{"title":"PLATSKY","description":null,"products":[{"product_id":"platsky-505025-condensate-pump-115v-1-6-hp","title":"Platsky 505025 Condensate Pump 115V 1\/6 Hp","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PLATSKY 505025 is a 1\/6 HP condensate removal pump rated for 115 volts, designed to handle condensate drainage in HVAC systems where gravity drainage is not practical. This pump moves collected condensate water away from air handlers, furnaces, and cooling coils, discharging it to a suitable drain point. Weighing 10.25 pounds, it is a self-contained unit suited for residential and light commercial installations. Licensed HVAC technicians and service professionals are the primary installers. The 5-MSP designation indicates this is part of PLATSKY's mini split pump product line, making it a natural fit for ductless and split-system applications.\u003c\/p\u003e\u003cp\u003eThis pump is commonly installed in applications where the indoor unit or air handler is located below or far from a gravity drain. Typical scenarios include ceiling-mounted air handlers, attic installations, and wall-mounted mini split indoor heads. It operates on standard 115-volt single-phase power, which is readily available in most residential and light commercial mechanical spaces. Installation is straightforward for qualified technicians familiar with low-voltage drain pump wiring and condensate system requirements.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1\/6 HP motor provides reliable condensate lift capacity\u003c\/li\u003e\n\u003cli\u003e115-volt single-phase operation compatible with standard residential power\u003c\/li\u003e\n\u003cli\u003eCompact, self-contained design suited for tight mechanical spaces\u003c\/li\u003e\n\u003cli\u003eApplicable to mini split and ducted HVAC condensate removal\u003c\/li\u003e\n\u003cli\u003eUnit weight of 10.25 pounds for manageable single-technician handling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style condensate removal pump for residential and light commercial HVAC systems requiring 115-volt condensate lift solutions, including mini split and ducted air handler installations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician following applicable mechanical codes. Disconnect and lock out all power to the HVAC system before connecting or servicing the pump. Ensure the condensate discharge line is routed to an approved drain point and is not kinked or blocked. Do not operate the pump without water present, and verify float switch operation before returning the system to service.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Horsepower\u003c\/strong\u003e: 1\/6 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 10.25 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012105025\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 505025\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383009706290,"sku":"505025","price":186.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678804.jpg?v=1784871133"},{"product_id":"platsky-550521-condensate-removal-pump","title":"Platsky 550521 Condensate Removal Pump","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 550521 is a condensate removal pump designed to evacuate condensate water from HVAC equipment, high-efficiency furnaces, and other appliances that produce liquid condensate during normal operation. These pumps move condensate from the unit to a suitable drain location when gravity drainage is not practical. Licensed HVAC technicians and plumbers install this type of pump as part of system commissioning or as a replacement for a failed unit. At 4.11 pounds and compact enough to fit in tight mechanical spaces, the 550521 is suited for both new installations and direct replacements in residential and light commercial settings.\u003c\/p\u003e\n\u003cp\u003eCondensate removal pumps like the 550521 are commonly applied with high-efficiency gas furnaces, air handlers, fan coils, mini-split systems, and condensing boilers that generate acidic or neutral condensate. The unit fits in confined equipment rooms, utility closets, and attic installations where overhead or horizontal drain runs are required. It is appropriate for residential applications and light commercial HVAC systems where a gravity drain is not available or accessible.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact footprint at 7.000 inches x 5.630 inches x 5.750 inches fits in tight mechanical spaces\u003c\/li\u003e\n  \u003cli\u003eLightweight at 4.11 pounds for easy single-technician handling and mounting\u003c\/li\u003e\n  \u003cli\u003eDesigned for condensate removal from high-efficiency HVAC and condensing appliances\u003c\/li\u003e\n  \u003cli\u003eSuitable for residential and light commercial installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement condensate removal pump for use with high-efficiency furnaces, air handlers, fan coils, mini-splits, and condensing boilers in residential and light commercial HVAC applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or plumber. Disconnect power to all associated equipment before removing or installing the pump. Ensure the discharge line is routed to an approved drain point and that the reservoir inlet tubing is secured and leak-free before restoring power. Follow local mechanical and plumbing codes for condensate disposal requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.11 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 7.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 5.630 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 5.750 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012113499\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 550521\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383027433778,"sku":"550521","price":156.