{"title":"UNIVIEW","description":null,"products":[{"product_id":"honeywell-ipc3638se-adf28k-wl-i0-8mp-turret-network-camera","title":"Honeywell ipc3638se-adf28k-wl-i0 8MP Turret Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HONEYWELL ipc3638se-adf28k-wl-i0 is an 8-megapixel fixed warm light turret-style IP security camera built around a 1\/1.8-inch CMOS sensor. It delivers full-color, 24-hour surveillance using ColorHunter technology combined with an F1.0 super aperture, maintaining color imaging down to 0.0005 Lux without infrared. The camera supports 120 dB true wide dynamic range (WDR) for clear imaging in high-contrast lighting conditions. It encodes in Ultra 265, H.265, H.264, and MJPEG. This unit is installed by security integrators and low-voltage technicians in commercial and residential surveillance applications.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for indoor and outdoor fixed-mount surveillance where 24-hour full-color imaging is required without auxiliary IR illumination. The IK10 vandal-resistant housing and IP67 weatherproof rating make it appropriate for exterior mounting in exposed locations. It supports 9:16 corridor mode for hallways and stairwells. Smart intrusion prevention with target classification filters out false alarms triggered by environmental factors such as leaves, birds, and changing light, focusing detections on humans, motor vehicles, and non-motor vehicles. Intelligent people flow counting and crowd density monitoring expand its use in higher-density commercial environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e8 MP (3840 x 2160) resolution at up to 30 fps with 1\/1.8-inch CMOS sensor\u003c\/li\u003e\n  \u003cli\u003eColorHunter technology with F1.0 super aperture enables full-color imaging to 0.0005 Lux\u003c\/li\u003e\n  \u003cli\u003e120 dB true WDR for clear imaging in strong backlight or high-contrast scenes\u003c\/li\u003e\n  \u003cli\u003eSmart intrusion prevention with cross-line, intrusion, enter area, and leave area detection based on target classification\u003c\/li\u003e\n  \u003cli\u003eIK10 vandal-resistant and IP67-rated housing for exterior installation\u003c\/li\u003e\n  \u003cli\u003eMicroSD card support up to 512 GB for onboard edge storage\u003c\/li\u003e\n  \u003cli\u003eAlarm I\/O (1 in \/ 1 out) and audio I\/O (1 in \/ 1 out) for integrated system connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style fixed turret network camera for integration into IP-based video management systems supporting Ultra 265, H.265, H.264, or MJPEG video streams.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed low-voltage or security systems technicians. Power down or de-energize the network switch port before making connections. Follow local codes governing low-voltage wiring and camera mounting hardware. Do not exceed the MicroSD card capacity rating of 512 GB for onboard storage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 8 MP (3840 x 2160)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/1.8-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: Up to 30 fps (8 MP, intelligent off) \/ 25 fps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMin. Illumination\u003c\/strong\u003e: Color 0.0005 Lux (F1.0, AGC ON)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAperture\u003c\/strong\u003e: F1.0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e: Greater than 56 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000 s\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment Angle\u003c\/strong\u003e: Pan 0 degrees to 360 degrees, Tilt 0 degrees to 72 degrees, Rotate 0 degrees to 360 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOnboard Storage\u003c\/strong\u003e: MicroSD up to 512 GB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlarm I\/O\u003c\/strong\u003e: 1 in \/ 1 out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio I\/O\u003c\/strong\u003e: 1 in \/ 1 out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact Rating\u003c\/strong\u003e: IK10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HONEYWELL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3638se-adf28k-wl-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51267837722930,"sku":"IPC3638SE-ADF28K-WL-I0","price":273.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308912482.png?v=1785260347"},{"product_id":"honeywell-ipc354sb-adnf28k-i0-4mp-ir-dome-network-camera","title":"Honeywell ipc354sb-adnf28k-i0 4MP Ir Dome Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HONEYWELL ipc354sb-adnf28k-i0 is a 4MP LightHunter fixed IR dome network camera built for continuous indoor IP surveillance. It uses a 1\/2.7-inch CMOS sensor to deliver up to 2688 x 1520 resolution at 30 frames per second with Ultra 265, H.265, H.264, and MJPEG compression support. The 120 dB true wide dynamic range (WDR) engine produces clear images in high-contrast lighting conditions. Smart IR illumination reaches up to 30 meters, and the built-in microphone eliminates the need for external audio hardware. This camera is installed by security integrators, low-voltage technicians, and licensed alarm contractors on commercial and residential IP video systems.\u003c\/p\u003e\n\u003cp\u003eThis dome camera is designed for fixed indoor ceiling or wall installations where wide-angle or standard coverage is required. The 2.8 mm fixed lens delivers a 101.1-degree horizontal field of view, making it well suited for hallways, lobbies, retail floors, and open office spaces. Intelligent smart intrusion prevention functions — including cross-line detection, intrusion detection, enter-area detection, and leave-area detection — use target classification to reduce false alarms triggered by environmental movement such as leaves, birds, or lighting changes, and focus detection on humans, vehicles, and non-motor vehicles. People flow counting and crowd density monitoring are also supported natively.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4MP CMOS sensor with up to 2688 x 1520 resolution at 30 fps; triple-stream output supported\u003c\/li\u003e\n  \u003cli\u003e120 dB true WDR for clear imaging in scenes with strong backlighting or mixed lighting\u003c\/li\u003e\n  \u003cli\u003eSmart IR illumination up to 30 meters at 850 nm wavelength with auto\/manual light control\u003c\/li\u003e\n  \u003cli\u003eIntelligent intrusion prevention with human, vehicle, and non-motor vehicle target classification\u003c\/li\u003e\n  \u003cli\u003eBuilt-in microphone with two-way audio support; G.711U and G.711A audio compression\u003c\/li\u003e\n  \u003cli\u003eMicroSD edge storage up to 512 GB; supports ANR and NAS (NFS) network storage\u003c\/li\u003e\n  \u003cli\u003ePoE (IEEE 802.3af) and DC 12V power input; max power consumption 4.5 watts\u003c\/li\u003e\n  \u003cli\u003e9:16 corridor mode supported; pan 3 to 360 degrees, tilt 0 to 68 degrees adjustment range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with ONVIF Profile S, Profile G, Profile T, and Profile M platforms. Supports API and SDK integration. Client software includes EZStation and mobile app access. Web browser live view is supported on IE 10 and later, Chrome 45 and later, Firefox 52 and later, and Edge 79 and later with plug-in; plug-in-free live view is available on Chrome 57 and later, Firefox 58 and later, and Edge 16 and later.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed low-voltage technician or security systems integrator familiar with IP camera deployment and PoE network infrastructure. Before mounting or wiring, de-energize the PoE switch port or disconnect the DC 12V supply. Verify network switch compliance with IEEE 802.3af before connecting. Local codes and NEC Article 725 requirements for low-voltage wiring should be followed throughout the installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 4 MP (2688 x 1520)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: Up to 30 fps at 4 MP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMin. Illumination\u003c\/strong\u003e: 0.003 Lux color (F1.6, AGC ON); 0 Lux with IR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: 30 meters (98.4 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Wavelength\u003c\/strong\u003e: 850 nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFocal Length\u003c\/strong\u003e: 2.8 mm (101.1 degrees H) or 4.0 mm (83.5 degrees H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLens Type\u003c\/strong\u003e: Fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment Angle\u003c\/strong\u003e: Pan 3 to 360 degrees, Tilt 0 to 68 degrees, Rotate 3 to 360 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEdge Storage\u003c\/strong\u003e: MicroSD, up to 512 GB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio\u003c\/strong\u003e: Built-in microphone, 1 audio input, 1 audio output, two-way audio supported\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNetwork Interface\u003c\/strong\u003e: 1 x RJ45 10M\/100M Base-TX Ethernet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: DC 12V plus or minus 25%, PoE IEEE 802.3af\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Consumption\u003c\/strong\u003e: Max 4.5 watts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 4.3 inches diameter x 2.4 inches height\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.49 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Metal and plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e: -30 degrees F to 140 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHumidity\u003c\/strong\u003e: 95% RH or less, non-condensing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurge Protection\u003c\/strong\u003e: 4 KV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CE-EMC, FCC Part 15 B, CE LVD, CB, UL\/CUL, CE-RoHS, WEEE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eONVIF Compliance\u003c\/strong\u003e: Profile S, Profile G, Profile T, Profile M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HONEYWELL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc354sb-adnf28k-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51267838705970,"sku":"IPC354SB-ADNF28K-I0","price":215.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308910383.png?v=1785260320"},{"product_id":"uniview-ipc3k28se-adf28kmc-dl-i0-8mp-180-degree-dual-light-turret-camera","title":"Uniview IPC3K28SE-ADF28KMC-DL-I0 8MP 180 Degree Dual-Light Turret Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe Uniview IPC3K28SE-ADF28KMC-DL-I0 is an 8MP double-light binocular eyeball network camera designed for wide-area video surveillance. It uses dual 2.8 mm lenses with image splicing technology to provide a 180-degree horizontal field of view, allowing broad coverage from a single camera. The ColorHunter technology provides full-color imaging in low-light environments, while dual supplemental illumination combines infrared and warm light for visibility in dark conditions.\u003c\/p\u003e\n\u003cp\u003eThe camera supports 130 dB True WDR for maintaining image clarity in challenging lighting conditions and provides intelligent intrusion prevention with human, vehicle, and non-motor vehicle classification. It also supports people flow counting, crowd density monitoring, color retrieval, red and blue warning lights, two-way audio, and local MicroSD storage up to 512 GB. The camera supports both DC 12V power and IEEE 802.3af PoE and is rated IP67 for weather resistance and IK10 for impact protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8MP network camera with dual-lens binocular design\u003c\/li\u003e\n\u003cli\u003e180-degree horizontal field of view\u003c\/li\u003e\n\u003cli\u003eColorHunter technology for 24-hour full-color imaging\u003c\/li\u003e\n\u003cli\u003e130 dB True WDR for high-contrast lighting conditions\u003c\/li\u003e\n\u003cli\u003eDual infrared and warm-light illumination up to 30 m\u003c\/li\u003e\n\u003cli\u003eRed and blue warning light support\u003c\/li\u003e\n\u003cli\u003eSmart intrusion prevention with human, vehicle, and non-motor vehicle classification\u003c\/li\u003e\n\u003cli\u003ePeople flow counting and crowd density monitoring\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual microphones and speaker for two-way audio\u003c\/li\u003e\n\u003cli\u003eMicroSD card support up to 512 GB\u003c\/li\u003e\n\u003cli\u003ePoE and DC 12V power options\u003c\/li\u003e\n\u003cli\u003eIP67 weather protection and IK10 vandal resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\n\u003cp\u003eThe IPC3K28SE-ADF28KMC-DL-I0 is designed for surveillance applications where a wide horizontal viewing angle is required. Its dual-lens 180-degree panoramic coverage reduces blind areas while ColorHunter technology, dual supplemental lighting, and 130 dB WDR help maintain usable images across changing lighting conditions. Its intelligent detection features can distinguish people and vehicles to reduce false alarms from environmental movement such as leaves, birds, and lighting changes.\u003c\/p\u003e\n\u003ch3\u003eProduct Information\u003c\/h3\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: Uniview\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: IPC3K28SE-ADF28KMC-DL-I0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Network Camera\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Type\u003c\/strong\u003e: Eyeball\/Turret\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Prime III\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnology\u003c\/strong\u003e: ColorHunter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Resolution\u003c\/strong\u003e: 8MP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Stream Resolution\u003c\/strong\u003e: 4096 x 1860 at up to 20 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.5 in. CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e: Dual 2.8 mm Fixed Lens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIris\u003c\/strong\u003e: F1.0 Fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal Field of View\u003c\/strong\u003e: 180 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical Field of View\u003c\/strong\u003e: 65 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiagonal Field of View\u003c\/strong\u003e: 180 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Illumination\u003c\/strong\u003e: 0.002 Lux Color at F1.0, AGC On; 0 Lux with Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: ICR Auto Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000 sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 130 dB True WDR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Reduction\u003c\/strong\u003e: 2D\/3D DNR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplemental Light\u003c\/strong\u003e: Dual Light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: 30 m \/ 98.4 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarm Light Distance\u003c\/strong\u003e: 30 m \/ 98.4 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Wavelength\u003c\/strong\u003e: 850 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Streams\u003c\/strong\u003e: Dual Stream\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Bit Rate\u003c\/strong\u003e: 128 Kbps to 16 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart IR\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHLC\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBLC\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefog\u003c\/strong\u003e: Digital Defog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Intrusion Prevention\u003c\/strong\u003e: Cross Line, Intrusion, Enter Area, Leave Area\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Classification\u003c\/strong\u003e: Human, Vehicle, Non-Motor Vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeople Flow Counting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrowd Density Monitoring\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Retrieval\u003c\/strong\u003e: Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarning Light\u003c\/strong\u003e: Red and Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Compression\u003c\/strong\u003e: G.711U, G.711A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio I\/O\u003c\/strong\u003e: 1 Input \/ 1 Output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Microphone\u003c\/strong\u003e: Dual Microphone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Speaker\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Audio\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm I\/O\u003c\/strong\u003e: 1 Input \/ 1 Output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage\u003c\/strong\u003e: MicroSD up to 512 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Storage\u003c\/strong\u003e: NAS, ANR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Interface\u003c\/strong\u003e: 1 x RJ45 10\/100 Base-TX Ethernet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocols\u003c\/strong\u003e: IPv4, IPv6, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, HTTP, HTTPS, SMTP, NTP, FTP, SNMP, ONVIF and others\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eONVIF\u003c\/strong\u003e: Profile S, Profile G, Profile T, Profile M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: DC 12V +\/-25% or PoE IEEE 802.3af\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Power Consumption\u003c\/strong\u003e: 12.6W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connector\u003c\/strong\u003e: 5.5 mm Coaxial Power Plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePan Adjustment\u003c\/strong\u003e: 0 to 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt Adjustment\u003c\/strong\u003e: 0 to 75 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotate Adjustment\u003c\/strong\u003e: 0 to 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Protection\u003c\/strong\u003e: IK10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection\u003c\/strong\u003e: 4KV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 5.1 in. Diameter x 4.3 in. Height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.90 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e: -22 to 140 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e: Up to 95% RH, non-condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset Button\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CE, FCC, UL\/cUL, CB, RoHS, WEEE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51267841950002,"sku":"IPC3K28SE-ADF28KMC-DL-I0","price":422.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308912982.png?v=1785260367"},{"product_id":"honeywell-ipc3634se-adf28k-wl-i0-4mp-turret-network-camera","title":"Honeywell ipc3634se-adf28k-wl-i0 4MP Turret Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HONEYWELL ipc3634se-adf28k-wl-i0 is a 4-megapixel fixed turret IP security camera built for 24-hour full-color surveillance in demanding environments. It uses a 1\/1.8-inch CMOS sensor with an F1.0 super aperture and ColorHunter technology to deliver full-color images in near-zero-light conditions down to 0.0005 Lux. A built-in warm light illuminator reaches 30 meters (98.4 feet). The camera supports Ultra 265, H.265, H.264, and MJPEG compression with triple simultaneous streams up to 4 MP at 30 fps. Rated IP67 and IK10, it is designed for licensed security integrators and commercial surveillance installers working in both indoor and outdoor environments.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for commercial and light-industrial security installations where continuous color imaging is required around the clock. Smart intrusion prevention functions — including cross-line, intrusion, enter-area, and leave-area detection — use target classification to differentiate humans, motor vehicles, and non-motor vehicles, reducing false alarms from environmental triggers such as foliage movement and lighting changes. People flow counting and crowd density monitoring make it applicable in retail, transit, and access-control scenarios. The 9:16 corridor mode supports narrow-aisle and hallway deployments. Power is supplied via PoE (IEEE 802.3af) or DC 12 volts, keeping cabling simple in new and retrofit installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eColorHunter technology with F1.0 aperture delivers full-color imaging at minimum illumination of 0.0005 Lux\u003c\/li\u003e\n  \u003cli\u003e120 dB true Wide Dynamic Range (WDR) for clear imaging in high-contrast lighting scenes\u003c\/li\u003e\n  \u003cli\u003eSmart intrusion prevention with human, motor vehicle, and non-motor vehicle classification to reduce false alarms\u003c\/li\u003e\n  \u003cli\u003eBuilt-in warm light illuminator with effective range of 30 meters (98.4 feet)\u003c\/li\u003e\n  \u003cli\u003eIK10 vandal resistance and IP67 weatherproof rating for harsh indoor and outdoor locations\u003c\/li\u003e\n  \u003cli\u003eMicroSD edge storage up to 512 GB plus ANR and NAS (NFS) network storage support\u003c\/li\u003e\n  \u003cli\u003eONVIF Profile S, G, T, and M compatible with two-way audio and built-in microphone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with ONVIF Profile S, Profile G, Profile T, and Profile M systems. Supported client software includes EZStation and the associated mobile app. Web browser live view is supported on IE 10 and later, Chrome 45 and later, Firefox 52 and later, and Edge 79 and later with plug-in; plug-in-free live view is available on Chrome 57 and later, Firefox 58 and later, and Edge 16 and later.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed security or low-voltage technician in accordance with local electrical codes and NEC low-voltage wiring requirements. Disconnect power at the source before wiring alarm inputs, audio connections, or the coaxial power plug. When using PoE, confirm the switch or injector meets IEEE 802.3af requirements before connecting. Mount on a stable surface using appropriate anchors for the substrate; the turret head provides pan 0 to 360 degrees, tilt 0 to 75 degrees, and rotation 0 to 360 degrees for precise aiming after mounting.