealing procedures required by ACCA standards and local mechanical codes. Surfaces must be clean, dry, and free of dust, oil, or loose material before tape application to ensure full adhesive contact. Power down the air handling system before working inside duct enclosures. Do not apply over damaged or deteriorated duct board facing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 17 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion to Steel\u003c\/strong\u003e: approximately 60 oz per inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -20 degrees F to 260 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL181B-FX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking\u003c\/strong\u003e: Mastic-coated aluminum foil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Acrylic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36717A3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51347745964338,"sku":"36717A3","price":78.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310552741.jpg?v=1785236227"},{"product_id":"vybond-1086697-black-duct-tape-12-mil-1-88in-x-180ft","title":"Vybond 1086697 Black Duct Tape 12 Mil 1.88in X 180ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 1086697 is a 12 mil black duct tape built on a polyethylene-coated cloth backing with a rubber-based adhesive. At 12 mil total thickness, it delivers a tensile strength of 27 lb\/in and an adhesion strength of 93 oz\/in, making it a reliable choice for sealing, bundling, and patching applications in HVAC, mechanical, and general maintenance work. Each roll measures 1.88 inches wide by 180 feet long. The tape is manufactured in the USA and carries a 36-month shelf life when stored at stated conditions. It is intended for trade and professional use where a durable, heavy-body cloth tape is required.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC ductwork, mechanical room repairs, insulation jacketing, and general trade maintenance. The application temperature range of 30 degrees F to 90 degrees F allows for installation in cool environments, including unheated spaces during shoulder seasons. Once applied, the tape performs continuously from 40 degrees F to 200 degrees F, supporting use on duct surfaces, equipment housings, and vapor barrier seams. HVAC technicians, sheet metal workers, and maintenance professionals are the primary installers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e12 mil thickness with 27 lb\/in tensile strength for durable holding power\u003c\/li\u003e\n  \u003cli\u003e93 oz\/in adhesion strength on PE-coated cloth backing with rubber adhesive\u003c\/li\u003e\n  \u003cli\u003ePerformance temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003eApplication temperature down to 30 degrees F for cold-weather installs\u003c\/li\u003e\n  \u003cli\u003e1.88 inches wide by 180 feet per roll\u003c\/li\u003e\n  \u003cli\u003eMade in the USA with a 36-month shelf life from date of manufacture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose 12 mil cloth duct tape suitable for HVAC ductwork sealing, insulation jacketing, bundling, and mechanical maintenance applications where a rubber-adhesive cloth tape is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSurface must be clean, dry, and free of dust or grease before application. Apply when ambient and surface temperatures are between 30 degrees F and 90 degrees F for proper adhesive bond. Smooth the tape firmly from the center outward to eliminate air pockets and ensure full contact. Note that this tape is not UV resistant and should not be used in exposed outdoor applications where direct sunlight is expected.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 12 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 27 lb\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion Strength\u003c\/strong\u003e: 93 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Width\u003c\/strong\u003e: 1.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 180 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication Temperature\u003c\/strong\u003e: 30 degrees F to 90 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Temperature\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: PE Coated Cloth with Rubber Adhesive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV Resistant\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShelf Life\u003c\/strong\u003e: 36 months from date of manufacture at stated conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.042 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 6.585 inches x 1.89 inches x 6.585 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1086697\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51383181738290,"sku":"1086697","price":25.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312670714.webp?v=1784873371"},{"product_id":"vybond-1086696-premium-gray-duct-tape-12-mil-1-88-in-x-180-ft","title":"Vybond 1086696 Premium Gray Duct Tape 12 Mil 1.88 in X 180 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 1086696 is a 12 mil premium-grade cloth duct tape designed for general HVAC duct sealing, bundling, and repair work. Constructed with a PE coated cloth backing and rubber adhesive, it delivers an adhesion strength of 93 oz\/in and a tensile strength of 27 lb\/in. Each roll measures 1.88 inches wide by 180 feet long, making it a practical choice for sustained field use. The gray\/silver finish is standard for duct applications. Licensed HVAC technicians and sheet metal workers are the primary installers, though the tape is also used in plumbing and general mechanical work where a high-strength cloth tape is required.