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678227.jpg?v=1784871506"},{"product_id":"platsky-599122-little-giant-float-switch","title":"Platsky 599122 Little Giant Float Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 599122 is a Little Giant float switch designed for liquid level sensing and pump control applications. Float switches of this type open or close an electrical circuit as liquid levels rise or fall, making them a core component in sump, condensate, and general-purpose pump systems. The unit measures 7.50 inches long, 6 inches wide, and 1.50 inches tall, and weighs 0.21 pounds. Licensed plumbers, HVAC technicians, and electrical contractors install these switches in both residential and light commercial settings.\u003c\/p\u003e\n\u003cp\u003eThis float switch is suited for installations where automatic pump activation or shutoff is required based on water or liquid level. Common applications include sump pump systems, condensate removal systems, and other fluid management setups where reliable level detection is needed. Its compact footprint allows installation in space-limited sumps, tanks, and reservoirs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFloat-actuated design provides automatic level sensing without external power to the sensing element\u003c\/li\u003e\n  \u003cli\u003eCompact form factor at 7.50 x 6 x 1.50 inches fits standard sump and tank installations\u003c\/li\u003e\n  \u003cli\u003eLightweight construction at 0.21 pounds simplifies positioning and mounting\u003c\/li\u003e\n  \u003cli\u003eApplicable across sump, condensate, and general liquid-level control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement float switch compatible with Little Giant pump and liquid-level control systems. Verify electrical ratings and tether length against the existing installation before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eFloat switches should be installed by a licensed plumber or HVAC technician in accordance with applicable local codes. Disconnect power to the pump and associated circuitry before removing or installing the switch. Confirm the float moves freely through its full range of motion without contacting sump walls, pipes, or other obstructions. Test pump activation and shutoff cycles after installation to verify correct operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 7.50 inches x 6 inches x 1.50 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.21 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012199122\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 599122\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383042081074,"sku":"599122","price":26.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678204.jpg?v=1784871789"},{"product_id":"platsky-553130101-high-temp-plenum-cabinet","title":"Platsky 553130101 High Temp Plenum Cabinet","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553130101 is a high-temperature plenum cabinet designed for use in forced-air HVAC systems where elevated air temperatures are present in the supply or return plenum section. This component provides a thermally rated enclosure that maintains structural and airflow integrity under sustained high-heat operating conditions. At 11 pounds and measuring 15.12 x 8.25 x 12.56 inches, it is sized for residential and light commercial installations. Licensed HVAC technicians and sheet metal contractors are the primary installers of plenum components like this one.\u003c\/p\u003e\n\u003cp\u003eHigh-temperature plenum cabinets are used in gas furnace and air handler applications where the plenum section is exposed to elevated discharge air temperatures. This product is suited for installations requiring a thermally rated plenum enclosure, including systems with high-efficiency heat exchangers or applications where standard-rated plenum materials are not appropriate. The compact footprint supports installation in tight mechanical spaces typical of residential forced-air systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for high-temperature plenum environments in forced-air HVAC systems\u003c\/li\u003e\n  \u003cli\u003eCompact cabinet dimensions of 15.12 x 8.25 x 12.56 inches for space-constrained installs\u003c\/li\u003e\n  \u003cli\u003eSolid construction at 11 pounds supporting durable field installation\u003c\/li\u003e\n  \u003cli\u003eDesigned as a plenum section component for residential and light commercial systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style high-temperature plenum cabinet replacement for residential and light commercial forced-air HVAC systems requiring thermally rated plenum enclosures.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of plenum components must be performed by a licensed HVAC technician or qualified sheet metal contractor. Always shut down and lock out the furnace or air handler at the disconnect before beginning plenum work. Duct connections must be sealed per local mechanical code requirements and SMACNA guidelines. Do not operate the system until all plenum seams and connections are secured and inspected.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 15.12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 8.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 12.56 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 11 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012100353\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553130101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383082320178,"sku":"553130101","price":331.