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 4 MP (2688 x 1520)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/1.8-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMin. Illumination\u003c\/strong\u003e: 0.0005 Lux (F1.0, AGC ON)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAperture\u003c\/strong\u003e: F1.0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFocal Length Options\u003c\/strong\u003e: 2.8 mm, 4.0 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorizontal Field of View\u003c\/strong\u003e: 110.4 degrees (2.8 mm), 88.2 degrees (4.0 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio\u003c\/strong\u003e: greater than 56 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarm Light Illumination Distance\u003c\/strong\u003e: 30 m (98.4 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: Up to 30 fps at 4 MP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Bit Rate\u003c\/strong\u003e: 128 Kbps to 16 Mbps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Streams\u003c\/strong\u003e: Triple streams\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio Compression\u003c\/strong\u003e: G.711U, G.711A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio I\/O\u003c\/strong\u003e: 1 input, 1 output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlarm I\/O\u003c\/strong\u003e: 1 input, 1 output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEdge Storage\u003c\/strong\u003e: MicroSD, up to 512 GB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNetwork Interface\u003c\/strong\u003e: 1 x RJ45 10 M\/100 M Base-TX Ethernet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: DC 12 V plus or minus 25%, PoE IEEE 802.3af\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Power Consumption\u003c\/strong\u003e: 9.0 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 5.1 inches diameter x 4.3 inches height\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.52 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact Resistance\u003c\/strong\u003e: IK10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurge Protection\u003c\/strong\u003e: 4 KV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e: -22 degrees F to 140 degrees F (-30 degrees C to 60 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e: 95% RH or less, non-condensing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CE-EMC, FCC Part 15 Class B, CE LVD, CB, UL 62368-1, CE-RoHS, WEEE, Reach, ONVIF Profile S\/G\/T\/M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HONEYWELL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3634se-adf28k-wl-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51267848569138,"sku":"IPC3634SE-ADF28K-WL-I0","price":223.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308912346.png?v=1785260453"},{"product_id":"honeywell-ipc318sr3-adf28km-g-8mp-ir-dome-camera","title":"Honeywell ipc318sr3-adf28km-g 8MP Ir Dome Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HONEYWELL ipc318sr3-adf28km-g is an 8-megapixel IR dome network camera built for professional surveillance installations. It uses a 1\/3.0-inch CMOS sensor with a maximum resolution of 3840 x 2160 at 20 fps and supports multiple lower resolutions up to 30 fps for flexible bandwidth management. The camera incorporates LightHunter technology for high-quality imaging in low-light conditions, with a minimum illumination of 0.002 Lux in color mode and 0 Lux with IR active. A 120 dB true wide dynamic range (WDR) engine handles high-contrast lighting scenes. Smart IR extends to 30 meters. Licensed security integrators and surveillance technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis dome camera is suited for indoor and outdoor deployments requiring vandal-resistant, weatherproof coverage. Its IK10 impact rating and IP67 environmental protection rating make it appropriate for demanding commercial and industrial environments. The 9:16 corridor mode supports narrow-field applications such as hallways and stairwells. A built-in microphone adds audio capture without a separate device. MicroSD support up to 256 GB provides local edge storage as a backup or standalone recording option.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e8 MP CMOS sensor with multi-stream output: 8 MP at 20 fps, 5 MP and 4 MP at 30\/25 fps, 1080p at 30\/25 fps\u003c\/li\u003e\n  \u003cli\u003eLightHunter low-light technology with minimum illumination of 0.002 Lux (color) and 0 Lux with IR\u003c\/li\u003e\n  \u003cli\u003e120 dB true WDR for clear imaging in high-contrast or backlit scenes\u003c\/li\u003e\n  \u003cli\u003eSmart IR with up to 30 meters range; IR-cut filter with auto switch (ICR) for day\/night operation\u003c\/li\u003e\n  \u003cli\u003eIK10 vandal resistance and IP67 weatherproof rating\u003c\/li\u003e\n  \u003cli\u003eSupports Ultra 265, H.265, H.264, and MJPEG compression codecs\u003c\/li\u003e\n  \u003cli\u003ePoE power supply support; onboard MicroSD slot up to 256 GB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and direct-install dome network camera for professional IP surveillance systems supporting PoE-powered IPC endpoints.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed security or low-voltage technician familiar with IP camera commissioning. Power down or disconnect the PoE switch port before making cable terminations. Verify the mounting surface can support the camera housing and allows the full pan range of 0 to 90 degrees, tilt range of 0 to 68 degrees, and rotation range of 0 to 360 degrees before securing the mount. Consult applicable local codes for surveillance equipment placement, particularly in audio-recording jurisdictions where the built-in microphone is active.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 8 MP (3840 x 2160)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/3.0-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Rates\u003c\/strong\u003e: 8 MP at 20 fps; 5 MP, 4 MP, 1080p at 30\/25 fps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Illumination\u003c\/strong\u003e: 0.002 Lux color (F1.6, AGC ON); 0 Lux with IR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: IR-cut filter with auto switch (ICR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000s\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB true WDR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio\u003c\/strong\u003e: Greater than 52 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: Up to 30 meters (98.4 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment Angle\u003c\/strong\u003e: Pan 0 to 90 degrees, Tilt 0 to 68 degrees, Rotate 0 to 360 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocal Storage\u003c\/strong\u003e: MicroSD up to 256 GB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: PoE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact Rating\u003c\/strong\u003e: IK10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HONEYWELL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc318sr3-adf28km-g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51267871703346,"sku":"IPC318SR3-ADF28KM-G","price":208.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308909338_483af173-9a05-4c60-8ad7-6e0a26b171a9.png?v=1785261087"},{"product_id":"uniview-ipc86ceb-af18kc-i0-12mp-fisheye-network-camera","title":"Uniview ipc86ceb-af18kc-i0 12MP Fisheye Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc86ceb-af18kc-i0 is a 12-megapixel fixed fisheye network camera built for wide-area surveillance in demanding environments. It uses a 1\/1.7-inch CMOS sensor paired with a 1.8 mm fixed lens to deliver a full 180-degree horizontal, vertical, and diagonal field of view with a maximum resolution of 4000 x 3000 pixels. Embedded 850 nm IR illuminators provide up to 15 meters of infrared coverage with 360-degree fill-in light. The camera supports Ultra 265, H.265, H.264, and MJPEG compression and outputs triple simultaneous video streams. A built-in dual microphone and speaker enable two-way audio. It is installed by licensed security integrators and surveillance technicians in commercial and institutional settings.\u003c\/p\u003e\u003cp\u003eThis camera is suited for ceiling, table, or wall-mount deployment in retail, transportation, warehouses, lobbies, and other large open areas where a single device must cover an entire zone. Multiple hardware and software decoding modes allow flexible live view layouts including fisheye, panorama, and virtual PTZ views. The heatmap analytics function works with a compatible video management platform to visualize movement patterns in real time. Edge storage via microSD card up to 512 GB supports local recording independent of network storage, and ANR and NAS (NFS) network storage options are also available.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e12 MP (4000 x 3000) resolution with 1\/1.7-inch CMOS sensor\u003c\/li\u003e\n\u003cli\u003eFull 180-degree field of view in all planes via 1.8 mm fixed fisheye lens\u003c\/li\u003e\n\u003cli\u003e360-degree IR fill-in light reaching up to 15 meters, auto or manual control\u003c\/li\u003e\n\u003cli\u003eUltra 265, H.265, H.264, and MJPEG compression with triple video streams\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual microphone and speaker for two-way audio\u003c\/li\u003e\n\u003cli\u003eIK10 vandal resistance and IP67 weatherproof protection\u003c\/li\u003e\n\u003cli\u003eHeatmap statistical analysis, cross-line detection, and intrusion detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eSupports ONVIF Profile S, Profile G, Profile T, and Profile M for integration with compatible video management systems. Client software includes EZStation desktop application and mobile app. Compatible web browsers for plug-in live view include IE 10 and later, Chrome 45 and later, Firefox 52 and later, and Edge 79 and later.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified security technician familiar with IP camera deployment and low-voltage cabling practices. Power down or disconnect PoE switch ports before connecting or disconnecting the camera. The camera accepts DC 12 volts or PoE (IEEE 802.3af) power; verify the power source before installation. Mount location and cable routing should comply with applicable local electrical and building codes.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 12 MP (4000 x 3000)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/1.7-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal Length\u003c\/strong\u003e: 1.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField of View\u003c\/strong\u003e: 180 degrees horizontal, 180 degrees vertical, 180 degrees diagonal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Illumination Distance\u003c\/strong\u003e: 15 meters (49.3 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Wavelength\u003c\/strong\u003e: 850 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Illumination\u003c\/strong\u003e: 0.03 Lux color (F2.0, AGC ON), 0 Lux with IR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Bit Rate\u003c\/strong\u003e: 128 Kbps to 16 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Compression\u003c\/strong\u003e: G.711U, G.711A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Storage\u003c\/strong\u003e: MicroSD, up to 512 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Interface\u003c\/strong\u003e: 1 x RJ45 10M\/100M Base-TX Ethernet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: DC 12 volts plus or minus 25%, PoE (IEEE 802.3af)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption\u003c\/strong\u003e: Max. 12.0 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 5.9 inches diameter x 2.2 inches height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Metal and Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature\u003c\/strong\u003e: -22 degrees F to 140 degrees F (-30 degrees C to 60 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Humidity\u003c\/strong\u003e: 95% RH or less, non-condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection\u003c\/strong\u003e: 4 KV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67 (IEC 60529)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Protection\u003c\/strong\u003e: IK10 (IEC 62262)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CE-EMC, FCC Part 15B, CE LVD, CB (IEC 62368-1), UL\/CUL (UL 62368-1), CE-RoHS, WEEE, ONVIF Profile S\/G\/T\/M\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc86ceb-af18kc-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51523344924978,"sku":"IPC86CEB-AF18KC-I0","price":923.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0320eb60180b7037ef2746a9a39d2f2c.png?v=1785440299"},{"product_id":"uniview-nsw2020-16t1gt1gc-poe-in-16-port-poe-switch","title":"Uniview nsw2020-16t1gt1gc-poe-in 16-port Poe Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW nsw2020-16t1gt1gc-poe-in is a 16-port 10\/100 Mbps Power over Ethernet (PoE) network switch designed for structured cabling and IP device deployments. It provides PoE power delivery across all 16 access ports, eliminating the need for separate power adapters at each endpoint. Two uplink ports extend network connectivity to upstream switches or routers. This switch is typically installed by network technicians, security integrators, and low-voltage electricians in commercial and residential surveillance or access control systems.\u003c\/p\u003e\n\u003cp\u003eThis switch suits installations where multiple PoE-powered devices such as IP cameras, access control readers, VoIP phones, or wireless access points must be connected through a single managed or unmanaged layer-2 switching platform. The two uplink ports allow the unit to feed into a core or aggregation switch, supporting scalable network topologies in small to mid-size deployments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e16 x 10\/100 Mbps PoE-enabled access ports for IP device connectivity and power delivery\u003c\/li\u003e\n  \u003cli\u003e2 uplink ports for connection to upstream network infrastructure\u003c\/li\u003e\n  \u003cli\u003ePoE eliminates dedicated power runs to connected endpoints\u003c\/li\u003e\n  \u003cli\u003eCompact form factor suited for wiring closets and equipment racks\u003c\/li\u003e\n  \u003cli\u003eDesigned for IP surveillance, VoIP, and wireless access point deployments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-install PoE switch for use with PoE-compatible IP network devices in small to mid-size structured cabling environments.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage technician or network integrator. Power down all connected devices and verify PoE budget requirements before connecting endpoints. Follow local low-voltage wiring codes and manufacturer documentation for rack mounting and cable management. Do not exceed the total PoE power budget of the switch across all active ports.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAccess Ports\u003c\/strong\u003e: 16 x 10\/100 Mbps PoE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUplink Ports\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoE Support\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw2020-16t1gt1gc-poe-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51523596386610,"sku":"NSW2020-16T1GT1GC-POE-IN","price":218.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ab9a044540328628c015ff1451044597.jpg?v=1785443188"},{"product_id":"uniview-tr-sm05-in-switch-box-adapter-fixed-dome","title":"Uniview tr-sm05-in Switch Box Adapter Fixed Dome","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-sm05-in is an electric-box transfer plate designed to mount fixed dome IP cameras to a standard electrical switch box. Made from aluminum, this adapter bridges the gap between a flush-mounted switch box and the camera base, providing a clean and secure installation surface. The plate measures 5.0 inches in diameter by 0.7 inches deep and weighs 0.33 pounds. It is intended for use by security system installers and low-voltage technicians working on structured cabling and IP camera deployments in commercial and residential settings.\u003c\/p\u003e\n\u003cp\u003eThis adapter is compatible with select UNIVIEW fixed dome camera series including IPC32X Series, IPC361XX Series, IPC21XX Series, IPC231X SB Series, and IPC232X LB Series. It is suited for wall or ceiling installations where an existing electrical box is present and a surface-mount or pendant-mount bracket is not required. The lightweight aluminum construction keeps overall camera assembly weight low, which is important in drop-ceiling and drywall applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum construction for lightweight, durable mounting support\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with standard electrical switch boxes\u003c\/li\u003e\n  \u003cli\u003eCompact profile at 5.0 inches diameter by 0.7 inches depth\u003c\/li\u003e\n  \u003cli\u003eCompatible with multiple UNIVIEW IPC fixed dome camera series\u003c\/li\u003e\n  \u003cli\u003eWeighs 0.33 pounds for minimal load on mounting surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with UNIVIEW IPC32X Series, IPC361XX Series, IPC21XX Series, IPC231X SB Series, and IPC232X LB Series fixed dome cameras mounted over a standard electrical switch box.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified low-voltage or security systems technician in accordance with applicable local codes. Disconnect power to the electrical box before beginning any work. Confirm the switch box is rated to support the combined weight of the adapter and camera assembly. Verify camera series compatibility before mounting to avoid misalignment with the camera base footprint.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Electric-box transfer plate for fixed dome cameras\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 5.0 inches diameter x 0.7 inches depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 0.33 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-sm05-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51523862462770,"sku":"TR-SM05-IN","price":25.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3f21a978b57885d650b23b0beb35a9ad.png?v=1785444175"},{"product_id":"uniview-nsw20105gtpoein-4-port-gigabit-poe-switch","title":"Uniview nsw20105gtpoein 4 Port Gigabit Poe Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW nsw20105gtpoein is a 4-port gigabit PoE Ethernet switch designed to deliver both data and power over a single RJ45 cable to connected devices. It provides four 1000 Mbps PoE-enabled ports and one additional 1000 Mbps RJ45 uplink port. This switch is built for security, networking, and AV installations where powered endpoints such as IP cameras, VoIP phones, and wireless access points need reliable gigabit connectivity without separate power adapters at each device. Licensed electricians, low-voltage technicians, and network installers are the primary trades working with this hardware.\u003c\/p\u003e\n\u003cp\u003eThe nsw20105gtpoein fits residential, commercial, and institutional network deployments. Typical install scenarios include surveillance system closets, small data rooms, structured cabling setups, and network distribution points where multiple PoE devices must be powered and networked from a single compact unit. Its form factor suits wall-mount enclosures, rack shelves, or open-shelf network cabinets in environments requiring consistent long-term operation and stable throughput across all active ports simultaneously.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFour 1000 Mbps PoE RJ45 ports deliver data and power over a single cable to each connected device\u003c\/li\u003e\n  \u003cli\u003eOne dedicated 1000 Mbps RJ45 uplink port for upstream network connectivity\u003c\/li\u003e\n  \u003cli\u003eGigabit speed on all ports supports high-bandwidth devices including HD and 4K IP cameras\u003c\/li\u003e\n  \u003cli\u003eCompact design suitable for network closets, structured cabling enclosures, and small data rooms\u003c\/li\u003e\n  \u003cli\u003eEliminates the need for individual power supplies at each PoE-powered endpoint\u003c\/li\u003e\n  \u003cli\u003eCompatible with IP cameras, VoIP phones, and wireless access points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style gigabit PoE switch compatible with IEEE 802.3af and 802.3at PoE-enabled devices including IP cameras, VoIP phones, and wireless access points used in security, networking, and AV installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage technician or network installer. Power down the upstream network equipment before connecting or disconnecting uplink cabling. Verify that the total PoE power draw of connected devices does not exceed the switch rated PoE budget before energizing all ports. Follow applicable local low-voltage wiring codes and TIA-568 structured cabling standards when terminating RJ45 connections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoE Port Count\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUplink Port Count\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePort Speed\u003c\/strong\u003e: 1000 Mbps (all ports)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector Type\u003c\/strong\u003e: RJ45\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw20105gtpoein\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51523939107122,"sku":"NSW20105GTPOEIN","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4303f09b4cc05000034abb5b126d3310.jpg?v=1785444471"},{"product_id":"uniview-ipc8645ea-adzkm-i1-20mp-panoramic-dome-camera","title":"Uniview ipc8645ea-adzkm-i1 20MP Panoramic Dome Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc8645ea-adzkm-i1 is a 20MP four-directional panoramic dome network camera designed for high-detail surveillance in complex commercial and industrial environments. It combines four independent 5MP CMOS sensors on a single IP stream, each with a 2.7 to 13.5 mm motorized varifocal lens and 5X optical zoom. Lighthunter technology delivers usable color imagery down to 0.002 lux, while 130 dB true wide dynamic range keeps footage clear in harsh backlight conditions. Each lens supports independent pan, tilt, and rotation adjustment, giving installers precise coverage control across a wide area. Licensed security integrators and network video system technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for large open spaces requiring multi-zone coverage from a single mounting point, including retail floors, warehouses, transit hubs, lobbies, and perimeter installations. The four-channel video output delivers 2880 x 1620 at 30 fps per channel in the main stream, supporting detailed forensic review. Built-in smart intrusion prevention with false alarm filtering and people counting with crowd density monitoring make it appropriate for both security and operational analytics deployments. IP67 and IK10 ratings qualify it for covered outdoor and semi-exposed locations subject to weather or physical impact.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFour independent 5MP sensors on one IP address, each with individually adjustable pan (0 degrees to 360 degrees), tilt (0 degrees to 65 degrees), and rotation (0 degrees to 355 degrees)\u003c\/li\u003e\n  \u003cli\u003eLighthunter low-light technology with minimum color illumination of 0.002 lux at F1.2 with AGC on; 0 lux with IR activated\u003c\/li\u003e\n  \u003cli\u003e130 dB true WDR for clear imaging in high-contrast lighting conditions\u003c\/li\u003e\n  \u003cli\u003e2.7 to 13.5 mm varifocal lens with 5X optical zoom and F1.2 fixed iris per channel\u003c\/li\u003e\n  \u003cli\u003eUltra 265, H.265, H.264, and MJPEG compression support\u003c\/li\u003e\n  \u003cli\u003eSmart intrusion prevention with false alarm filtering based on specific target detection\u003c\/li\u003e\n  \u003cli\u003ePeople flow counting and crowd density monitoring built in\u003c\/li\u003e\n  \u003cli\u003eIP67 weatherproof and IK10 vandal-resistant construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style network dome camera compatible with ONVIF-compliant video management systems supporting multi-channel IP camera integration.