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC duct systems where a durable, conformable cloth tape is specified. It performs across a temperature range of 40 degrees F to 200 degrees F, with application possible down to 30 degrees F. This makes it usable in cold-weather installs or unheated mechanical spaces. It is not UV resistant, so it is intended for indoor or sheltered applications. The 12 mil thickness provides good conformability over irregular duct surfaces and seams without sacrificing tear strength.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e12 mil PE coated cloth backing with rubber adhesive for strong, flexible bonding\u003c\/li\u003e\n  \u003cli\u003eAdhesion strength of 93 oz\/in and tensile strength of 27 lb\/in\u003c\/li\u003e\n  \u003cli\u003ePerformance temperature range of 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003eApplication temperature range of 30 degrees F to 90 degrees F\u003c\/li\u003e\n  \u003cli\u003eRoll size of 1.88 inches x 180 feet per roll\u003c\/li\u003e\n  \u003cli\u003e36-month shelf life from date of manufacture under stated storage conditions\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose cloth duct tape for use on sheet metal, flexible duct, rigid ductboard, and other common HVAC duct substrates in indoor or sheltered mechanical environments.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eApply to clean, dry surfaces free of dust, oil, and moisture for best adhesion. Do not apply below 30 degrees F, as the rubber adhesive will not bond reliably at lower temperatures. This tape is not rated for UV exposure and should not be used on exterior or exposed outdoor surfaces. HVAC installations should follow applicable local codes and SMACNA guidelines for duct sealing methods.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 12 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Width\u003c\/strong\u003e: 1.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 180 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion Strength\u003c\/strong\u003e: 93 oz\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 27 lb\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication Temperature\u003c\/strong\u003e: 30 degrees F to 90 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePerformance Temperature\u003c\/strong\u003e: 40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: PE Coated Cloth with Rubber Adhesive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\/Gray\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV Resistant\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShelf Life\u003c\/strong\u003e: 36 months from date of manufacture at stated conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.042 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 6.585 inches x 1.89 inches x 6.585 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1086696\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51383655006514,"sku":"1086696","price":25.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312670716.webp?v=1784882457"},{"product_id":"vybond-1323566-flexfix-555-hi-tack-tape-72-mm-x-110-m","title":"Vybond 1323566 Flexfix 555 Hi-Tack Tape 72 mm x 110 m","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eVybond 1323566 is a Flexfix multi-purpose film tape with a 72 mm width and 110 m length that uses a long-life acrylic adhesive on a printed OPP film backing for HVAC sealing and duct closure. The tape is 3.1 mil thick, hand-tearable, low VOC, and rated for temperatures from -40 to 212 F. It meets UL 181B-FX and UL 723 standards for HVAC applications.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLong-life acrylic adhesive on printed OPP film backing; 72 mm x 110 m size; 3.1 mil thickness\u003c\/li\u003e\n  \u003cli\u003eTemperature rated -40 to 212 F; low VOC and no solvent odor; resistant to mold and mildew\u003c\/li\u003e\n  \u003cli\u003eMeets UL 181B-FX and UL 723; hand-tearable for contractor-grade closure on flexible non-metallic air duct\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Highlights\u003c\/h4\u003e\n\u003cp\u003eHVAC-grade Flexfix film tape for duct sealing, insulation repair, and dryer vent connections; UL 181B-FX and UL 723 compliant.\u003c\/p\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1323566\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer\u003c\/strong\u003e: Berry Plastics \/ Vybond\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1323566\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eItem Number\u003c\/strong\u003e: 44773\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 110 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 72 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3.1 mil (0.0031 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Long-life acrylic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Printed OPP film\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: -40 to 212 F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: HVAC sealing, sealing dryer vent connections, sealing and patching reflective and bubble insulation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Standards\u003c\/strong\u003e: UL 181B-FX, UL 723\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Multi-purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispenser Supplied\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVOC Content\u003c\/strong\u003e: Low\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTearability\u003c\/strong\u003e: Hand tearable\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51467358634290,"sku":"1323566","price":36.