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678519.jpg?v=1784872495"},{"product_id":"platsky-553240-vertical-condensate-lift-pump-45-gph-115v","title":"Platsky 553240 Vertical Condensate Lift Pump 45 Gph 115V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553240 is a vertical condensate lift pump designed to remove condensate from HVAC systems where gravity drainage is not possible or practical. This unit handles the task of lifting condensate water from fan coil units, air handlers, mini-splits, and high-efficiency furnaces to an elevated drain point. At 45 GPH capacity and rated for 115 volts, it provides reliable flow in residential and light commercial applications. Licensed HVAC technicians and mechanical contractors are the primary installers of this type of equipment during system commissioning or service calls.\u003c\/p\u003e\n\u003cp\u003eThis condensate lift pump is suited for installations where the condensate drain line must be routed upward or horizontally over a long distance before reaching a suitable drain point. Typical applications include finished basements, attic air handlers, closet-mounted fan coils, and any installation where a standard gravity drain is not accessible. The vertical pump configuration allows it to fit in tight mechanical spaces where horizontal clearance is limited.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45 GPH lift capacity handles condensate loads from residential and light commercial HVAC equipment\u003c\/li\u003e\n  \u003cli\u003e115-volt operation compatible with standard single-phase power circuits\u003c\/li\u003e\n  \u003cli\u003eVertical pump design for installation in confined mechanical spaces\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 12.88 inches long by 6.5 inches wide by 11 inches tall\u003c\/li\u003e\n  \u003cli\u003eUnit weight of 12.8 pounds for manageable single-technician handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation condensate lift pump for residential and light commercial HVAC systems requiring vertical condensate removal at 115 volts.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician or qualified mechanical contractor. Shut off power to the associated HVAC system at the disconnect or breaker before connecting or servicing the pump. Ensure the discharge line is free of kinks and that the float switch is unobstructed before restoring power. Follow local mechanical codes for condensate drain line sizing and routing requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Rate\u003c\/strong\u003e: 45 GPH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 12.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 11 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 12.8 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012153240\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553240\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383091462450,"sku":"553240","price":376.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678210.jpg?v=1784872740"},{"product_id":"platsky-599069-check-valve","title":"Platsky 599069 Check Valve","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PLATSKY 599069 is a check valve designed to allow one-directional fluid flow while preventing backflow in plumbing and mechanical systems. Check valves of this type are installed in water supply lines, HVAC hydronic loops, pool and spa plumbing, and other piping systems where reverse flow would cause damage or system inefficiency. Licensed plumbers and mechanical contractors are the typical installers. The 599069 is a direct replacement-style valve suited for maintenance and repair applications where a failed or worn check valve must be swapped out to restore proper system function.\u003c\/p\u003e\u003cp\u003eThis check valve is applicable to residential and light commercial plumbing systems. It is commonly installed at pump outlets, water heater connections, and supply line junctions where backflow prevention is required. Specific system compatibility should be verified against the installation requirements and line size before ordering.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne-directional flow design prevents backflow in pressurized piping systems\u003c\/li\u003e\n\u003cli\u003eSuitable for plumbing, hydronic, and pool or spa piping applications\u003c\/li\u003e\n\u003cli\u003eReplacement-style valve for maintenance and repair service calls\u003c\/li\u003e\n\u003cli\u003eCompact form factor appropriate for residential and light commercial installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement check valve for plumbing and mechanical piping systems requiring backflow prevention. Verify line size and connection type against the existing installation before service.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with applicable IPC or local plumbing code requirements. Shut off the water supply and relieve system pressure before removing the existing valve. Verify flow-direction markings on the valve body and orient accordingly during installation. Do not overtighten fittings; follow the fitting manufacturer torque guidance for the connection type used.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012199069\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 599069\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383135600946,"sku":"599069","price":25.