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed security integrator or qualified network video technician familiar with IP camera deployment and PoE or 12V DC power infrastructure. Power down the network switch port or power supply before making any electrical connections. Each lens channel should be aimed and locked independently after mounting to ensure full coverage of the intended zones. Verify local building and electrical codes for conduit and junction box requirements before running cabling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 4 x 5MP (20MP total)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7 inch CMOS x 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Illumination\u003c\/strong\u003e: Color 0.002 lux (F1.2, AGC on); 0 lux with IR on\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 130 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: IR-cut filter with auto switch (ICR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFocal Length\u003c\/strong\u003e: 2.7 to 13.5 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptical Zoom\u003c\/strong\u003e: 5X\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIris\u003c\/strong\u003e: F1.2 fixed x 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eField of View (H)\u003c\/strong\u003e: 110.3 degrees (wide) to 31 degrees (tele)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eField of View (V)\u003c\/strong\u003e: 57.1 degrees (wide) to 17.5 degrees (tele)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eField of View (D)\u003c\/strong\u003e: 143.4 degrees (wide) to 38.1 degrees (tele)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment Angles\u003c\/strong\u003e: Pan 0 degrees to 360 degrees, Tilt 0 degrees to 65 degrees, Rotate 0 degrees to 355 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e: Greater than 56 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67, IK10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc8645ea-adzkm-i1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524283400498,"sku":"IPC8645EA-ADZKM-I1","price":2127.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0ab6bf4cc477afd55312fbfc876a2ba3.png?v=1785445658"},{"product_id":"uniview-tr-jb03-i-in-turret-camera-junction-box","title":"Uniview tr-jb03-i-in Turret Camera Junction Box","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-jb03-i-in is a wall-mount junction box designed for turret-style security cameras. It provides a clean, protected enclosure for wiring terminations at the mounting surface, supporting rear-exit wiring so cables route directly through the wall rather than along the surface. The housing is cast from aluminum alloy for durability in typical installation environments. At 4.6 inches in diameter and 1.5 inches deep, it sits flush against the wall and keeps the installation profile low. Security installers and low-voltage technicians use this bracket to achieve a finished, concealed-wiring appearance on fixed-dome and turret camera deployments.\u003c\/p\u003e\n\u003cp\u003eThis junction box is intended for wall installation and is compatible with the IPC36XXL Series fixed dome cameras from UNIVIEW. It is suited for both commercial and residential camera installations where rear wiring through the wall is the preferred or required method. The compact form factor makes it appropriate for drywall, concrete, and block wall substrates with appropriate anchoring hardware.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports rear-exit wiring to conceal cables within the wall\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction for a rigid, durable mount\u003c\/li\u003e\n  \u003cli\u003e4.6-inch diameter profile fits standard camera footprints\u003c\/li\u003e\n  \u003cli\u003e1.5-inch depth accommodates wiring connections behind the camera\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.44 pounds, reducing stress on the wall anchor points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for wall installation with the UNIVIEW IPC36XXL Series fixed dome and turret cameras.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage or security systems technician. De-energize all associated camera circuits before making wiring connections inside the box. Anchor selection should be appropriate for the wall substrate — use manufacturer-rated anchors for concrete or masonry installations. Verify local codes and any applicable NEC low-voltage wiring requirements before roughing in the wall penetration.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Wall installation for IPC36XXL Series fixed dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 4.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.44 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb03-i-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524362830130,"sku":"TR-JB03-I-IN","price":26.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5e2c4435a290f10317bcc109a2d6dce4.png?v=1785446995"},{"product_id":"uniview-tr-jb07-wm03-g-in-wall-mount-camera-bracket","title":"Uniview tr-jb07\/wm03-g-in Wall Mount Camera Bracket","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW tr-jb07\/wm03-g-in is a wall mounting assembly bracket designed for fixed dome and turret-style security cameras. Built from aluminum alloy, it provides a rigid, corrosion-resistant mounting platform suited for both indoor and outdoor installation environments. The bracket measures 9.1 inches x 4.9 inches x 5.1 inches and weighs 2.20 pounds, making it a sturdy yet manageable component for professional camera installation. It features an extra back outlet for clean cable routing through the wall, reducing exposed wiring and supporting a professional finish. Security installers and low-voltage technicians will find this bracket a straightforward fit for fixed dome camera deployments.\u003c\/p\u003e\u003cp\u003eThis bracket is designed for wall installation applications where fixed dome and turret cameras require a secure, adjustable mounting point. It is specifically noted for use with the IPC36XXL series fixed dome cameras with extra back outlet configurations. The bracket suits commercial and residential security system installations where wall-mounted camera placement is required and clean cable management through the mounting surface is a priority.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminum alloy construction for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eExtra back outlet for concealed cable routing through the wall surface\u003c\/li\u003e\n\u003cli\u003eCompact profile at 9.1 inches x 4.9 inches x 5.1 inches\u003c\/li\u003e\n\u003cli\u003eLightweight at 2.20 pounds for easier single-technician installation\u003c\/li\u003e\n\u003cli\u003eCompatible with fixed dome and turret camera form factors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for wall installation with the UNIVIEW IPC36XXL series fixed dome cameras requiring an extra back outlet. Also noted as compatible with mini fixed dome and plastic turret camera configurations of the same general form factor.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed low-voltage technician or qualified security systems installer. Confirm the mounting surface can support the bracket and camera assembly weight before securing. Route camera cabling through the back outlet prior to finalizing the bracket position against the wall. Power down any connected camera or recording equipment before making wiring connections at the camera head.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Wall installation for fixed dome and turret cameras\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 9.1 inches x 4.9 inches x 5.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 2.20 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing\u003c\/strong\u003e: Extra back outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb07\/wm03-g-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524363190578,"sku":"TR-JB07\/WM03-G-IN","price":60.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8f988735567b40a97b7eba3a2dc1c082.png?v=1785447005"},{"product_id":"uniview-ipc3614sr-adf40km-h-4mp-fixed-dome-camera-4mm","title":"Uniview ipc3614sr-adf40km-h 4MP Fixed Dome Camera 4mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc3614sr-adf40km-h is a 4-megapixel fixed dome IP security camera designed for professional surveillance installations in commercial and residential applications. Built around a 1\/3-inch progressive scan CMOS sensor and a 4.0mm fixed lens at F1.6, it delivers sharp, high-detail imaging at resolutions up to 2688 x 1520 at 25 frames per second. The 120dB Wide Dynamic Range engine handles high-contrast scenes such as entryways and loading docks. A minimum illumination rating of 0.003 Lux with AGC on, combined with onboard 850nm IR illumination effective to 30 meters (98 feet), keeps coverage active around the clock without additional lighting. Licensed CCTV technicians and low-voltage security integrators are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for fixed indoor or outdoor mounting where a wider field of view is not required and longer detection range matters. The 4.0mm lens produces an 83.7-degree horizontal angle of view, with DORI performance rated at 90 meters detect, 36 meters observe, 18 meters recognize, and 9 meters identify. IP67-rated housing makes it appropriate for exterior soffits, parking structures, and covered entryways. The built-in microphone supports audio detection and suppression without an external mic add-on. Local storage via a MicroSD card slot allows edge recording independent of a network recorder. Power is supplied via DC 12 volts or 802.3af PoE, giving installers flexibility in how they run infrastructure.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4MP 2688 x 1520 resolution at up to 25 fps with Ultra 265, H.265, H.264, and MJPEG compression support\u003c\/li\u003e\n  \u003cli\u003e120dB Wide Dynamic Range for high-contrast lighting environments\u003c\/li\u003e\n  \u003cli\u003eIR illumination up to 30 meters (98 feet) at 850nm with auto or manual IR on\/off control\u003c\/li\u003e\n  \u003cli\u003eLightHunter low-light technology: 0.003 Lux color at F1.6 AGC on, 0 Lux with IR active\u003c\/li\u003e\n  \u003cli\u003eBehavior detection including cross-line, intrusion, motion detection, tampering alarm, and audio detection based on human body detection\u003c\/li\u003e\n  \u003cli\u003eBuilt-in microphone with audio suppression and G.711 compression\u003c\/li\u003e\n  \u003cli\u003eMicroSD card slot for local edge storage\u003c\/li\u003e\n  \u003cli\u003eIP67 weatherproof housing; CE and FCC certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with ONVIF Profile S, Profile G, and Profile T for integration into standards-compliant VMS platforms. Supported client software includes EZStation, EZView, and EZLive. Web browser live view is supported plug-in free on Chrome 57.0 and above, Firefox 58.0 and above, Edge 16 and above, and Safari 11 and above.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed low-voltage or security systems technician in accordance with applicable local codes. Power down or disconnect the PoE switch port or DC 12-volt power supply before making any wiring connections. Confirm the mounting surface can support the camera housing and that conduit or cable management meets local building requirements. When configuring network settings, apply access policies, RTSP authentication, and HTTPS to align with site security standards before placing the camera online.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/3 inch, 4.0 megapixel, progressive scan CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 2688 x 1520 (4MP)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e: 4.0mm fixed, F1.6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorizontal Angle of View\u003c\/strong\u003e: 83.7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVertical Angle of View\u003c\/strong\u003e: 44.9 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiagonal Angle of View\u003c\/strong\u003e: 89.2 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustment Angle\u003c\/strong\u003e: Pan 0 to 360 degrees, Tilt 0 to 80 degrees, Rotate 0 to 360 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Illumination\u003c\/strong\u003e: 0.003 Lux at F1.6 AGC on (color); 0 Lux with IR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Range\u003c\/strong\u003e: Up to 30 meters (98 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Wavelength\u003c\/strong\u003e: 850nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000 second\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal to Noise Ratio\u003c\/strong\u003e: Greater than 56dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Frame Rate\u003c\/strong\u003e: 25 fps at 4MP (2688 x 1520)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Bit Rate\u003c\/strong\u003e: 128 Kbps to 16 Mbps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNoise Reduction\u003c\/strong\u003e: 2D\/3D DNR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: IR-cut filter with auto switch (ICR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio Compression\u003c\/strong\u003e: G.711\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocal Storage\u003c\/strong\u003e: MicroSD card slot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: DC 12 volts or PoE (802.3af)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CE, FCC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eONVIF Compliance\u003c\/strong\u003e: Profile S, Profile G, Profile T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3614sr-adf40km-h\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524398481714,"sku":"IPC3614SR-ADF40KM-H","price":162.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/65e964afe31e877da46496c71b99973f.jpg?v=1785447946"},{"product_id":"uniview-tr-se24-in-mounting-extension-adapter","title":"Uniview tr-se24-in Mounting Extension Adapter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-se24-in is a mounting extension adapter designed to increase the mounting depth in indoor surveillance camera installations. It provides additional clearance for cameras and accessory components, supporting proper field of view alignment and mechanical fit. The adapter integrates with compatible enclosure systems and allows cables and connectors to be routed behind the enclosure for a clean, concealed finish. Installation professionals in commercial, residential, and institutional settings rely on this type of extension to achieve precise camera positioning without exposed wiring.\u003c\/p\u003e\n\u003cp\u003eThe tr-se24-in is suited for indoor surveillance deployments where standard mounting depth is insufficient for the installed camera or accessory stack. It is engineered to work with the TR-CM24-IN enclosure system, extending the base mounting column to accommodate deeper camera bodies or additional hardware components. This adapter is applicable in both new construction builds and retrofit scenarios where existing mounting points require additional standoff to achieve proper camera alignment and coverage.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreases mounting depth to accommodate larger camera bodies or accessory components\u003c\/li\u003e\n  \u003cli\u003eCompatible with TR-CM24-IN indoor enclosure systems\u003c\/li\u003e\n  \u003cli\u003eSupports concealed cable routing behind the enclosure for a clean installation\u003c\/li\u003e\n  \u003cli\u003eSuitable for new construction and retrofit indoor surveillance projects\u003c\/li\u003e\n  \u003cli\u003eMaintains professional aesthetics while preserving service access for maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the UNIVIEW TR-CM24-IN indoor mounting enclosure system as a depth extension accessory.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed security or low-voltage technician. Power to the camera and any associated equipment should be disconnected before mounting or adjusting the extension adapter. Verify that all mating surfaces and fasteners are fully seated and secure before restoring power and repositioning the camera. Follow applicable local codes and manufacturer enclosure guidelines for indoor surveillance mounting assemblies.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Indoor surveillance camera mounting extension\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Enclosure\u003c\/strong\u003e: TR-CM24-IN\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-se24-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524398973234,"sku":"TR-SE24-IN","price":16.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9b721e6dc2672c026d3d2bfdf8607463.jpg?v=1785447965"},{"product_id":"uniview-tr-jb03-h-in-turret-camera-junction-box","title":"Uniview tr-jb03-h-in Turret Camera Junction Box","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-jb03-h-in is an aluminum alloy junction box designed for fixed lens motorized turret cameras. It provides a clean, protected termination point for camera wiring routed from behind the mounting surface, keeping cable connections concealed and secure at the install point. Measuring 4.96 inches by 1.42 inches and weighing 0.53 pounds, this compact box suits both new construction and retrofit applications where a tidy wall or ceiling penetration is required. Security installers and low-voltage technicians will find it straightforward to integrate into standard turret camera deployments.\u003c\/p\u003e\n\u003cp\u003eThis junction box is intended for use with metal turret cameras that support rear-entry wiring. It is well suited to residential and light commercial surveillance installations where cables are run inside walls, ceilings, or conduit before terminating at the camera mount point. The rear-wiring design keeps conduit and cable runs hidden from view, which is a common requirement in finished interior spaces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSupports rear-entry wiring for clean, concealed cable management\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction for durability and stable mounting\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 4.96 inches by 1.42 inches fits standard camera mounting locations\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.53 pounds for easy single-technician installation\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for fixed lens motorized turret camera mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style junction box for UNIVIEW fixed lens motorized turret cameras that support rear-entry wiring configurations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified low-voltage or security systems technician in accordance with applicable local codes and NEC guidelines. De-energize all circuits before making wiring connections at the junction box. Ensure the mounting surface is solid and capable of supporting the camera and box assembly before securing. Do not overtighten fasteners against the aluminum alloy housing, as this can strip threads or distort the mounting face.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 4.96 inches x 1.42 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.53 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb03-h-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524427219250,"sku":"TR-JB03-H-IN","price":26.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d48456f11f80559fe8557eb96a79024.jpg?v=1785448858"},{"product_id":"uniview-ipc3614sb-adf28kmc-i0-4mp-turret-network-camera","title":"Uniview ipc3614sb-adf28kmc-i0 4MP Turret Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc3614sb-adf28kmc-i0 is a 4-megapixel fixed turret network camera designed for professional IP video surveillance installations. Built around a 1\/2.7-inch CMOS sensor, it delivers clear, detailed imaging at resolutions up to 2688 x 1520 at 30 frames per second. The dual-light design supports both white light and infrared illumination, giving installers flexibility for full-color or low-light monochrome coverage depending on scene requirements. Video compression options include Ultra 265, H.265, H.264, and MJPEG, allowing network bandwidth optimization to suit the recording infrastructure on site.\u003c\/p\u003e\u003cp\u003eThis camera is suited for commercial and light-industrial surveillance deployments where perimeter monitoring and intrusion detection are priorities. The Tri-Guard platform integrates smart intrusion prevention analytics directly in the camera, reducing reliance on server-side processing. Typical install scenarios include building entrances, parking areas, and interior common spaces requiring continuous 24-hour coverage. Licensed security integrators and low-voltage installation technicians are the primary trades responsible for mounting, cabling, and commissioning this unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 MP resolution at up to 2688 x 1520 pixels, 30 fps\u003c\/li\u003e\n\u003cli\u003e1\/2.7-inch CMOS sensor for reliable low-light performance\u003c\/li\u003e\n\u003cli\u003eDual-light illumination: white light and infrared in a single unit\u003c\/li\u003e\n\u003cli\u003eUltra 265, H.265, H.264, and MJPEG compression supported\u003c\/li\u003e\n\u003cli\u003eBuilt-in smart intrusion prevention: cross line, intrusion, enter area, and leave area detection\u003c\/li\u003e\n\u003cli\u003eMultiple resolution modes: 4 MP, 3 MP, and 1080p selectable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-install turret network camera compatible with standard IP video management systems supporting ONVIF-profile network cameras.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed low-voltage or security systems technician in accordance with local codes and NEC Article 725 for Class 2 wiring. Power down the network switch port or PoE injector before connecting or disconnecting the camera. Ensure the mounting surface is rated for the camera weight and that all cable penetrations are sealed to maintain the enclosure integrity rating. Verify network switch PoE wattage allocation before commissioning.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 4 MP (2688 x 1520)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: 30\/25 fps at 4 MP, 3 MP, and 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination Type\u003c\/strong\u003e: Dual-light (white light and infrared)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalytics\u003c\/strong\u003e: Cross line, intrusion, enter area, leave area detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3614sb-adf28kmc-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524472308018,"sku":"IPC3614SB-ADF28KMC-I0","price":228.