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/BerryGlobal_1323566_Image1.jpg?v=1784851501"},{"product_id":"vybond-1087653-fsk-tape-3-inches-x-60-yards","title":"Vybond 1087653 Fsk Tape 3 Inches X 60 Yards","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 1087653 is a diamond-pattern FSK (Foil\/Scrim\/Kraft) tape designed for sealing and securing insulation in HVAC and mechanical insulation applications. The three-layer construction combines an aluminum foil face, fiberglass scrim reinforcement, and a kraft paper backing to deliver a durable, vapor-retarding seal on duct wrap, duct board, and pipe insulation. At 3 inches wide and 60 yards per roll, a single roll covers substantial linear footage on a jobsite, making it a practical choice for both new construction and retrofit insulation work. HVAC technicians and insulation contractors are the primary installers.\u003c\/p\u003e\u003cp\u003eFSK tape is standard on residential and commercial HVAC ductwork insulation, particularly where a vapor barrier seal is required at seams, butt joints, and longitudinal laps of fiberglass duct wrap or rigid duct board. It is also used on mechanical pipe insulation in plenum and non-plenum environments. The diamond scrim pattern adds tensile strength across both axes of the tape, reducing the risk of tearing during application in tight or confined spaces.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThree-layer FSK construction: aluminum foil face, fiberglass scrim, kraft paper backing\u003c\/li\u003e\n\u003cli\u003eDiamond scrim pattern for balanced tensile strength in both directions\u003c\/li\u003e\n\u003cli\u003e3-inch width covers standard insulation seams and lap joints efficiently\u003c\/li\u003e\n\u003cli\u003e60-yard roll length reduces mid-job roll changes on large projects\u003c\/li\u003e\n\u003cli\u003eVapor-retarding face layer suitable for HVAC insulation sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard FSK seam tape for use with fiberglass duct wrap insulation, rigid duct board, and faced pipe insulation in residential and commercial HVAC mechanical systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eFSK tape is applied by HVAC technicians and insulation contractors as part of ductwork insulation sealing. Shut down the air handling system before sealing duct insulation seams to prevent dust contamination of adhesive surfaces. Surfaces should be clean, dry, and free of oil or dust before tape application to ensure full adhesion. Follow local mechanical codes and SMACNA guidelines for insulation seam sealing requirements.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 60 yards per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction\u003c\/strong\u003e: Foil \/ Scrim \/ Kraft (FSK)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePattern\u003c\/strong\u003e: Diamond scrim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1087653\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51620040507698,"sku":"1087653","price":28.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2ec97bb98734d3f33bc652d59239e9cf.webp?v=1787339491"},{"product_id":"vybond-1087629-foil-tape-3-in-x-60-yd-ul-723","title":"Vybond 1087629 Foil Tape 3 in X 60 Yd Ul 723","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VYBOND 1087629 is a general purpose non-printed aluminum foil tape designed for sealing, patching, and splicing applications in HVAC, duct work, and related mechanical systems. It ships in a 3-inch wide by 60-yard roll and weighs 2.5 pounds. The tape carries a UL 723 listing, confirming it meets recognized flammability and flame-spread standards required on many commercial and residential job sites. HVAC technicians and sheet metal installers typically reach for this tape when joining duct sections, sealing insulation seams, or making repairs on foil-faced materials where a clean, unlabeled surface is acceptable.\u003c\/p\u003e\u003cp\u003eThis foil tape is suited for general HVAC duct sealing and insulation work in both residential and light commercial settings. The non-printed face keeps the finished surface clean when aesthetics or re-labeling are a concern. The 60-yard roll length reduces mid-job roll changes on larger duct runs or insulation wraps. It is appropriate for use anywhere a UL 723 listed foil tape is specified by code or job requirements.