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678211.jpg?v=1784873062"},{"product_id":"platsky-554461-condensate-pump","title":"Platsky 554461 Condensate Pump","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 554461 is a condensate pump designed to remove condensate water produced by HVAC equipment such as air handlers, furnaces, and fan coil units. These pumps collect water from the drain pan and automatically lift it to a suitable discharge point when gravity drainage is not possible. The 554461 is built for installations where the condensate line cannot run by gravity to a floor drain, making it a standard solution in tight mechanical rooms, attic installs, and basement equipment setups. Licensed HVAC technicians and plumbers typically handle installation in residential and light commercial applications.\u003c\/p\u003e\n\u003cp\u003eThe PLATSKY 554461 suits residential and light commercial HVAC installations where condensate must be pumped rather than gravity-drained. It is appropriate for use with central air conditioning systems, heat pumps, high-efficiency gas furnaces, and similar equipment that generates condensate. The compact footprint makes it practical in confined equipment spaces. No specific compatible model numbers or system families were provided in the product data, so consult the manufacturer documentation to confirm fitment for a given application.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact unit sized for tight mechanical spaces at 12 inches long, 7.44 inches wide, and 7.13 inches tall\u003c\/li\u003e\n  \u003cli\u003eLightweight at 6.5 pounds for easy positioning and mounting\u003c\/li\u003e\n  \u003cli\u003eAutomatic operation removes condensate without manual intervention\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with HVAC equipment that cannot gravity-drain condensate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct condensate pump for residential and light commercial HVAC systems where automatic condensate removal is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed HVAC technician or plumber. Disconnect power to all connected equipment before beginning work and ensure the discharge line is routed to an approved drain location per local plumbing codes. Secure the pump on a level surface and verify the inlet barb connections are sealed to prevent leaks. Test the float switch and pump operation before returning equipment to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 7.44 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 7.13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012154461\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 554461\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383176659250,"sku":"554461","price":81.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678203.jpg?v=1784873385"},{"product_id":"platsky-553201-replacement-part","title":"Platsky 553201 Replacement Part","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553201 is a replacement part designed for trade installation in residential or light commercial systems. Weighing 8.2 pounds and measuring 12.88 inches by 6.5 inches by 11 inches, this component is sized for standard service applications. Licensed technicians and qualified tradespeople are the intended installers for this type of part. The input data references a part designation that suggests compatibility with a 24-unit or similarly rated assembly, though full system context was not provided in the available product data.\u003c\/p\u003e\n\u003cp\u003eThis part is suited for use in residential or light commercial service scenarios where a direct OEM-style replacement is required. It is appropriate for installation by licensed technicians familiar with the relevant trade discipline. Refer to the original equipment documentation to confirm fitment before ordering.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact form factor at 12.88 inches by 6.5 inches by 11 inches for installation in space-constrained applications\u003c\/li\u003e\n  \u003cli\u003eWeighs 8.2 pounds for manageable single-technician handling during replacement\u003c\/li\u003e\n  \u003cli\u003eOEM-style replacement designed to restore original system function\u003c\/li\u003e\n  \u003cli\u003eSuitable for residential and light commercial service applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement part for use in applicable residential or light commercial systems. Confirm compatibility against original equipment documentation before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed technician with appropriate trade credentials for the system type involved. Disconnect all power and shut off any fuel supply before beginning disassembly or component replacement. Follow applicable local codes and manufacturer service documentation throughout the installation process. Verify that all connections are secure and system function is confirmed before returning equipment to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 12.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 11 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383248814386,"sku":"553201","price":173.06,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678208.jpg?v=1784874706"},{"product_id":"platsky-599065-condensate-check-valve-cv-10","title":"Platsky 599065 Condensate Check Valve CV-10","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 599065 is a condensate check valve designed to control the one-directional flow of condensate in HVAC drainage systems. Check valves of this type prevent backflow of water through condensate drain lines, protecting equipment and maintaining proper drainage direction. At 0.24 pounds, this is a lightweight, compact component suited for installation in tight mechanical spaces. Licensed HVAC technicians and refrigeration mechanics typically install this valve as part of routine condensate management maintenance or system upgrades.