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2faa24033484582ad67a1fe0ee4cb629.png?v=1785449800"},{"product_id":"uniview-tr-jb03-h-in-bk-fixed-dome-junction-box-black","title":"Uniview tr-jb03-h-in-bk Fixed Dome Junction Box Black","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW tr-jb03-h-in-bk is a junction box designed for fixed dome and fisheye security cameras. Built from aluminum alloy, it provides a durable, lightweight enclosure that protects camera wiring during wall and ceiling installations. The compact round housing keeps cables and connectors safely enclosed, supporting a clean, professional finish at the install point. Licensed security installers and low-voltage technicians use this box to route cabling before mounting the camera, eliminating exposed wiring and reducing callback risk. The black finish is matched to compatible camera bodies, keeping the installation visually consistent across commercial and residential deployments.\u003c\/p\u003e\u003cp\u003eThis junction box suits fixed dome and fisheye camera installations in both residential and commercial security systems. It is appropriate for new construction rough-in as well as retrofit work where clean cable management is required at the camera mount point. Wall and ceiling mounting configurations are both supported, making it a versatile back-box option across a range of interior deployment scenarios. No specific compatible camera model numbers are stated in the available product data.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminum alloy construction provides durability with low added weight at the mount point\u003c\/li\u003e\n\u003cli\u003eCompact round housing encloses cables and connectors for a clean, finished appearance\u003c\/li\u003e\n\u003cli\u003eBlack finish coordinates with matching fixed dome and fisheye camera bodies\u003c\/li\u003e\n\u003cli\u003eSupports both wall and ceiling installation orientations\u003c\/li\u003e\n\u003cli\u003eDesigned for commercial and residential interior security camera deployments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style junction box for use with UNIVIEW fixed dome and fisheye cameras in interior installations. Verify camera base diameter and mounting hole pattern against the camera model before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by a licensed low-voltage technician or security systems installer. Power down or de-energize all associated camera circuits before pulling cable or making connections at the junction box. Ensure all cabling is routed and dressed inside the housing before securing the camera to the box to avoid pinching conductors. Follow local building codes and any applicable NEC low-voltage wiring requirements for the installation environment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Type Compatibility\u003c\/strong\u003e: Fixed Dome, Fisheye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Wall, Ceiling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb03-h-in-bk\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524503535922,"sku":"TR-JB03-H-IN-BK","price":28.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c1825e5ac705c32a12bff44ba9188d19.jpg?v=1785450262"},{"product_id":"uniview-ipc3615sr3-adf28km-g-5mp-ir-eyeball-camera","title":"Uniview ipc3615sr3-adf28km-g 5MP Ir Eyeball Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc3615sr3-adf28km-g is a 5-megapixel fixed IR eyeball network camera designed for IP-based video surveillance installations. Built around a 1\/2.7-inch CMOS sensor, it delivers full 5 MP resolution with a wide dynamic range of 120 dB, making it well-suited for scenes with challenging lighting conditions. The integrated IR-cut filter with auto switch (ICR) provides reliable day-to-night transition, and the Easystar low-light mode achieves color imaging down to 0.003 Lux, with true 0 Lux capability when IR illumination is active. Security system installers and integrators are the primary trades for this product.\u003c\/p\u003e\n\u003cp\u003eThis camera is intended for indoor or outdoor fixed-mount surveillance applications in residential and light commercial settings. The eyeball-style housing supports pan adjustment from 0 to 360 degrees, tilt from 0 to 80 degrees, and rotation from 0 to 360 degrees, allowing precise aim after mounting. It suits entry points, parking areas, retail floors, and similar coverage zones where a discreet dome-profile camera is preferred. Network-based deployment means it integrates into existing IP video management systems without analog infrastructure.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5 MP maximum resolution via 1\/2.7-inch CMOS sensor\u003c\/li\u003e\n  \u003cli\u003e120 dB wide dynamic range for high-contrast scene handling\u003c\/li\u003e\n  \u003cli\u003eEasystar low-light color imaging at 0.003 Lux (F1.6, AGC ON)\u003c\/li\u003e\n  \u003cli\u003e0 Lux IR capability for complete darkness operation\u003c\/li\u003e\n  \u003cli\u003eICR day\/night filter with automatic switching\u003c\/li\u003e\n  \u003cli\u003eFull 360-degree pan and rotate adjustment with 80-degree tilt range\u003c\/li\u003e\n  \u003cli\u003eAuto and manual shutter control from 1 to 1\/100000 second\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style fixed network camera for integration into IP-based video surveillance systems supporting standard network camera protocols.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a licensed security systems integrator or low-voltage technician. Power down or disconnect the network feed before wiring the camera to the mounting surface. Confirm the network switch or injector supports the required PoE standard before connecting. Follow all applicable local low-voltage and building codes during cable routing and junction box work.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 5 MP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7 inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMin. Illumination (Color)\u003c\/strong\u003e: 0.003 Lux (F1.6, AGC ON)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMin. Illumination (IR)\u003c\/strong\u003e: 0 Lux\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: IR-cut filter with auto switch (ICR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000 second\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePan Adjustment\u003c\/strong\u003e: 0 to 360 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTilt Adjustment\u003c\/strong\u003e: 0 to 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRotate Adjustment\u003c\/strong\u003e: 0 to 360 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio\u003c\/strong\u003e: greater than 52 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Dynamic Range\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3615sr3-adf28km-g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524548624690,"sku":"IPC3615SR3-ADF28KM-G","price":144.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a317607374777ec66df49ad2c8af9e0b.png?v=1785451338"},{"product_id":"uniview-ipc3618sr3-adf28km-g-8mp-ir-eyeball-network-camera","title":"Uniview ipc3618sr3-adf28km-g 8MP Ir Eyeball Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc3618sr3-adf28km-g is an 8-megapixel fixed IR eyeball-style IP network camera designed for professional security installations. Built around a 1\/2.7-inch CMOS sensor, it delivers up to 3840x2160 resolution at 20 fps and supports multiple lower-resolution modes down to 1080p at 30 fps. Compression options include Ultra 265, H.265, H.264, and MJPEG, keeping bandwidth and storage demands manageable. Smart IR illumination reaches up to 30 meters, and the 120 dB true WDR engine maintains detail in high-contrast lighting. Easystar low-light technology achieves color imaging down to 0.005 Lux, making it suitable for dimly lit environments.\u003c\/p\u003e\u003cp\u003eThis camera is used in commercial and residential IP video surveillance systems where fixed wide-angle coverage is required. It supports corridor mode (9:16 aspect ratio), which is useful for hallways, stairwells, and narrow passages. Power is supplied via PoE, eliminating a separate power run. The built-in microphone adds audio capture without additional hardware. On-board MicroSD storage supports cards up to 256 GB for edge recording. Installation professionals in low-voltage and electronic security trades are the primary installers of this unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8 MP 1\/2.7-inch CMOS sensor with up to 3840x2160 at 20 fps\u003c\/li\u003e\n\u003cli\u003eSmart IR with up to 30 meters of illumination distance\u003c\/li\u003e\n\u003cli\u003e120 dB true WDR for clear imaging in strong backlight or mixed-light scenes\u003c\/li\u003e\n\u003cli\u003eEasystar low-light technology rated down to 0.005 Lux (color, F1.6, AGC ON) and 0 Lux with IR active\u003c\/li\u003e\n\u003cli\u003eUltra 265, H.265, H.264, and MJPEG compression support\u003c\/li\u003e\n\u003cli\u003e9:16 corridor mode, built-in microphone, and MicroSD slot up to 256 GB\u003c\/li\u003e\n\u003cli\u003eIP67-rated housing and PoE power input\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style fixed eyeball IP camera for use within ONVIF-compatible network video recorder systems and PoE network infrastructure supporting IEEE 802.3af or 802.3at standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed low-voltage or electronic security technicians. Before mounting or wiring, de-energize the PoE switch port or injector feeding the camera. The pan, tilt, and rotate adjustment range allows precise aiming after mounting — pan 0 to 360 degrees, tilt 0 to 80 degrees, and rotate 0 to 360 degrees. Verify that the MicroSD card is seated before securing the housing cover, as access may require disassembly after install.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 8 MP (3840x2160)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Rates\u003c\/strong\u003e: 8 MP at 20 fps; 5 MP at 30\/25 fps; 4 MP at 30\/25 fps; 1080p at 30\/25 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Illumination\u003c\/strong\u003e: 0.005 Lux color (F1.6, AGC ON); 0 Lux with IR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: IR-cut filter with auto switch (ICR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: Up to 30 meters (98.4 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB true WDR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Angle\u003c\/strong\u003e: Pan 0 to 360 degrees, Tilt 0 to 80 degrees, Rotate 0 to 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage\u003c\/strong\u003e: MicroSD up to 256 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: PoE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio\u003c\/strong\u003e: Built-in microphone\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3618sr3-adf28km-g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524564451634,"sku":"IPC3618SR3-ADF28KM-G","price":234.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a317607374777ec66df49ad2c8af9e0b_3002ecf6-ac79-4cba-adbe-f5c4851601b3.png?v=1785451854"},{"product_id":"uniview-ipc3615se-adf28km-wl-i0-5mp-turret-network-camera","title":"Uniview ipc3615se-adf28km-wl-i0 5MP Turret Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc3615se-adf28km-wl-i0 is a 5MP fixed warm light turret network camera built for continuous, full-color surveillance. It uses a 1\/2.7-inch CMOS sensor to deliver up to 2880x1620 resolution at 30 frames per second and supports multiple compression formats including Ultra 265, H.265, H.264, and MJPEG. ColorHunter technology maintains full-color imaging around the clock without switching to black-and-white in low light. With 120 dB true Wide Dynamic Range (WDR), the camera handles high-contrast scenes such as direct sunlight and deep shadow in the same frame. Installed by security integrators and commercial facility technicians, this unit fits both new builds and retrofit deployments.\u003c\/p\u003e\u003cp\u003eThis camera is suited for perimeter protection in commercial and institutional settings where accurate event detection is required. Intelligent intrusion detection features include cross-line, intrusion, enter area, and leave area detection. Target classification filters out false alarms triggered by leaves, birds, and lighting changes, focusing alerts on humans, motor vehicles, and non-motor vehicles. People flow counting and crowd density monitoring make it appropriate for retail, transit, and public space applications. A built-in microphone and MicroSD card slot supporting up to 512 GB provide onboard audio capture and local storage without additional hardware.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5MP resolution at 2880x1620 at 30\/25 fps with 1\/2.7-inch CMOS sensor\u003c\/li\u003e\n\u003cli\u003eColorHunter technology delivers 24-hour full-color imaging using built-in warm light\u003c\/li\u003e\n\u003cli\u003e120 dB true WDR for clear imaging in high-contrast lighting conditions\u003c\/li\u003e\n\u003cli\u003eIntelligent perimeter protection with human, motor vehicle, and non-motor vehicle classification\u003c\/li\u003e\n\u003cli\u003eBuilt-in microphone and MicroSD slot supporting up to 512 GB local storage\u003c\/li\u003e\n\u003cli\u003eIP67-rated weatherproof housing suitable for outdoor installation\u003c\/li\u003e\n\u003cli\u003eSupports 9:16 corridor mode for stairwells, hallways, and narrow passages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style network camera compatible with ONVIF-compliant video management systems and NVR platforms that support Ultra 265, H.265, or H.264 streams.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified low-voltage security technician familiar with IP camera deployment and network configuration. Power down the network switch port or PoE injector before making wiring connections. Mount the camera to a structurally sound surface using the appropriate hardware for the substrate. Verify local electrical and building codes before routing cable through walls or ceilings.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Resolution\u003c\/strong\u003e: 5 MP (2880 x 1620)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: 30\/25 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Illumination\u003c\/strong\u003e: Color: 0.001 Lux (F1.0, AGC ON)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e: Greater than 56 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment Angle\u003c\/strong\u003e: Pan: 3 degrees to 360 degrees, Tilt: 0 degrees to 80 degrees, Rotate: 3 degrees to 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal Storage\u003c\/strong\u003e: MicroSD, up to 512 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio\u003c\/strong\u003e: Built-in microphone\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3615se-adf28km-wl-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524612620594,"sku":"IPC3615SE-ADF28KM-WL-I0","price":203.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4aa1a02840c51811e569ce9c865d4786.png?v=1785453102"},{"product_id":"uniview-nsw2010-24t2gc-poe-in-24-port-poe-network-switch","title":"Uniview nsw2010-24t2gc-poe-in 24-port Poe Network Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW nsw2010-24t2gc-poe-in is a 24-port 10\/100Mbps PoE network switch designed for IP surveillance and business network deployments. It delivers up to 390W of total PoE power across 24 RJ45 downlink ports, supporting IEEE 802.3af and IEEE 802.3at standards. Two combo 1000Mbps uplink ports provide flexible fiber or copper connectivity. With a switching capacity of 8.8 Gbps and a forwarding rate of 6.55 Mpps, the switch handles high-bandwidth video and data traffic without bottlenecking. The all-metal housing and dual cooling fans make it suitable for rack-mounted deployments in commercial and light-industrial environments. Installation and configuration are handled by licensed network technicians or security integrators.\u003c\/p\u003e\u003cp\u003eThis switch is engineered for IP camera networks, small-to-medium business LANs, and surveillance systems requiring extended PoE range. The Surveillance mode extends PoE transmission distance up to 250 meters, which is critical for cameras mounted at long cable runs from the IDF or head-end rack. Secure mode isolates downlink ports so they communicate only with uplink ports, reducing lateral network exposure between connected devices. Normal mode allows full port-to-port communication for standard LAN use. These three selectable working modes make the switch adaptable to varying deployment requirements without additional managed switch complexity.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e24 x 10\/100Mbps PoE RJ45 ports with IEEE 802.3af and IEEE 802.3at support\u003c\/li\u003e\n\u003cli\u003e2 x 1000Mbps Combo uplink ports for fiber or copper connectivity\u003c\/li\u003e\n\u003cli\u003eUp to 390W total PoE power budget across all ports\u003c\/li\u003e\n\u003cli\u003eSurveillance mode extends PoE transmission distance up to 250 meters\u003c\/li\u003e\n\u003cli\u003eSecure mode restricts downlink port communication to uplink ports only\u003c\/li\u003e\n\u003cli\u003e8.8 Gbps switching capacity with 4 Mbit packet buffer\u003c\/li\u003e\n\u003cli\u003eAll-metal housing with dual cooling fans for reliable continuous operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-install switch for IP camera networks and structured cabling environments supporting IEEE 802.3af and IEEE 802.3at powered devices.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified network technician or licensed low-voltage contractor. Power down all connected devices before servicing the switch or making port changes. Mount in a standard 19-inch rack enclosure and ensure adequate airflow around the unit per the manufacturer guidelines. Verify total connected PoE load does not exceed the rated power budget before energizing the switch.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts\u003c\/strong\u003e: 24 x 100Mbps PoE (RJ45) plus 2 x 1000Mbps Combo uplink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Standards\u003c\/strong\u003e: IEEE 802.3af, IEEE 802.3at\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Standards\u003c\/strong\u003e: IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching Capacity\u003c\/strong\u003e: 8.8 Gbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForwarding Performance\u003c\/strong\u003e: 6.55 Mpps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacket Buffer\u003c\/strong\u003e: 4 Mbit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAC Address Table\u003c\/strong\u003e: 16K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PoE Power\u003c\/strong\u003e: 390W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Fans\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMTBF\u003c\/strong\u003e: greater than 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x D x H)\u003c\/strong\u003e: 17.3 inches x 8.1 inches x 1.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: less than 9.26 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e: 10% to 90% non-condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material\u003c\/strong\u003e: All metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw2010-24t2gc-poe-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524626448690,"sku":"NSW2010-24T2GC-POE-IN","price":302.63,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/04ef1f84d2e5dcdc9355acd8691bf046.jpg?v=1785453411"},{"product_id":"uniview-nvr502-08b-p8-8ch-poe-nvr-320mbps-ultra265","title":"Uniview nvr502-08b-p8 8ch Poe Nvr 320mbps Ultra265","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW nvr502-08b-p8 is a professional 8-channel IP Network Video Recorder built for demanding surveillance installations. Part of the 502 Series, it delivers 320 Mbps inbound bandwidth and 160 Mbps outbound, supporting high-resolution camera streams without bottlenecks. The recorder uses Ultra265 compression, which combines U-Code and H.265 encoding to reduce storage consumption by 75 percent or more compared to standard H.264 while maintaining image quality. A built-in 8-port PoE switch powers cameras directly from the unit, eliminating the need for a separate PoE switch. Licensed CCTV installers and security integrators are the primary installers of this unit.\u003c\/p\u003e\u003cp\u003eThe nvr502-08b-p8 is suited for commercial and mid-size residential IP camera systems requiring high throughput and flexible storage. It accepts cameras up to 16 MP resolution, making it compatible with 4K and multi-megapixel IP camera deployments. Two internal SATA drive bays each support up to 10 TB, providing up to 20 TB of total onboard storage capacity. ONVIF compliance with profiles S, G, and T allows integration with third-party IP cameras beyond the UNIVIEW product line, giving installers flexibility when specifying camera hardware.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8-channel built-in PoE switch — no external PoE switch required\u003c\/li\u003e\n\u003cli\u003e320 Mbps inbound and 160 Mbps outbound bandwidth for high-resolution multi-stream recording\u003c\/li\u003e\n\u003cli\u003eUltra265 compression reduces storage requirements by 75 percent or more versus H.264\u003c\/li\u003e\n\u003cli\u003eSupports IP cameras up to 16 MP resolution\u003c\/li\u003e\n\u003cli\u003eDual SATA drive bays supporting up to 10 TB each (20 TB total)\u003c\/li\u003e\n\u003cli\u003eONVIF compliant with profiles S, G, and T for third-party camera integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eONVIF-compliant with profiles S, G, and T, supporting UNIVIEW IP cameras as well as third-party cameras meeting those ONVIF profile standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed low-voltage or security systems technician familiar with IP network infrastructure. Power down the unit before installing or removing SATA drives, and follow the drive manufacturer torque guidelines for mounting hardware. Ensure the network switch feeding the NVR provides adequate bandwidth to support all active camera streams. Consult local codes regarding surveillance system placement, data retention requirements, and conduit routing for camera cabling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInbound Bandwidth\u003c\/strong\u003e: 320 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutbound Bandwidth\u003c\/strong\u003e: 160 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Camera Resolution\u003c\/strong\u003e: 16 MP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In PoE Ports\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSATA Drive Bays\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Storage Per Drive\u003c\/strong\u003e: 10 TB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Total Storage\u003c\/strong\u003e: 20 TB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra265, H.265, H.264\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eONVIF Profiles\u003c\/strong\u003e: S, G, T\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nvr502-08b-p8\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524653678898,"sku":"NVR502-08B-P8","price":508.