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUL 723 listed for flame-spread compliance on HVAC and mechanical applications\u003c\/li\u003e\n\u003cli\u003e3-inch wide format covers duct seams and insulation joints efficiently\u003c\/li\u003e\n\u003cli\u003e60-yard roll reduces roll changes on longer runs\u003c\/li\u003e\n\u003cli\u003eNon-printed foil face for clean appearance and re-labeling flexibility\u003c\/li\u003e\n\u003cli\u003eGeneral purpose adhesive suitable for foil-faced insulation, bare duct, and similar substrates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general purpose foil tape suitable for sealing and patching foil-faced duct insulation, rigid duct board, and similar HVAC substrates where a UL 723 listed non-printed foil tape is required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed HVAC technicians or sheet metal workers. Surfaces should be clean, dry, and free of dust or grease before tape application to ensure proper adhesion. No tools beyond a tape measure and utility knife are normally required. Follow local mechanical codes and job specifications regarding required tape listings for duct sealing applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll Length\u003c\/strong\u003e: 60 yards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListing\u003c\/strong\u003e: UL 723\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint\u003c\/strong\u003e: Non-Printed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1087629\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51621202362674,"sku":"1087629","price":27.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/348e162ce9a85975935781c570d63aad.webp?v=1787351346"},{"product_id":"vybond-1086422-metallized-duct-tape-11-mil-48mm-x-55m","title":"Vybond 1086422 Metallized Duct Tape 11 Mil 48mm X 55m","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VYBOND 1086422 is a premium-grade metallized duct tape engineered for HVAC duct sealing, general repair, and contractor applications. It features a metallized polyethylene coated cloth backing paired with a natural rubber adhesive that bonds firmly to sheet metal, flex duct, and rigid ductboard surfaces. At 11 mil thick, the tape delivers the structural rigidity and tear resistance needed for professional installations. The metallic finish reflects heat and resists moisture, making it a practical choice in mechanical rooms, attic spaces, and plenum environments. It is sized at 48 millimeters wide by 55 meters long per roll and is sold 24 rolls per case.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and light commercial HVAC work, including duct sealing at seams and connections, HVAC contractor service calls, and general mechanical repair tasks. Its temperature rating of 40 to 200 degrees F covers the range typically encountered in forced-air duct systems, whether in unconditioned attic spaces during summer or cold-climate supply plenums. HVAC technicians and sheet metal contractors are the primary installers, though plumbing and general service trades use it for repair and wrap applications as well.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMetallized polyethylene coated cloth backing for durability and heat reflectivity\u003c\/li\u003e\n  \u003cli\u003eNatural rubber adhesive provides strong initial tack and long-term bond on metal and duct surfaces\u003c\/li\u003e\n  \u003cli\u003e11 mil thickness delivers tear resistance suited for professional use\u003c\/li\u003e\n  \u003cli\u003eTemperature rated from 40 to 200 degrees F for use in a wide range of HVAC environments\u003c\/li\u003e\n  \u003cli\u003e48 millimeters wide by 55 meters long per roll — standard contractor roll size\u003c\/li\u003e\n  \u003cli\u003eNo dispenser required; rolls are hand-tearable for jobsite efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in duct sealing and HVAC contractor applications, general repair, and compatible with sheet metal ductwork, flex duct, and rigid ductboard surfaces where a metallized tape is appropriate.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eHVAC technicians and sheet metal contractors apply this tape to clean, dry surfaces for best adhesion — remove dust, oil, and moisture before application. Follow local mechanical codes (such as IMC or SMACNA standards) for approved duct sealing methods, as tape-only sealing may not satisfy all code requirements without mastic in certain jurisdictions. Do not apply to surfaces that exceed the rated temperature range of 200 degrees F. Cut with a utility knife or tear by hand; no dispenser is included or required.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 48 millimeters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 55 meters per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 11 mil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Metallic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Natural rubber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBacking Material\u003c\/strong\u003e: Metallized polyethylene coated cloth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 40 to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Premium\/Professional\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispenser Supplied\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCase Quantity\u003c\/strong\u003e: 24 rolls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VYBOND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1086422\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VYBOND","offers":[{"title":"Default Title","offer_id":51672967053618,"sku":"1086422","price":24.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/BerryGlobal-Polyken_1086422_Image1-REP.jpg?v=1787975672"}],"url":"https:\/\/voomisupply.com\/collections\/vybond.oembed","provider":"Voomi Supply","version":"1.0","type":"link"}