\u003c\/p\u003e\n\u003cp\u003eThis check valve is appropriate for residential and light commercial HVAC applications where condensate backflow prevention is required. It is referenced as a CV-10 Little Giant style replacement, making it a fit for condensate pump and drain line assemblies that call for that valve configuration. It is well suited to split systems, air handlers, and packaged units with active condensate drainage.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-directional flow control prevents condensate backflow in drain lines\u003c\/li\u003e\n  \u003cli\u003eLightweight construction at 0.24 pounds for easy handling in confined spaces\u003c\/li\u003e\n  \u003cli\u003eCV-10 Little Giant style form factor for direct replacement fitment\u003c\/li\u003e\n  \u003cli\u003eCompact profile accommodates standard condensate drain line routing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement check valve for condensate drainage systems requiring a CV-10 Little Giant style component.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified HVAC technician. Shut off power to the air handler or condensate pump system before servicing the drain line assembly. Ensure the valve is oriented correctly to allow flow in the intended direction, as check valves are directional components. Follow all applicable mechanical codes for condensate drainage when replacing or installing drain line fittings.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012199065\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 599065\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383284924722,"sku":"599065","price":16.76,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678231.jpg?v=1784875433"},{"product_id":"platsky-554415-condensate-pump","title":"Platsky 554415 Condensate Pump","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 554415 is a condensate removal pump designed to collect and discharge condensate water generated by air conditioning systems, high-efficiency furnaces, and other HVAC equipment. It handles the automatic removal of liquid condensate from the drain pan, pumping it to a suitable drain location when gravity drainage is not practical. HVAC technicians install this unit in residential and light commercial applications where the equipment is located below or far from a floor drain. The pump measures 12 inches long by 7.44 inches wide by 7.13 inches tall and weighs 6 pounds.\u003c\/p\u003e\n\u003cp\u003eThis condensate pump is suited for use with split-system air conditioners, heat pumps, high-efficiency gas furnaces, fan coil units, and mini-split systems that produce continuous condensate during normal operation. It is typically mounted near the indoor air handling unit or furnace and connected to the equipment drain pan via flexible tubing. The compact footprint allows installation in confined equipment closets and utility spaces where clearance is limited.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact housing at 12 inches x 7.44 inches x 7.13 inches fits tight mechanical spaces\u003c\/li\u003e\n  \u003cli\u003eAutomatic operation removes condensate without manual intervention\u003c\/li\u003e\n  \u003cli\u003eLightweight at 6 pounds for easy positioning and mounting\u003c\/li\u003e\n  \u003cli\u003eDesigned for residential and light commercial HVAC condensate removal\u003c\/li\u003e\n  \u003cli\u003eCompatible with flexible drain tubing for versatile routing to a discharge point\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct condensate pump for residential and light commercial HVAC systems that require automatic condensate removal.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed HVAC technician. Disconnect power to the air handling unit or furnace before installing or servicing the condensate pump. Ensure the discharge line is routed to an appropriate drain and is free of kinks or low spots that could restrict flow. Check local mechanical codes and manufacturer guidelines for required high-water alarm or safety shutoff wiring before commissioning the unit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 12 inches x 7.44 inches x 7.13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012154415\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 554415\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383349870898,"sku":"554415","price":74.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678207.jpg?v=1784876623"},{"product_id":"platsky-554201101-condensate-pump","title":"Platsky 554201101 Condensate Pump","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 554201101 is a condensate removal pump designed to handle condensate drainage in HVAC and refrigeration systems. Condensate pumps collect water produced during cooling and dehumidification cycles and discharge it to a drain or exterior location when gravity drainage is not available. This unit weighs 5.4 pounds and measures 7 inches long by 14 inches wide by 7 inches tall, making it a compact option for tight mechanical spaces. It is typically installed by licensed HVAC technicians during system commissioning or as a replacement in existing installations.\u003c\/p\u003e\n\u003cp\u003eCondensate pumps like the 554201101 are commonly used in residential and light commercial HVAC applications where the air handler, furnace, or fan coil unit is located in a basement, closet, or attic and does not have direct access to a floor drain. The pump collects condensate in a reservoir and automatically activates when the water level reaches a set point, discharging the water through a small-diameter drain line to an appropriate disposal point.