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d5e7e6319b2d08702b25836c3abaf1e5.jpg?v=1785454204"},{"product_id":"uniview-ipc328sr3-adf40km-g-8mp-dome-ip-camera-4mm-poe","title":"Uniview ipc328sr3-adf40km-g 8MP Dome Ip Camera 4mm Poe","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc328sr3-adf40km-g is an 8-megapixel fixed-lens dome IP security camera built for installations that demand clear imaging in challenging light conditions. Equipped with a 1\/2.7-inch CMOS sensor and LightHunter low-light technology, it delivers usable footage where standard cameras fall short. The camera supports multiple resolution modes including 3840x2160 at 20fps and 5MP at 30fps, and encodes in Ultra 265, H.265, H.264, or MJPEG to accommodate a wide range of NVR platforms. A licensed electrician or low-voltage security technician handles the PoE installation, which simplifies cable runs to a single Cat5e or Cat6 line.\u003c\/p\u003e\u003cp\u003eThis dome camera fits commercial and residential security deployments where vandal resistance and weatherproofing are required. The IK10-rated dome housing withstands physical impact, and the IP67 rating seals the unit against dust ingress and sustained water exposure. The 4mm fixed focal length suits entry points, corridors, and general area surveillance in spaces with moderate to wide fields of view. The built-in microphone captures on-site audio without requiring a separate device. Corridor Mode (9:16 aspect ratio) makes the camera a practical choice for hallways, stairwells, and narrow outdoor paths.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8MP 3840x2160 resolution at 20fps with 1\/2.7-inch CMOS sensor\u003c\/li\u003e\n\u003cli\u003eLightHunter technology for high-quality imaging in low-illumination environments\u003c\/li\u003e\n\u003cli\u003e120dB true Wide Dynamic Range for clear imaging in high-contrast lighting\u003c\/li\u003e\n\u003cli\u003eSmart IR with up to 30 meters (98 feet) of effective IR distance\u003c\/li\u003e\n\u003cli\u003eIK10 vandal-resistant, IP67-rated housing for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003eBuilt-in microphone and 9:16 Corridor Mode support\u003c\/li\u003e\n\u003cli\u003eSupports up to 256 GB Micro SD card for local edge recording\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and standard addition for PoE-based IP surveillance systems accepting Ultra 265, H.265, or H.264 video streams.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified low-voltage technician or licensed electrician in accordance with local codes and NEC Article 725 for low-voltage wiring. Power down the NVR or PoE switch port before connecting or disconnecting the camera. Mount the dome to a solid junction box or ceiling surface using the provided hardware, and verify the 3-axis adjustment is locked before finalizing the enclosure. Do not expose the lens or sensor to direct, sustained sunlight during installation, as this can damage the image sensor.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 8MP (3840x2160) at 20fps; 5MP (3072x1728) at 30\/25fps; 4MP (2560x1440) at 30\/25fps; 2MP (1920x1080) at 30\/25fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.7-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocal Length\u003c\/strong\u003e: 4mm fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: Up to 30 meters (98 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Dynamic Range\u003c\/strong\u003e: 120dB true WDR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: PoE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Rating\u003c\/strong\u003e: IK10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal Storage\u003c\/strong\u003e: Micro SD up to 256 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio\u003c\/strong\u003e: Built-in microphone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: 3-Axis adjustable dome\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorridor Mode\u003c\/strong\u003e: 9:16 supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc328sr3-adf40km-g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524674224434,"sku":"IPC328SR3-ADF40KM-G","price":177.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e14a4602e7e63d6ec8c1d11b036a3a5b.jpg?v=1785454859"},{"product_id":"uniview-ipc3618sr3-dpf28lm-f-8mp-turret-ip-camera-2-8mm","title":"Uniview ipc3618sr3-dpf28lm-f 8MP Turret Ip Camera 2.8mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc3618sr3-dpf28lm-f is an 8-megapixel IP turret camera designed for professional security installations in commercial, residential, and industrial environments. It captures video at up to 3840 x 2160 resolution through a 2.8 mm fixed lens, delivering a wide field of view and fine image detail. Built-in infrared LEDs provide reliable night vision, maintaining clear image quality in low-light conditions or complete darkness. The weather-resistant housing supports continuous indoor and outdoor deployment. Licensed security contractors and low-voltage installers are the primary trades who specify and mount this camera.\u003c\/p\u003e\u003cp\u003eThis camera is suited for applications requiring high-resolution, around-the-clock surveillance coverage. The 2.8 mm fixed lens makes it a practical choice for wide-area monitoring in lobbies, parking areas, retail floors, warehouses, and building perimeters. It integrates into standard IP video systems and supports efficient compression protocols for recording and live streaming across networked video recorder setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8MP sensor captures video at up to 3840 x 2160 resolution\u003c\/li\u003e\n\u003cli\u003e2.8 mm fixed lens provides a wide field of view for broad area coverage\u003c\/li\u003e\n\u003cli\u003eBuilt-in infrared LEDs enable night vision in low-light and zero-light conditions\u003c\/li\u003e\n\u003cli\u003eWeather-resistant housing supports both indoor and outdoor installation\u003c\/li\u003e\n\u003cli\u003eStandard network interface integrates with IP video management systems\u003c\/li\u003e\n\u003cli\u003eEfficient video compression reduces storage and bandwidth requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard IP video surveillance systems and network video recorders that support high-resolution IP camera inputs.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed low-voltage contractor or qualified security systems integrator familiar with IP camera commissioning. Power down or disconnect the network switch port before wiring the camera connection. Follow local low-voltage wiring codes and confirm the network infrastructure supports the camera resolution and compression requirements before finalizing placement. Do not defeat the weatherproof gasket or cable seal on outdoor installations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 3840 x 2160 (8MP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e: 2.8 mm fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNight Vision\u003c\/strong\u003e: Built-in infrared LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Type\u003c\/strong\u003e: Turret\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Environment\u003c\/strong\u003e: Indoor and outdoor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3618sr3-dpf28lm-f\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524676452658,"sku":"IPC3618SR3-DPF28LM-F","price":184.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76f9b1f8eb41082d18ee8e6675368f9c.jpg?v=1785454940"},{"product_id":"uniview-ipc324er3-dvpf28-black-4mp-fixed-dome-ip-camera","title":"Uniview ipc324er3-dvpf28-black 4MP Fixed Dome Ip Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc324er3-dvpf28-black is a 4-megapixel fixed dome IP camera designed for outdoor surveillance installations. Built around a 2.8mm fixed lens, it delivers wide-angle coverage with integrated infrared illumination for day and night operation. The camera supports dual streaming, allowing simultaneous high-resolution recording and lower-bandwidth live viewing. Digital wide dynamic range helps maintain image clarity in scenes with mixed lighting. Power over Ethernet (PoE) eliminates the need for a separate power run, simplifying cable management at the install point. Licensed security integrators and low-voltage technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for outdoor perimeter and entry-point coverage on both residential and light commercial properties. The fixed 2.8mm lens provides a wide field of view appropriate for monitoring doorways, parking areas, and building exteriors. The compact dome form factor mounts to ceilings or soffits and blends into most architectural environments. Its weatherproof and impact-resistant housing makes it a practical choice for exposed mounting locations subject to weather exposure or vandal risk.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4-megapixel resolution for high-detail image capture\u003c\/li\u003e\n  \u003cli\u003e2.8mm fixed lens with infrared illumination for 24-hour operation\u003c\/li\u003e\n  \u003cli\u003eDual streaming supports simultaneous recording and live view\u003c\/li\u003e\n  \u003cli\u003ePower over Ethernet (PoE) for single-cable installation\u003c\/li\u003e\n  \u003cli\u003eIP66-rated housing for protection against dust and water ingress\u003c\/li\u003e\n  \u003cli\u003eIK10-rated housing for resistance to vandal impact\u003c\/li\u003e\n  \u003cli\u003e3-axis lens adjustment for precise aiming after mounting\u003c\/li\u003e\n  \u003cli\u003eDigital wide dynamic range for improved image quality in high-contrast scenes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style fixed dome IP camera for use with PoE-capable network video recorders and IP surveillance systems supporting standard ONVIF or RTSP protocols.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed low-voltage or security systems technician in accordance with local electrical codes. Power down the network switch port or PoE injector before making or breaking the Ethernet connection at the camera. Mount the housing securely to a structural surface before finalizing 3-axis lens position to ensure the aimed field of view is locked in without play. Verify the IP66 cable entry seal is properly dressed to maintain the housing weatherproof rating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 4 megapixel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e: 2.8mm fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Night Vision\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDynamic Range\u003c\/strong\u003e: Digital wide dynamic range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStreaming\u003c\/strong\u003e: Dual stream\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: Power over Ethernet (PoE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeatherproof Rating\u003c\/strong\u003e: IP66\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact Rating\u003c\/strong\u003e: IK10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLens Adjustment\u003c\/strong\u003e: 3-axis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing Color\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc324er3-dvpf28-black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524717805874,"sku":"IPC324ER3-DVPF28-BLACK","price":121.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/edd01f205b2cbffe6c205b537a1d1556.jpg?v=1785456255"},{"product_id":"uniview-nsw2020-24t1gtgc-poe-in-24-port-poe-switch-370w","title":"Uniview nsw2020-24t1gtgc-poe-in 24-port Poe Switch 370W","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW nsw2020-24t1gtgc-poe-in is a 24-port managed PoE network switch designed for IP surveillance and security system deployments. It delivers up to 370 watts of total PoE power across 24 x 10\/100 Mbps access ports, allowing direct power and data delivery to IP cameras, access control panels, and other PoE-enabled devices. Two Gigabit Ethernet uplink ports provide high-speed connectivity to upstream network infrastructure. This switch is a core component in structured cabling and IP security installations handled by low-voltage technicians and network integrators.\u003c\/p\u003e\n\u003cp\u003eThis switch is suited for commercial and residential IP camera systems where centralized PoE distribution is required. Its 24 access ports support simultaneous connection of multiple IP cameras or access control devices without the need for separate power supplies at each endpoint. The two GE uplink ports allow integration into larger network infrastructure or connection to a core switch or router. Typical installations include office buildings, retail environments, warehouses, and multi-unit residential properties.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e24 x 10\/100 Mbps PoE-enabled ports for IP cameras and network devices\u003c\/li\u003e\n  \u003cli\u003e370W total PoE power budget to support high-density camera deployments\u003c\/li\u003e\n  \u003cli\u003e2 x Gigabit Ethernet uplink ports for backbone connectivity\u003c\/li\u003e\n  \u003cli\u003eCompact form factor suited for rack or cabinet installation in IDF closets\u003c\/li\u003e\n  \u003cli\u003eEliminates the need for local power adapters at each connected device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style PoE network switch for use with IEEE 802.3af and 802.3at compatible IP cameras, access control devices, and other PoE-powered network equipment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed low-voltage or network technician familiar with structured cabling standards and local electrical codes. Power down the switch before making or changing wiring connections. Mount in a ventilated rack or enclosure to prevent thermal buildup. Verify that the total connected PoE load does not exceed the 370W power budget before commissioning the system.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoE Access Ports\u003c\/strong\u003e: 24 x 10\/100 Mbps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUplink Ports\u003c\/strong\u003e: 2 x Gigabit Ethernet (GE)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal PoE Power Budget\u003c\/strong\u003e: 370 watts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw2020-24t1gtgc-poe-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524791730482,"sku":"NSW2020-24T1GTGC-POE-IN","price":307.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fefe9c89bf95ab078909a60d8f52c766.jpg?v=1785457661"},{"product_id":"uniview-tr-wm03-b-in-wall-mounting-bracket-hemisphere-camera","title":"Uniview tr-wm03-b-in Wall Mounting Bracket Hemisphere Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW tr-wm03-b-in is a wall mounting assembly bracket designed for 3 inch hemisphere security cameras. Built from aluminum alloy, this bracket provides a rigid, corrosion-resistant mounting surface for dome-style surveillance cameras in both indoor installation scenarios. Measuring 7.5 inches by 5.0 inches by 5.0 inches and weighing 1.1 pounds, the bracket is compact enough for tight wall locations while offering the structural support required for fixed camera installations. Security installers and low-voltage technicians use this bracket when a direct ceiling or surface mount is not practical and a wall-offset position is needed.\u003c\/p\u003e\u003cp\u003eThis bracket is intended for wall installation of Uniview IPC32X and IPC361X series hemisphere cameras. It suits commercial and residential surveillance deployments where cameras must be positioned on vertical wall surfaces rather than overhead. The aluminum alloy construction makes it suitable for interior environments where a lightweight but durable mounting solution is required. Installers working on structured cabling or IP camera projects will find this bracket fits standard camera assembly workflows.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminum alloy construction for lightweight durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCompact footprint at 7.5 inches by 5.0 inches by 5.0 inches fits confined mounting locations\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for wall installation of 3 inch hemisphere cameras\u003c\/li\u003e\n\u003cli\u003eCompatible with IPC32X and IPC361X series Uniview cameras\u003c\/li\u003e\n\u003cli\u003eLow overall weight of 1.1 pounds simplifies single-technician installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for wall installation with Uniview IPC32X and IPC361X series 3 inch hemisphere cameras.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified low-voltage or security systems technician familiar with structured cabling and IP camera mounting practices. Power down the camera and disconnect all cabling before attaching or repositioning the bracket. Secure the bracket to structural wall material using fasteners appropriate for the wall substrate, and verify the mount is level before finalizing camera attachment. Follow all applicable local building and low-voltage wiring codes during installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Wall installation for IPC32X and IPC361X series hemisphere cameras\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 7.5 inches x 5.0 inches x 5.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 1.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-wm03-b-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524797399346,"sku":"TR-WM03-B-IN","price":37.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b51cb3c50315945d542a6c650f3ad175.png?v=1785457863"},{"product_id":"uniview-tr-jb03-g-in-junction-box-mini-fixed-dome","title":"Uniview tr-jb03-g-in Junction Box Mini Fixed Dome","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-jb03-g-in is a dedicated junction box designed for use with mini fixed dome security cameras. It provides a clean, code-compliant wiring enclosure that mounts behind the camera dome, routing cables from the rear of the installation point. Constructed from aluminum alloy, the box measures 108.6 mm (approximately 4.3 inches) in diameter and 38.5 mm (approximately 1.5 inches) in depth. It weighs 0.44 pounds. Security system installers and low-voltage technicians use this bracket to satisfy rough-in wiring requirements and protect cable terminations from the elements and physical damage.\u003c\/p\u003e\n\u003cp\u003eThis junction box is intended for flush or surface-mount installations where rear-entry wiring is required. It is suited for both commercial and residential surveillance deployments using compatible mini fixed dome cameras. The recessed design keeps cabling concealed within the wall or ceiling structure, resulting in a cleaner finished installation. It pairs with IPC32X Series fixed dome cameras and supports standard conduit or direct-wire rough-in configurations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRear wiring support for clean, concealed cable routing\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction for durability and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eCompact profile at 4.3 inches diameter by 1.5 inches depth\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.44 pounds for easy overhead or wall installation\u003c\/li\u003e\n  \u003cli\u003eDesigned as a purpose-built accessory for IPC32X Series fixed dome cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a junction box accessory for the UNIVIEW IPC32X Series fixed dome cameras, supporting rear-entry wiring configurations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage or security systems technician. Power down and de-energize all related camera circuits before beginning the rough-in process. Ensure the mounting surface is capable of supporting the camera and junction box assembly. Local codes and NEC guidelines should be followed for all wiring terminations and conduit connections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Junction box for IPC32X Series fixed dome cameras\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 4.3 inches diameter x 1.5 inches depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 0.44 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb03-g-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524825743666,"sku":"TR-JB03-G-IN","price":33.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a334b929120facc7ced5ef672f930665.png?v=1785458736"},{"product_id":"uniview-nsw2010-16t2gc-poe-in-16-port-poe-switch-250w","title":"Uniview nsw2010-16t2gc-poe-in 16 Port Poe Switch 250W","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW nsw2010-16t2gc-poe-in is a 16-port Power over Ethernet (PoE) network switch designed for structured cabling and IP device deployments. It delivers up to 250 watts of total PoE power budget across 16 x 10\/100 Mbps access ports, allowing connected devices such as IP cameras, access control readers, and VoIP endpoints to draw power and data over a single Cat5e or Cat6 cable run. Two dedicated uplink ports provide higher-speed connections to core or aggregation switches. Network technicians and low-voltage integrators are the primary installers of this switch in both new construction and retrofit applications.\u003c\/p\u003e\u003cp\u003eThis switch is suited for small to mid-size commercial or residential installations where centralized PoE power distribution is needed. Typical deployments include IP security camera systems, wireless access point networks, and access control installations. The 16-port access layer layout supports structured wiring closet or on-wall enclosure mounting. Its 250-watt power budget accommodates a mix of standard PoE and PoE+ devices without requiring a separate power injector at each drop.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e16 x 10\/100 Mbps PoE-enabled access ports for IP device connectivity\u003c\/li\u003e\n\u003cli\u003e250-watt total PoE power budget distributed across all access ports\u003c\/li\u003e\n\u003cli\u003e2 dedicated uplink ports for connection to core or distribution-layer switches\u003c\/li\u003e\n\u003cli\u003eSingle-unit PoE power distribution eliminates individual power injectors at each endpoint\u003c\/li\u003e\n\u003cli\u003eCompact form factor suitable for wiring closet or on-wall enclosure installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an access-layer PoE switch compatible with standard IEEE 802.3af and 802.3at powered devices including IP cameras, wireless access points, VoIP phones, and access control hardware.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified low-voltage technician or licensed network integrator familiar with structured cabling standards. Power down the switch before making or removing network connections during servicing. Verify that the total wattage draw of all connected PoE devices does not exceed the 250-watt power budget before commissioning. Installations should comply with applicable local electrical codes and TIA-568 cabling standards.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess Ports\u003c\/strong\u003e: 16 x 10\/100 Mbps PoE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUplink Ports\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal PoE Power Budget\u003c\/strong\u003e: 250 watts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw2010-16t2gc-poe-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524835541298,"sku":"NSW2010-16T2GC-POE-IN","price":218.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9793a2a6696184e22658ba461baa8c78.jpg?v=1785459063"},{"product_id":"uniview-tr-jb04-d-in-junction-box-fisheye-camera-mount","title":"Uniview tr-jb04-d-in Junction Box Fisheye Camera Mount","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-jb04-d-in is a wall-mount junction box designed for fisheye fixed dome cameras in professional surveillance installations. Constructed from aluminum alloy, it provides the structural rigidity needed to support secure camera mounting in both commercial and high-end residential environments. The rear cable entry keeps wiring concealed for a clean finished appearance. Security integrators and low-voltage technicians install this box where a tidy, durable mounting base is required for dome-style fisheye cameras.\u003c\/p\u003e\n\u003cp\u003eThis junction box is suited for wall-mounted surveillance deployments using 8 MP fisheye fixed dome cameras. It is appropriate for commercial facilities, retail environments, and residential installations where camera aesthetics and cable management are a priority. The rear cable routing design reduces exposed wiring runs and supports a professional finished look at the camera mounting location.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy construction for durability and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRear cable entry for clean, concealed wiring\u003c\/li\u003e\n  \u003cli\u003eDesigned for wall installation with secure mounting support\u003c\/li\u003e\n  \u003cli\u003eCompatible with 8 MP fisheye fixed dome camera form factor\u003c\/li\u003e\n  \u003cli\u003eSupports professional appearance in commercial and residential installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style mounting solution for UNIVIEW 8 MP fisheye fixed dome cameras requiring a wall-mount junction box.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage technician or security systems integrator. Power down the camera system and disconnect all cabling before beginning the mounting process. Route cables through the rear entry point of the junction box before securing the camera to avoid strain on connections. Follow local building codes and manufacturer torque guidelines when fastening to wall substrates.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Wall mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable Entry\u003c\/strong\u003e: Rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Camera Type\u003c\/strong\u003e: Fisheye fixed dome\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb04-d-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524852285746,"sku":"TR-JB04-D-IN","price":30.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/013e35a8ded80adfd6acce830d3743a7.jpg?v=1785459660"},{"product_id":"uniview-ipc6424sr-x25-vf-b-4mp-25x-ptz-ip-camera","title":"Uniview ipc6424sr-x25-vf-b 4MP 25X Ptz Ip Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc6424sr-x25-vf-b is a 4-megapixel pan-tilt-zoom network camera built for demanding surveillance installations in commercial and industrial environments. It uses a 1\/2.8-inch CMOS sensor to deliver 2688 x 1520 resolution at 30 frames per second. Compression support includes Ultra 265, H.265, H.264, and MJPEG, giving integrators flexibility in bandwidth and storage management. LightHunter technology maintains high image quality in low-light conditions without switching to black-and-white mode. A 25X optical zoom extends the field of view for wide-area monitoring. Licensed security integrators and commercial AV technicians are the primary installers of this unit.\u003c\/p\u003e\u003cp\u003eThis PTZ camera suits perimeter security, large parking areas, retail environments, and public spaces where wide-area coverage and zoom detail are both required. Smart intrusion prevention functions include cross-line detection, intrusion detection, enter-area detection, and leave-area detection, each with false alarm filtering built in. People counting and crowd density monitoring expand its use to retail analytics and venue management. The smart IR illuminator reaches distances up to 100 meters (328 feet), supporting nighttime operation without supplemental lighting. Face detection and best-snapshot auto-selection assist downstream analytics platforms.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4MP resolution at 2688 x 1520 at 30 fps via 1\/2.8-inch CMOS sensor\u003c\/li\u003e\n\u003cli\u003e25X optical zoom for extended-range identification\u003c\/li\u003e\n\u003cli\u003eLightHunter technology for ultra-high image quality in low illumination\u003c\/li\u003e\n\u003cli\u003eSmart IR illumination with up to 100-meter (328-foot) range\u003c\/li\u003e\n\u003cli\u003eSmart intrusion prevention with cross-line, intrusion, enter-area, and leave-area detection\u003c\/li\u003e\n\u003cli\u003ePeople counting and crowd density monitoring for analytics applications\u003c\/li\u003e\n\u003cli\u003eIP67 ingress protection and IK10 vandal-resistant rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for integration with standard ONVIF-compatible network video recorders and video management systems that support Ultra 265, H.265, or H.264 streams. Power can be supplied via DC 12 volts or PoE+ (IEEE 802.3at)-capable switches and injectors.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed security systems integrator or qualified low-voltage technician in accordance with applicable local electrical codes and the NEC. Power down the network switch port or disconnect the DC 12-volt supply before making wiring connections to the alarm I\/O or audio I\/O terminals. The camera must be mounted to a surface rated to support its load, and all outdoor cable entries should be sealed to maintain the IP67 ingress protection rating. Verify PoE+ budget on the switch port before connecting, as IEEE 802.3at requires a minimum port power budget of approximately 30 watts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 4MP (2688 x 1520)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: 30 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/2.8-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Zoom\u003c\/strong\u003e: 25X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: Up to 100 meters (328 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: DC 12 volts (plus or minus 25%), PoE+ IEEE 802.3at\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm I\/O\u003c\/strong\u003e: 2 in \/ 1 out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio I\/O\u003c\/strong\u003e: 1 in \/ 1 out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Protection\u003c\/strong\u003e: IK10 vandal resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc6424sr-x25-vf-b\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524856381746,"sku":"IPC6424SR-X25-VF-B","price":724.22,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e7b41382b6f42cdf7b173299f01f8ee1.png?v=1785459743"},{"product_id":"uniview-tr-wm03-d-in-wall-mounting-bracket-camera","title":"Uniview tr-wm03-d-in Wall Mounting Bracket Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-wm03-d-in is a wall mounting bracket designed for fixed dome, mini fixed dome, and plastic turret cameras. Cast construction provides a solid, stable foundation for camera positioning in indoor surveillance installations. This bracket attaches directly to a wall surface and serves as the primary mounting interface between the camera head and the mounting surface. Installation is typically handled by low-voltage security technicians or electricians during new construction or retrofit projects.\u003c\/p\u003e\n\u003cp\u003eThis bracket is suited for indoor security camera deployments in residential and commercial environments. It is designed to support 32 fixed dome cameras, mini fixed dome cameras, and plastic turret cameras in wall-mount configurations. Typical use cases include corridor mounting, perimeter coverage at interior walls, and any application where a ceiling mount is not practical or available.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCast construction for rigid, durable support of mounted camera hardware\u003c\/li\u003e\n  \u003cli\u003eCompatible with fixed dome, mini fixed dome, and plastic turret camera form factors\u003c\/li\u003e\n  \u003cli\u003eDesigned for indoor wall-surface installations\u003c\/li\u003e\n  \u003cli\u003eCompact footprint suitable for installations with limited wall clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style wall mounting bracket for UNIVIEW fixed dome, mini fixed dome, and plastic turret cameras requiring a wall-mount installation configuration.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified low-voltage technician or licensed electrician familiar with camera mounting hardware. Power down the camera system before attaching or detaching any camera from the bracket. Verify that the wall surface and fastener selection are appropriate for the combined load of the bracket and camera. Follow applicable local building and low-voltage wiring codes during installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 4.98 inches x 4.94 inches x 7.22 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Casting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Indoor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: Domestic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-wm03-d-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524922376498,"sku":"TR-WM03-D-IN","price":40.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/503efc4e38deb0a0248673cc2b7784d2.jpg?v=1785461760"},{"product_id":"uniview-tr-uc08-a-in-dome-corner-mounting-bracket","title":"Uniview tr-uc08-a-in Dome Corner Mounting Bracket","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-uc08-a-in is a steel dome corner mounting bracket engineered for PTZ dome camera installations in both indoor and outdoor environments. Measuring 8.5 inches by 8.3 inches by 4.8 inches and weighing 4.1 pounds, this bracket provides a rigid corner-mount solution where wall or ceiling mounts are not suitable. It is typically installed by security system technicians and low-voltage integrators working on surveillance projects that require a camera positioned at a structural corner.\u003c\/p\u003e\n\u003cp\u003eThis bracket is designed for PTZ dome camera installations at interior or exterior building corners. Its steel construction handles the load and vibration demands common in commercial and light industrial surveillance applications. When ceiling or wall mounting is not an option, corner mounting with this bracket allows optimal camera field-of-view coverage across two intersecting surfaces. It suits new installations and retrofit projects alike.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel construction for durability in indoor and outdoor corner-mount applications\u003c\/li\u003e\n  \u003cli\u003eSupports PTZ dome camera installations\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 8.5 inches by 8.3 inches by 4.8 inches\u003c\/li\u003e\n  \u003cli\u003eLightweight at 4.1 pounds for easier overhead installation\u003c\/li\u003e\n  \u003cli\u003eSuitable for both indoor and outdoor environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style corner mounting solution for PTZ dome cameras requiring a structural corner mount in indoor or outdoor installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed low-voltage technicians or security system integrators. Power to any associated camera or system should be disconnected before mounting hardware is installed. The bracket must be fastened to a structurally sound corner surface capable of supporting the combined weight of the bracket and camera. Follow local building codes and manufacturer guidelines for hardware selection and mounting depth.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Indoor or outdoor PTZ dome corner installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 8.5 inches x 8.3 inches x 4.8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 4.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-uc08-a-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524971594034,"sku":"TR-UC08-A-IN","price":30.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1e8f0a3b5c358335941ec6c508f0589d.png?v=1785462352"},{"product_id":"uniview-ipc3615sb-adf28km-i0-5mp-turret-camera-2-8mm","title":"Uniview ipc3615sb-adf28km-i0 5MP Turret Camera 2.8mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc3615sb-adf28km-i0 is a 5-megapixel IP turret camera built for both indoor and outdoor surveillance applications. It uses a high-sensitivity CMOS sensor to deliver a resolution of 2880 by 1620 pixels and incorporates starlight technology for detailed imaging in very low light conditions. The fixed 2.8mm lens provides a wide field of view suited for general area coverage. Wide dynamic range processing maintains visibility in scenes with mixed bright and dark zones. This camera is NDAA compliant, making it suitable for federally regulated or government-affiliated installations. Security integrators and low-voltage technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThe ipc3615sb-adf28km-i0 is designed for commercial, residential, and institutional surveillance deployments where reliable wide-angle coverage is required. Infrared illumination enables clear imaging in complete darkness. Intelligent video analytics including intrusion detection, line crossing detection, and motion detection support proactive monitoring workflows. The weather-resistant housing allows installation in harsh outdoor environments. Power is supported via Power over Ethernet or 12-volt DC input, simplifying cabling in most standard IP camera installations. Onboard storage capability provides local redundancy alongside network video recorder integration.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5MP resolution at 2880 by 1620 pixels for high-definition surveillance\u003c\/li\u003e\n  \u003cli\u003eStarlight technology delivers detailed images in near-zero light conditions\u003c\/li\u003e\n  \u003cli\u003eFixed 2.8mm lens provides wide-angle field of view for broad area coverage\u003c\/li\u003e\n  \u003cli\u003eWide dynamic range improves image clarity in high-contrast lighting scenes\u003c\/li\u003e\n  \u003cli\u003eBuilt-in infrared illumination supports imaging in complete darkness\u003c\/li\u003e\n  \u003cli\u003eIntelligent analytics: intrusion detection, line crossing, and motion detection\u003c\/li\u003e\n  \u003cli\u003eNDAA compliant for use in regulated or government-affiliated security projects\u003c\/li\u003e\n  \u003cli\u003eSupports Power over Ethernet and 12-volt DC input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style IP turret camera compatible with standard ONVIF-conformant network video recorder systems and PoE network infrastructure used in commercial and residential IP surveillance installations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed low-voltage or security systems technician familiar with IP camera infrastructure and local codes governing surveillance equipment. Power down or disconnect the PoE switch port or DC power supply before making wiring connections. Confirm network switch PoE output meets the camera power draw requirements before deployment. Mount the housing securely to a solid surface to minimize vibration that can degrade image stability.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 5MP (2880 x 1620)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e: Fixed 2.8mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Type\u003c\/strong\u003e: High-sensitivity CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow Light Technology\u003c\/strong\u003e: Starlight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInfrared Illumination\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: Power over Ethernet or 12 volts DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntelligent Analytics\u003c\/strong\u003e: Intrusion Detection, Line Crossing, Motion Detection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOnboard Storage\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e: Weather-resistant, outdoor-rated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e: NDAA Compliant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eForm Factor\u003c\/strong\u003e: Turret\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3615sb-adf28km-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51524996727090,"sku":"IPC3615SB-ADF28KM-I0","price":190.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4ca2b8aa19dffed149aa2e0391f74e43.jpg?v=1785462588"},{"product_id":"uniview-tr-a01-in-waterproof-cable-gland-npt-3-4-inch","title":"Uniview tr-a01-in Waterproof Cable Gland Npt 3\/4 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-a01-in is a waterproof cable gland designed to seal and protect cable entry points in surveillance and security camera installations. Threaded to NPT 3\/4 inch, it creates a weather-resistant seal where cables pass through junction boxes, camera housings, or mounting surfaces exposed to moisture. Constructed from plastic, it weighs just 0.05 pounds and measures 1.46 inches by 1.81 inches, making it a compact and lightweight fitting for tight installation spaces. Security installers and low-voltage technicians use this gland to prevent water intrusion at cable penetration points in outdoor and wet-location applications.\u003c\/p\u003e\n\u003cp\u003eThis cable gland is suited for outdoor security camera installations where cables must transition through a weather-exposed surface. It is commonly used with dome cameras, bullet cameras, and wall-mount junction boxes that require a sealed cable entry. Typical applications include residential and light commercial CCTV and IP camera systems where NPT 3\/4 inch fittings are standard for conduit or housing penetrations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNPT 3\/4 inch thread for standard conduit and housing compatibility\u003c\/li\u003e\n  \u003cli\u003eWaterproof construction protects cable entry points from moisture intrusion\u003c\/li\u003e\n  \u003cli\u003eLightweight plastic body at 0.05 pounds minimizes load on camera housings\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions of 1.46 inches by 1.81 inches fit tight mounting locations\u003c\/li\u003e\n  \u003cli\u003eDesigned for outdoor and wet-location security camera installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style cable gland for outdoor security camera housings and junction boxes requiring an NPT 3\/4 inch waterproof cable entry fitting.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a low-voltage technician or security systems installer. Power down the camera system and disconnect all cabling before servicing any junction box or housing. Hand-tighten the gland to the fitting surface and confirm a snug, gap-free seal before routing cable through. Follow local codes and the NEC for wet-location low-voltage wiring when routing cables through outdoor enclosures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: NPT 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 1.46 inches x 1.81 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-a01-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525045322034,"sku":"TR-A01-IN","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/68f4986b46e157f8160ad72f85a4fd04.jpg?v=1785463184"},{"product_id":"uniview-ipc94144sfw-x25-f40c-dual-channel-ptz-camera-25x","title":"Uniview ipc94144sfw-x25-f40c Dual-channel Ptz Camera 25X","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc94144sfw-x25-f40c is a dual-channel MultiView PTZ network camera that integrates a fixed panoramic sensor and a 25X optical zoom PTZ sensor into a single unit operating on one IP address. Channel 1 delivers a wide-angle panoramic view through a 4MP, 1\/1.8-inch CMOS sensor with a 4.0 mm fixed lens and a 94.9-degree horizontal field of view. Channel 2 provides a detailed close-up view through a 1\/2.7-inch CMOS sensor with a 4.8 to 120 mm varifocal lens and 25X optical zoom. Both channels share a 120 dB WDR rating and support IR-cut filter auto-switching. LightHunter technology enables color imaging down to 0.0005 Lux on Channel 1. Licensed security installers and network camera technicians are the primary installers of this unit.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for wide-area surveillance applications in commercial and public spaces where simultaneous panoramic coverage and detailed subject tracking are required. Channel 2 PTZ can be linked to Channel 1 smart intrusion prevention rules, allowing the PTZ to automatically track objects that trigger a cross-line, intrusion, enter-area, or leave-area detection event. People counting and crowd density monitoring functions make it applicable for retail, transit, and venue environments. The unit supports both IR and warm light illumination to handle low-light and full-color nighttime scenarios. Power is supplied via DC 12V or PoE+ (IEEE 802.3at).\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-channel integration: fixed panoramic lens plus 25X optical zoom PTZ on a single IP address\u003c\/li\u003e\n  \u003cli\u003eLightHunter technology with Channel 1 minimum illumination of 0.0005 Lux (F1.0, AGC ON)\u003c\/li\u003e\n  \u003cli\u003e120 dB WDR on both channels for high-contrast scene handling\u003c\/li\u003e\n  \u003cli\u003eSmart intrusion prevention with PTZ auto-tracking linked to fixed-channel detection rules\u003c\/li\u003e\n  \u003cli\u003ePeople counting and crowd density monitoring for retail, transit, and public venue deployments\u003c\/li\u003e\n  \u003cli\u003eSupports sound and light warning output; Alarm I\/O 2 in \/ 1 out, Audio I\/O 1 in \/ 1 out\u003c\/li\u003e\n  \u003cli\u003eCompression support: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for integration into IP video surveillance systems supporting Ultra 265, H.265, H.264, or MJPEG streams with PoE+ (IEEE 802.3at) infrastructure or DC 12V power supply.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis camera should be installed by a licensed security or low-voltage technician familiar with IP network camera commissioning. Confirm the PoE+ switch or injector meets IEEE 802.3at power requirements before connecting. Power down the network port and any local DC supply before making wiring connections to the alarm and audio terminals. Follow local low-voltage and data cabling codes applicable to the installation jurisdiction.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 1 Sensor\u003c\/strong\u003e: 1\/1.8-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 2 Sensor\u003c\/strong\u003e: 1\/2.7-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 1 Focal Length\u003c\/strong\u003e: 4.0 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 2 Focal Length\u003c\/strong\u003e: 4.8 to 120 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptical Zoom (Channel 2)\u003c\/strong\u003e: 25X\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 1 Horizontal Field of View\u003c\/strong\u003e: 94.9 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 2 Horizontal Field of View\u003c\/strong\u003e: 55.46 degrees to 3.09 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 1 Min. Illumination\u003c\/strong\u003e: Color 0.0005 Lux (F1.0, AGC ON); 0 Lux with IR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel 2 Min. Illumination\u003c\/strong\u003e: Color 0.003 Lux (F1.5, AGC ON); 0 Lux with IR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWDR\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eS\/N Ratio\u003c\/strong\u003e: greater than 56 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShutter\u003c\/strong\u003e: Auto\/Manual, 1 to 1\/100000 s\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDay\/Night\u003c\/strong\u003e: IR-cut filter with auto switch (ICR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: DC 12V; PoE+ (IEEE 802.3at)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlarm I\/O\u003c\/strong\u003e: 2 in \/ 1 out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio I\/O\u003c\/strong\u003e: 1 in \/ 1 out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc94144sfw-x25-f40c\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525064655154,"sku":"IPC94144SFW-X25-F40C","price":782.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d5806e88ef2d42d27ca2e241b8a95135.png?v=1785463585"},{"product_id":"uniview-tr-we45-in-ptz-dome-camera-wall-mount","title":"Uniview tr-we45-in Ptz Dome Camera Wall Mount","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-we45-in is an indoor\/outdoor wall mount bracket designed to support PTZ dome cameras in fixed surveillance installations. Built from aluminum, the mount provides a stable, corrosion-resistant platform suited for both interior and exterior deployment. It measures 9.1 x 5.6 x 7.9 inches, keeping a compact profile while delivering the structural support needed for PTZ dome camera operation. Security system installers and low-voltage technicians use this mount in commercial and residential applications where a wall-mounted PTZ position is required.\u003c\/p\u003e\n\u003cp\u003eThe tr-we45-in is intended for wall surface installation in locations where ceiling or pole mounting is not practical. Its aluminum construction holds up in outdoor environments exposed to moisture and temperature variation. The mount is sized to work within standard rough-in conditions and suits installations in building entryways, parking structures, warehouses, and similar monitored spaces where wide-angle PTZ coverage is needed.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum construction for lightweight strength and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRated for both indoor and outdoor use\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 9.1 x 5.6 x 7.9 inches\u003c\/li\u003e\n  \u003cli\u003eCompatible with select Uniview PTZ dome camera series\u003c\/li\u003e\n  \u003cli\u003eWall-mount design for flexible camera positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with select Uniview PTZ dome cameras including the IPC6222EI-X22UP-C and models in the IPC62xx and IPC63xx series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage or security systems technician. Before mounting, confirm the wall surface and anchor hardware are rated for the combined weight of the bracket and camera. Power down the camera system and disconnect all cabling before attaching or removing the mount. Follow local building codes and the camera manufacturer guidelines for conduit routing and weatherproofing at the cable entry point.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 9.1 x 5.6 x 7.9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Wall Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnvironment Rating\u003c\/strong\u003e: Indoor\/Outdoor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-we45-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525073469746,"sku":"TR-WE45-IN","price":40.44,"currency_code":"USD","in_stock":true}]},{"product_id":"uniview-mw3222-v-dt-22-inch-fhd-1080p-cctv-monitor","title":"Uniview mw3222-v-dt 22 Inch Fhd 1080p Cctv Monitor","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW mw3222-v-dt is a 22-inch full HD CCTV monitor built for professional security and surveillance installations. Running at 1080p resolution, it delivers a sharp, stable image suitable for continuous-duty monitoring environments. The display ships with HDMI and power cables included, along with a pedestal stand, making it ready for deployment on a desk or console without additional hardware. Security integrators, low-voltage technicians, and surveillance system installers are the typical tradespeople who spec and mount this unit.\u003c\/p\u003e\u003cp\u003eThis monitor is suited for commercial and light-industrial surveillance applications where a dedicated display is needed at a head-end, security desk, or control room. The 22-inch screen size gives operators a clear view of multi-camera feeds from a DVR or NVR. VESA 100x100mm mounting compatibility means the display can also be wall- or arm-mounted when a pedestal setup is not appropriate for the installation site.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e22-inch full HD panel at 1920x1080 resolution for clear surveillance image quality\u003c\/li\u003e\n\u003cli\u003eVESA 100x100mm mount pattern supports pedestal, wall mount, or monitor arm configurations\u003c\/li\u003e\n\u003cli\u003eIncludes HDMI cable, power cable, and pedestal stand — no additional accessories required for basic setup\u003c\/li\u003e\n\u003cli\u003eDedicated CCTV monitor design intended for continuous-duty security system use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or addition for professional CCTV and IP surveillance head-end stations accepting HDMI video input from DVR, NVR, or video management system outputs.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by a low-voltage security technician or systems integrator. Power down the recording device before connecting or disconnecting display cables to avoid signal issues. When wall- or arm-mounting, confirm the mounting bracket is rated for the display weight and follow the hardware manufacturer torque guidance for the VESA fasteners. Local electrical and low-voltage codes should be consulted for any permanent wiring runs associated with the installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Size\u003c\/strong\u003e: 22 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 1080p Full HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVESA Mount Pattern\u003c\/strong\u003e: 100x100mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Accessories\u003c\/strong\u003e: HDMI cable, power cable, pedestal stand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: mw3222-v-dt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525087461682,"sku":"MW3222-V-DT","price":136.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ca8cc7adaca954555781373e535959d9.webp?v=1785463978"},{"product_id":"uniview-tr-up08-a-in-pole-mount-adapter","title":"Uniview tr-up08-a-in Pole Mount Adapter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW tr-up08-a-in is a pole mount adapter designed to provide a secure vertical mounting solution for compatible surveillance or access-control devices. This adapter converts a pole-mounting configuration to accommodate wall-mount applications, giving installers flexibility when standard wall attachment is not available. It is typically installed by security and low-voltage technicians during camera or device deployment in commercial and residential settings.\u003c\/p\u003e\u003cp\u003eThis adapter suits installations where vertical poles serve as the primary structural support, such as parking lots, building perimeters, or utility areas. It bridges the gap between pole-mount and wall-mount hardware, making it a practical solution for repositioning or adapting existing mounting infrastructure without fabricating custom brackets.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConverts vertical pole mounting to wall-mount configuration\u003c\/li\u003e\n\u003cli\u003eProvides a stable, secure attachment point for compatible devices\u003c\/li\u003e\n\u003cli\u003eSuitable for both indoor and outdoor installation scenarios\u003c\/li\u003e\n\u003cli\u003eReduces the need for custom fabrication during camera or device deployment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style pole mount adapter for use with compatible UNIVIEW mounting systems and surveillance or access-control devices that accept standard pole or wall-mount hardware.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by licensed low-voltage or security technicians. Power down any connected devices before attaching or repositioning the mount. Verify that the mounting pole or structure meets load requirements for the device being supported. Follow applicable local codes and manufacturer guidelines for hardware torque and structural attachment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Pole to wall-mount adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrientation\u003c\/strong\u003e: Vertical pole mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-up08-a-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525123998002,"sku":"TR-UP08-A-IN","price":40.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8b5a320bf55547132570899654c033dd.png?v=1785465089"},{"product_id":"uniview-tr-up06-in-universal-pole-mounting-bracket","title":"Uniview tr-up06-in Universal Pole Mounting Bracket","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-up06-in is a universal pole mounting bracket designed for securing surveillance cameras and compatible devices to poles or rails in outdoor environments. Constructed from aluminum alloy, it offers a durable, corrosion-resistant platform suited for exposed installations. The bracket measures 5.4 inches x 5.0 inches x 2.5 inches and weighs 0.77 pounds, making it a lightweight yet solid mounting solution. Installation professionals working in security and low-voltage systems will find this bracket straightforward to deploy in a range of field conditions.\u003c\/p\u003e\n\u003cp\u003eThe tr-up06-in is intended for outdoor pole or rail mounting applications, such as perimeter security camera installations on light poles, fence rails, corner posts, or similar round and square structural members. Its compact footprint and universal design make it a practical choice for both new installations and retrofit projects where a reliable, weather-exposed mount is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy construction for lightweight durability in outdoor environments\u003c\/li\u003e\n  \u003cli\u003eCompact bracket dimensions of 5.4 inches x 5.0 inches x 2.5 inches for versatile fitment\u003c\/li\u003e\n  \u003cli\u003eLow profile weight of 0.77 pounds reduces load stress on mounting structures\u003c\/li\u003e\n  \u003cli\u003eRated for outdoor use including pole and rail mounting configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a universal outdoor pole and rail mounting bracket suitable for compatible surveillance cameras and devices requiring external structural mounting.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed low-voltage or security system technicians. Before mounting, ensure the pole or rail is structurally sound and rated to support the combined load of the bracket and attached device. Use appropriate hardware for the pole or rail material and diameter, and verify all fasteners are tightened securely before deploying the camera or device. Follow all applicable local codes and manufacturer guidelines for outdoor security equipment installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Outdoor, pole or rail installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 5.4 inches x 5.0 inches x 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 0.77 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Material\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-up06-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525196218674,"sku":"TR-UP06-IN","price":28.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a9e74e3d3a007c8cf0b43dc5ae28490.png?v=1785466885"},{"product_id":"uniview-ipc815sb-adf14k-i0-5mp-fisheye-network-camera","title":"Uniview ipc815sb-adf14k-i0 5MP Fisheye Network Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc815sb-adf14k-i0 is a 5-megapixel fixed IR fisheye network camera designed for indoor and outdoor IP surveillance installations. Built around a 1\/2.8-inch CMOS sensor, it delivers full 5 MP resolution at up to 30 frames per second with support for Ultra 265, H.265, H.264, and MJPEG compression formats. The 120 dB true wide dynamic range handles high-contrast lighting scenes without washing out detail. Licensed CCTV technicians and low-voltage security installers are the primary trades for this unit.\u003c\/p\u003e\u003cp\u003eThis camera is suited for wide-area coverage in commercial and residential applications where a single-lens fisheye view eliminates blind spots. The fixed-lens fisheye design makes it a practical choice for lobbies, retail floors, server rooms, and open warehouse spaces. Built-in dual microphones provide onboard audio capture, and the alarm I\/O configuration supports basic intrusion detection integration. Power is supplied over the network cable via PoE, simplifying cable runs and eliminating a separate power circuit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5 MP resolution at 2592 x 1944 pixels, up to 30\/25 fps\u003c\/li\u003e\n\u003cli\u003e1\/2.8-inch CMOS sensor with 120 dB true WDR for strong-light scenes\u003c\/li\u003e\n\u003cli\u003eUltra 265, H.265, H.264, and MJPEG compression support\u003c\/li\u003e\n\u003cli\u003eSmart IR illumination with up to 10 meters (32.8 feet) IR distance\u003c\/li\u003e\n\u003cli\u003eBuilt-in dual microphones with 1-in\/1-out audio I\/O and 1-in\/1-out alarm I\/O\u003c\/li\u003e\n\u003cli\u003eMicroSD card slot supporting up to 512 GB local storage\u003c\/li\u003e\n\u003cli\u003eIK10 vandal-resistant construction and IP66 weatherproof rating\u003c\/li\u003e\n\u003cli\u003ePoE power supply eliminates separate power wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style network camera compatible with standard ONVIF-compliant NVR systems and PoE network switches that supply 802.3af or 802.3at power.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed low-voltage or security systems technician in accordance with local electrical codes and NEC Article 725 for low-voltage wiring. Power down the PoE switch port before connecting or disconnecting the camera. Verify the mounting surface can support the camera and conduit entry requirements before drilling. Do not expose the unit to voltages outside its rated PoE input range.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 5 MP (2592 x 1944)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame Rate\u003c\/strong\u003e: 30\/25 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImage Sensor\u003c\/strong\u003e: 1\/2.8-inch CMOS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Dynamic Range\u003c\/strong\u003e: 120 dB true WDR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Distance\u003c\/strong\u003e: Up to 10 meters (32.8 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio I\/O\u003c\/strong\u003e: 1 in \/ 1 out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm I\/O\u003c\/strong\u003e: 1 in \/ 1 out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocal Storage\u003c\/strong\u003e: MicroSD, up to 512 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP66\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Resistance\u003c\/strong\u003e: IK10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: PoE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc815sb-adf14k-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525199626546,"sku":"IPC815SB-ADF14K-I0","price":392.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bcc30f63f817f1c89a56818d32ba366.png?v=1785466967"},{"product_id":"uniview-nsw2010-10t-poe-in-8-port-poe-network-switch","title":"Uniview nsw2010-10t-poe-in 8-port Poe Network Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW nsw2010-10t-poe-in is a 10-port unmanaged PoE network switch designed for IP surveillance and small business network deployments. It provides eight 100 Mbps PoE-capable RJ45 ports alongside two standard 100 Mbps uplink ports, delivering 2 Gbps switching capacity and 1.49 Mpps forwarding performance. The switch operates across three selectable working modes — Default, VLAN, and EXTEND — allowing installers to match network behavior to the deployment scenario. All-metal housing and fanless cooling make it suited for rack or surface mounting in equipment rooms or remote install points where quiet operation is required.\u003c\/p\u003e\u003cp\u003eThis switch is intended for use in residential and light commercial IP camera installations, access control networks, and small office environments. In EXTEND (Surveillance mode), the switch stretches PoE transmission distance up to 250 meters, reducing the need for additional infrastructure in large properties or perimeter coverage layouts. In VLAN (Secure mode), all downlink ports communicate only with the uplink ports, isolating connected devices from each other — a common requirement in multi-tenant or secured surveillance networks. Network and security technicians are the primary trade installing this device.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEight 100 Mbps PoE ports supporting IEEE 802.3af and IEEE 802.3at standards\u003c\/li\u003e\n\u003cli\u003eEXTEND mode enables PoE transmission up to 250 meters for long-run camera drops\u003c\/li\u003e\n\u003cli\u003eVLAN (Secure mode) isolates downlink ports, restricting communication to uplink ports only\u003c\/li\u003e\n\u003cli\u003eFanless design with all-metal housing for silent, reliable operation\u003c\/li\u003e\n\u003cli\u003e2 Gbps switching capacity with 1.49 Mpps forwarding performance\u003c\/li\u003e\n\u003cli\u003eMTBF rated at greater than 50,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-install switch compatible with IEEE 802.3af and IEEE 802.3at powered devices including IP cameras, VoIP phones, and access control readers operating at 100 Mbps.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by a licensed network technician or security systems integrator. Power down all connected PoE devices before swapping an existing switch to prevent surge damage to endpoints. Verify working mode selection matches the intended network topology before going live, as VLAN mode restricts inter-port communication by design. Follow local low-voltage wiring codes and structured cabling standards for all RJ45 terminations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Count\u003c\/strong\u003e: 10 total (8 PoE + 2 standard), 100 Mbps RJ45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching Capacity\u003c\/strong\u003e: 2 Gbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForwarding Performance\u003c\/strong\u003e: 1.49 Mpps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Standards\u003c\/strong\u003e: IEEE 802.3af, IEEE 802.3at\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Standards\u003c\/strong\u003e: IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMAC Address Table\u003c\/strong\u003e: 4K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacket Buffer\u003c\/strong\u003e: 1.625 Mbit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax PoE Transmission Distance\u003c\/strong\u003e: 250 meters (EXTEND mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x D x H)\u003c\/strong\u003e: 8.7 inches x 5.9 inches x 1.7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: Less than 2.69 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling\u003c\/strong\u003e: Fanless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing\u003c\/strong\u003e: All metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMTBF\u003c\/strong\u003e: Greater than 50,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e: 10% to 90% non-condensing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw2010-10t-poe-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525200380210,"sku":"NSW2010-10T-POE-IN","price":60.31,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/35b61cd0bebf190777c04a0149eb2aa9.png?v=1785466993"},{"product_id":"uniview-tr-jb07-wm03-f-in-outdoor-wall-mount-junction-box","title":"Uniview tr-jb07\/wm03-f-in Outdoor Wall Mount Junction Box","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-jb07\/wm03-f-in is an outdoor wall mount with integrated junction box designed for fixed motorized turret and fixed dome security cameras. Constructed from aluminum alloy, it provides a durable, weather-resistant mounting solution for exterior installations. Measuring 4.92 inches x 4.92 inches x 9.17 inches and weighing 2.16 pounds, the bracket integrates cable management through the built-in junction box, keeping wiring connections protected and concealed behind the mount. Security installers and low-voltage technicians use this bracket to achieve a clean, professional finish on outdoor camera deployments.\u003c\/p\u003e\n\u003cp\u003eThis wall mount is suited for outdoor use on building exteriors including commercial and residential structures. It is designed for use with the IPC363X and IPC36XXS\/E series fixed dome cameras and fixed motorized turret models from UNIVIEW. The junction box integrates directly into the mount, making it appropriate for installations where exposed conduit or surface wiring is not desirable. It attaches to standard masonry, wood-framed, or steel-stud exterior walls.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eIntegrated junction box protects and conceals wiring connections at the mount point\u003c\/li\u003e\n  \u003cli\u003eAluminum alloy construction for corrosion resistance in outdoor environments\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 4.92 inches x 4.92 inches x 9.17 inches\u003c\/li\u003e\n  \u003cli\u003eLightweight at 2.16 pounds for straightforward single-technician installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with IPC363X and IPC36XXS\/E series UNIVIEW fixed dome cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with UNIVIEW IPC363X and IPC36XXS\/E series fixed dome and fixed motorized turret cameras.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage or security systems technician. Before mounting, ensure power is disconnected from all associated camera and network equipment. Anchor the bracket securely to a structural surface using fasteners rated for the substrate material — concrete anchors for masonry, lag screws for wood framing. Route cabling through the junction box before securing the camera to the mount, and verify all weatherproof seals are intact after installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 4.92 inches x 4.92 inches x 9.17 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.16 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb07\/wm03-f-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525253398834,"sku":"TR-JB07\/WM03-F-IN","price":55.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9290d27935b4683283a7202f21d8e393.jpg?v=1785468520"},{"product_id":"uniview-ipc314sb-adf28k-i0-4mp-mini-dome-ip-camera","title":"Uniview ipc314sb-adf28k-i0 4MP Mini Dome Ip Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc314sb-adf28k-i0 is a 4-megapixel fixed mini dome IP camera built for professional security installations requiring reliable imaging across a wide range of lighting conditions. Featuring a 1\/3-inch CMOS sensor, it delivers 4MP resolution at up to 30 frames per second. LightHunter technology maximizes image clarity in low-light environments, while 120dB true wide dynamic range (WDR) handles high-contrast scenes with bright backgrounds. The built-in smart IR illuminator reaches up to 30 meters. Licensed security integrators and surveillance technicians are the primary installers for this unit.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for both indoor and outdoor applications in commercial and residential security systems. The fixed 2.8mm lens and compact mini dome form factor make it appropriate for ceiling-mounted coverage in lobbies, hallways, retail spaces, and perimeter installations. Support for 9:16 corridor mode makes it well-matched to narrow passage monitoring. Smart intrusion prevention analytics — including cross line, intrusion, enter area, and leave area detection — use target classification to focus alerts on humans, motor vehicles, and non-motor vehicles, reducing false triggers from environmental noise such as foliage, birds, and lighting changes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4MP 1\/3-inch CMOS sensor at up to 2688 x 1520 resolution, 30 fps\u003c\/li\u003e\n  \u003cli\u003eLightHunter technology for low-illumination high-quality imaging\u003c\/li\u003e\n  \u003cli\u003e120dB true WDR for clear imaging in strong backlight conditions\u003c\/li\u003e\n  \u003cli\u003eSmart IR illumination up to 30 meters (98 feet)\u003c\/li\u003e\n  \u003cli\u003eSmart intrusion prevention with human and vehicle target classification\u003c\/li\u003e\n  \u003cli\u003eIK10 vandal resistance and IP67 weatherproof rating\u003c\/li\u003e\n  \u003cli\u003eSupports Ultra 265, H.265, H.264, and MJPEG compression codecs\u003c\/li\u003e\n  \u003cli\u003eBuilt-in microphone and 9:16 corridor mode support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style network dome camera compatible with PoE-enabled NVR systems and network switches that supply IEEE 802.3af power over Ethernet. Supports Micro SD cards up to 256GB for onboard edge recording.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed security or low-voltage technician in accordance with local electrical codes. Power down the PoE switch port before making network cable connections. The 3-axis gimbal allows precise field-of-view adjustment after mounting — set the viewing angle before final tightening. Confirm IP67 gasket seating and conduit seal integrity on outdoor installations to maintain the weatherproof rating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 4MP (2688 x 1520) at 30\/25 fps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor\u003c\/strong\u003e: 1\/3-inch CMOS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIR Range\u003c\/strong\u003e: Up to 30 meters (98 feet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Dynamic Range\u003c\/strong\u003e: 120dB true WDR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264, MJPEG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: PoE (Power over Ethernet)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOnboard Storage\u003c\/strong\u003e: Micro SD up to 256GB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact Resistance\u003c\/strong\u003e: IK10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: 3-Axis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAudio\u003c\/strong\u003e: Built-in microphone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc314sb-adf28k-i0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525271191858,"sku":"IPC314SB-ADF28K-I0","price":215.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/128bd0ce3ab51e4ec35536e209c8a139.jpg?v=1785469087"},{"product_id":"uniview-ipc324sr3-dsf40km-g-4mp-fixed-dome-ip-camera","title":"Uniview ipc324sr3-dsf40km-g 4MP Fixed Dome Ip Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW ipc324sr3-dsf40km-g is a 4MP fixed dome IP camera designed for outdoor surveillance installations. It captures video at 2688 x 1520 resolution through a 4mm fixed lens, delivering wide-angle coverage across the field of view. LightHunter low-light technology and a true 120 dB wide dynamic range allow the camera to produce clear, detailed images in high-contrast and low-light conditions. Smart IR night vision extends visibility up to 98 feet. The camera supports Ultra 265, H.265, and H.264 compression to reduce bandwidth consumption and storage requirements. Licensed security integrators and surveillance technicians are the primary installers for this unit.\u003c\/p\u003e\n\u003cp\u003eThis camera is suited for outdoor perimeter and entrance monitoring in residential and commercial applications. The fixed 4mm lens provides a wide field of view appropriate for general-area coverage such as parking lots, building exteriors, and access points. It accepts power via PoE or 12V DC, which simplifies cabling in locations where a single Cat5e or Cat6 run handles both power and data. The metal housing and sealed construction make it appropriate for year-round outdoor deployment in environments exposed to weather, dust, or physical contact.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4MP resolution at 2688 x 1520 for high-detail video capture\u003c\/li\u003e\n  \u003cli\u003eLightHunter low-light technology for clear imaging in reduced-light conditions\u003c\/li\u003e\n  \u003cli\u003eTrue 120 dB wide dynamic range handles high-contrast lighting scenes\u003c\/li\u003e\n  \u003cli\u003eSmart IR night vision up to 98 feet\u003c\/li\u003e\n  \u003cli\u003eUltra 265, H.265, and H.264 compression reduces bandwidth and storage load\u003c\/li\u003e\n  \u003cli\u003eIP67 weatherproof and IK10 vandal-resistant metal enclosure\u003c\/li\u003e\n  \u003cli\u003eFlexible power input via PoE or 12V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style fixed dome IP camera for use with standard ONVIF-compatible network video recorders and IP surveillance systems that support PoE or 12V DC-powered cameras.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed security or low-voltage technician familiar with IP camera systems. Power down the network switch port or disconnect the DC power supply before making or changing wiring connections. Use Cat5e or Cat6 cabling for PoE runs and follow local low-voltage wiring codes. Ensure the mounting surface can support the fixture and that all conduit or cable penetrations are sealed to maintain the IP67 weather rating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 4MP (2688 x 1520)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLens\u003c\/strong\u003e: 4mm fixed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Dynamic Range\u003c\/strong\u003e: 120 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNight Vision Range\u003c\/strong\u003e: 98 feet (Smart IR)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVideo Compression\u003c\/strong\u003e: Ultra 265, H.265, H.264\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Input\u003c\/strong\u003e: PoE or 12V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection\u003c\/strong\u003e: IP67\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpact Rating\u003c\/strong\u003e: IK10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure Material\u003c\/strong\u003e: Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstall Location\u003c\/strong\u003e: Outdoor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc324sr3-dsf40km-g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525296226610,"sku":"IPC324SR3-DSF40KM-G","price":125.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/413720f7296f196fd959e00e221f861c.jpg?v=1785469904"},{"product_id":"uniview-2150c0b1-rack-ears-8-16ch-nvr","title":"Uniview 2150c0b1 Rack Ears 8 16CH Nvr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW 2150c0b1 is a metal rack-mount ear kit designed to secure compatible network video recorders (NVRs) to standard server racks. The kit provides the hardware needed to convert a standalone NVR into a rack-mounted unit, keeping equipment organized in structured cabling and surveillance equipment enclosures. Fabricated from metal, the ears are built for the physical demands of a rack environment. Installation is straightforward and suits security integrators and IT technicians working in commercial and residential surveillance deployments.\u003c\/p\u003e\n\u003cp\u003eThis accessory is intended for use with 8-channel and 16-channel NVR installations where rack mounting is required. It is suited for network closets, server rooms, and security equipment racks where space management and cable organization are priorities. The part attaches directly to the NVR chassis to allow standard 19-inch rack rail mounting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMetal construction for durability in rack environments\u003c\/li\u003e\n  \u003cli\u003eDesigned to convert compatible NVRs from desktop to rack-mount configuration\u003c\/li\u003e\n  \u003cli\u003eSupports 8-channel and 16-channel NVR installations\u003c\/li\u003e\n  \u003cli\u003eLightweight at approximately 0.10 pounds\u003c\/li\u003e\n  \u003cli\u003eStraightforward bolt-on installation with no special tools required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style rack-mount accessory for compatible 8-channel and 16-channel UNIVIEW NVR units.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a security integrator or IT technician. Power down and disconnect all cables from the NVR before attaching the rack ears. Secure the ears to the NVR chassis using the provided fasteners, then mount the unit to the rack rails following the rack enclosure manufacturer guidelines. Verify that the rack has adequate clearance and airflow around the installed unit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.10 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2150c0b1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525310710066,"sku":"2150C0B1","price":15.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8b028eb119a7c95890589d7565fbbf63.jpg?v=1785470309"},{"product_id":"uniview-nsw2010-6t-poe-in-4-port-poe-network-switch","title":"Uniview nsw2010-6t-poe-in 4-port Poe Network Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW nsw2010-6t-poe-in is a compact unmanaged network switch designed for IP surveillance and low-voltage network installations. It provides four Power over Ethernet (PoE) ports for powering network devices such as IP cameras and access control equipment directly over a standard Ethernet cable, eliminating the need for separate power supplies. Two additional uplink ports allow integration into larger network infrastructure. This switch is typically installed by low-voltage technicians and security integrators working on IP camera systems and structured cabling projects.\u003c\/p\u003e\n\u003cp\u003eThe nsw2010-6t-poe-in fits residential and light commercial IP security deployments where a small-footprint PoE switch is needed at the edge of the network. Common install scenarios include camera closets, server rooms, and on-wall enclosures where a dedicated PoE source is required for a limited number of devices. The two uplink ports support connection to a core switch or router to extend network reach without additional hardware.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFour PoE-enabled ports supply power and data over a single Ethernet cable\u003c\/li\u003e\n  \u003cli\u003eTwo uplink ports for integration into existing network infrastructure\u003c\/li\u003e\n  \u003cli\u003eCompact form factor suited for edge deployments in surveillance and access control systems\u003c\/li\u003e\n  \u003cli\u003eEliminates the need for separate power injectors at each endpoint device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-install PoE switch for residential and light commercial IP network and surveillance systems requiring up to four PoE-powered endpoints.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage or network technician. Power down all connected devices before making or changing wiring connections. Ensure the switch is mounted in a location with adequate ventilation and is protected from moisture and direct exposure to the elements. Follow applicable NEC low-voltage wiring guidelines when routing Ethernet cabling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoE Ports\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUplink Ports\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal Ports\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: nsw2010-6t-poe-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525322080562,"sku":"NSW2010-6T-POE-IN","price":40.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3c864be0a14c765e7d04855844b38268.jpg?v=1785470534"},{"product_id":"uniview-tr-jb07-d-in-bullet-camera-junction-box","title":"Uniview tr-jb07-d-in Bullet Camera Junction Box","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe UNIVIEW tr-jb07-d-in is an aluminum alloy junction box designed for bullet-style IP cameras. It provides a weatherproof enclosure for cable terminations and routing, supporting installations where wiring enters from the rear of the mount. Built for both outdoor and indoor use, this box serves as a structural and cable management solution between the camera and the mounting surface. Security installers and low-voltage technicians use this box to keep wiring clean, protected, and code-compliant at the camera head. It measures 4.9 inches by 4.9 inches by 2.2 inches and weighs 1.65 pounds.\u003c\/p\u003e\n\u003cp\u003eThis junction box is intended for outdoor or indoor cable junction applications with compatible UNIVIEW IP camera series including IPC23XX, IPC222X, IPC74X, IPC252, and IPC26X models. It is well suited for commercial and residential surveillance installations where surface-mount or wall-mount camera setups require a discrete and secure cable entry point. The rear cable outlet supports wiring from behind, which keeps conduit and cable runs flush against the mounting surface and reduces exposure to the elements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum alloy construction for durability in outdoor environments\u003c\/li\u003e\n  \u003cli\u003eSupports rear cable entry for clean, concealed wiring runs\u003c\/li\u003e\n  \u003cli\u003eRated for both outdoor and indoor installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with multiple UNIVIEW IPC camera series\u003c\/li\u003e\n  \u003cli\u003eCompact profile at 4.9 inches by 4.9 inches by 2.2 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with UNIVIEW IPC23XX, IPC222X, IPC74X, IPC252, and IPC26X series bullet IP cameras as an outdoor or indoor cable junction box with rear outlet support.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed low-voltage or security systems technician. Power down the camera and any associated PoE switch or injector before making wiring connections. Secure the junction box to a solid structural surface capable of supporting the camera and mount assembly. Follow local codes and manufacturer guidance for conduit entry, sealing, and weatherproofing at outdoor installations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Dimensions\u003c\/strong\u003e: 4.9 inches x 4.9 inches x 2.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBracket Weight\u003c\/strong\u003e: 1.65 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Outdoor or indoor cable junction box with rear cable outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: tr-jb07-d-in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525336564018,"sku":"TR-JB07-D-IN","price":48.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/288488e99713958706d04af576cc3c1f.jpg?v=1785470876"},{"product_id":"uniview-mw3232-v-k2-32-inch-lcd-monitor","title":"Uniview mw3232-v-k2 32 Inch Lcd Monitor","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW mw3232-v-k2 is a 32-inch LCD monitor housed in a lightweight plastic case, designed for professional surveillance and security system applications. The unit features a color management module that renders accurate, true-to-life color output, making it well suited for monitoring environments where image clarity matters. Its ultra-narrow bezel and slim profile reduce footprint on the installation surface, while the lightweight construction simplifies mounting and repositioning. Wide 178-degree viewing angles allow clear visibility from nearly any direction without color or contrast shift.\u003c\/p\u003e\u003cp\u003eThis monitor is suited for commercial and light industrial security installations, control rooms, and multi-monitor surveillance setups. The automatic signal cable detection simplifies setup and reduces configuration time during initial deployment or equipment swaps. It supports both pedestal mount and wall mount configurations, giving installers flexibility based on site requirements. The pedestal assembly and disassembly process is designed to be straightforward, reducing labor time on the job site.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e32-inch LCD panel with wide 178-degree viewing angles\u003c\/li\u003e\n\u003cli\u003eLightweight plastic case reduces overall monitor weight\u003c\/li\u003e\n\u003cli\u003eColor management module for accurate color reproduction\u003c\/li\u003e\n\u003cli\u003eUltra-narrow bezel and slim depth for space-efficient installs\u003c\/li\u003e\n\u003cli\u003eAutomatic signal cable connection detection\u003c\/li\u003e\n\u003cli\u003eSupports both wall mount and pedestal mount configurations\u003c\/li\u003e\n\u003cli\u003eTool-friendly pedestal assembly and disassembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style display solution for professional surveillance and security monitoring systems requiring a 32-inch LCD panel with standard mount options.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of this monitor should be performed by a qualified low-voltage or security systems technician. Before servicing or mounting, disconnect all signal and power cables. Wall mount installations should comply with local building codes and use a mount rated for the monitor weight and size. Verify that the mounting surface can support the load before securing the bracket.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Size\u003c\/strong\u003e: 32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Type\u003c\/strong\u003e: LCD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViewing Angle\u003c\/strong\u003e: 178 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Material\u003c\/strong\u003e: Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Wall mount and pedestal mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: mw3232-v-k2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525351276850,"sku":"MW3232-V-K2","price":279.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bf8ff16b02b9dbb7d781c5ed69803bfc.png?v=1785471300"},{"product_id":"uniview-ipc3614sr3-adpf28-f-black-4mp-ir-turret-camera","title":"Uniview ipc3614sr3-adpf28-f-black 4MP Ir Turret Camera","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe UNIVIEW ipc3614sr3-adpf28-f-black is a 4-megapixel IP turret camera designed for professional surveillance installations. It features a fixed 2.8mm lens and built-in infrared illumination for low-light and nighttime imaging. The black housing suits applications where a discreet or color-matched mounting profile is required. This camera is NDAA compliant, making it eligible for use in federal projects and government-funded installations. Security integrators, low-voltage technicians, and commercial AV contractors are the typical trades installing this unit as part of a networked IP video system.\u003c\/p\u003e\u003cp\u003eThis camera fits residential and light commercial IP surveillance systems where a compact turret form factor is preferred over dome or bullet styles. The 2.8mm focal length provides a wide field of view suited to interior spaces such as lobbies, corridors, retail floors, and entry points. The IR capability extends usable imaging into low-ambient-light environments without supplemental lighting. NDAA compliance broadens its eligibility across public-sector and education projects that enforce federal supply-chain restrictions on video surveillance equipment.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4MP resolution delivers sharper detail than standard 1080p IP cameras\u003c\/li\u003e\n\u003cli\u003eFixed 2.8mm lens provides wide-angle coverage for interior and entry-point applications\u003c\/li\u003e\n\u003cli\u003eBuilt-in infrared illumination supports imaging in low-light and no-light conditions\u003c\/li\u003e\n\u003cli\u003eTurret form factor allows flexible aim adjustment after mounting\u003c\/li\u003e\n\u003cli\u003eBlack housing finish suits discreet or aesthetically specified installations\u003c\/li\u003e\n\u003cli\u003eNDAA compliant for use on federal, government, and publicly funded projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style IP turret camera for use with standard ONVIF-compatible network video recorders and IP video management systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by a licensed low-voltage technician or security systems integrator. Power down the NVR or PoE switch port before making network and power connections. Ensure the mounting surface can support the camera weight and that cable runs comply with applicable low-voltage wiring codes. Do not overtighten the mounting hardware, as this may restrict the aim-adjustment mechanism of the turret housing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution\u003c\/strong\u003e: 4MP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens Focal Length\u003c\/strong\u003e: 2.8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIllumination\u003c\/strong\u003e: Infrared (IR)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Color\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Style\u003c\/strong\u003e: Turret\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e: NDAA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: UNIVIEW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ipc3614sr3-adpf28-f-black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UNIVIEW","offers":[{"title":"Default Title","offer_id":51525390041394,"sku":"IPC3614SR3-ADPF28-F-BLACK","price":94.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b35438fd116c7399189042e39f3e0afa.png?v=1785472512"}],"url":"https:\/\/voomisupply.com\/collections\/uniview.oembed","provider":"Voomi Supply","version":"1.0","type":"link"}