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact footprint at 7 inches x 14 inches x 7 inches for installation in confined spaces\u003c\/li\u003e\n  \u003cli\u003eLightweight construction at 5.4 pounds for easier handling and mounting\u003c\/li\u003e\n  \u003cli\u003eAutomatic float-activated operation typical of condensate pump design\u003c\/li\u003e\n  \u003cli\u003eSuitable for condensate drainage in HVAC, mini-split, and refrigeration applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation condensate pump for residential and light commercial HVAC systems requiring automatic condensate removal.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified HVAC technician. Disconnect power to the air handling unit or connected equipment before servicing or replacing the condensate pump. Ensure the discharge line is routed with adequate slope and is free of kinks or obstructions that could cause backup. Verify the safety switch circuit is wired correctly to shut down the system in the event of a high-water condition.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5.4 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 7 inches x 14 inches x 7 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 02975300576\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 554201101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383367500082,"sku":"554201101","price":98.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678244.jpg?v=1784877062"},{"product_id":"platsky-554221101-condenser-fan-motor-1-30hp-115v","title":"Platsky 554221101 Condenser Fan Motor 1\/30HP 115V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 554221101 is a condenser fan motor rated at 1\/30 HP and 115 volts, 60 Hz, designed for use in refrigeration and HVAC condensing units. This single-phase motor provides the airflow needed to reject heat from the condenser coil, keeping system pressures and temperatures within operating range. Weighing 4.5 pounds, it is a compact unit suited for light-duty condensing applications. Licensed HVAC-R technicians typically install and service this motor as part of routine maintenance or component-level repair on condensing equipment.\u003c\/p\u003e\n\u003cp\u003eThis motor is appropriate for residential and light commercial condensing units where a low-horsepower, 115-volt single-phase motor is specified. Typical installation scenarios include rooftop condensing units, reach-in refrigeration cases, and small split-system condenser sections. The VCCA-20-P designation found in supplier documentation indicates a product family intended for compact condenser fan assemblies operating on standard 115-volt circuits.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRated at 1\/30 HP for light-duty condenser fan applications\u003c\/li\u003e\n  \u003cli\u003e115-volt, 60 Hz single-phase operation compatible with standard residential and light commercial power\u003c\/li\u003e\n  \u003cli\u003eCompact form factor at 4.5 pounds for straightforward replacement installation\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain condenser airflow and system efficiency in refrigeration and HVAC equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement condenser fan motor for compact residential and light commercial refrigeration or HVAC condensing units requiring a 1\/30 HP, 115-volt, 60 Hz single-phase motor.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified HVAC-R technician. Disconnect and lock out all electrical power to the unit before removing the existing motor or handling wiring connections. Verify that the replacement motor rotation direction matches the original before securing the fan blade and reinstalling the assembly. Follow applicable NEC requirements for motor replacement and ensure all electrical connections are secure before restoring power.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 1\/30 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency\u003c\/strong\u003e: 60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 02975300583\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 554221101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383367631154,"sku":"554221101","price":167.83,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678249.jpg?v=1784877065"},{"product_id":"platsky-553211-replacement-part","title":"Platsky 553211 Replacement Part","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553211 is a replacement component designed for professional installation in trade applications. Weighing 8.2 pounds, this part is built to meet the demands of service technicians working in residential or light commercial environments. The raw product data provided is limited, but the unit is positioned as a direct-fit replacement for systems requiring this specific manufacturer part number. Licensed trade professionals should verify application compatibility before installation.\u003c\/p\u003e\n\u003cp\u003eThis part is suited for technicians sourcing a replacement by manufacturer part number. It is intended for use in systems where the 553211 is specified as a required component. Verify fitment against the original equipment documentation before ordering to ensure correct application.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect replacement sourced by OEM part number 553211\u003c\/li\u003e\n  \u003cli\u003eShipping weight of 8.2 pounds indicates a substantial, hardware-grade component\u003c\/li\u003e\n  \u003cli\u003eDesigned for professional installation by licensed trade technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a replacement part identified by manufacturer part number 553211. Consult original equipment documentation or the manufacturer directly to confirm system-level compatibility before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified trade professional. Shut down and de-energize all related systems before beginning any service work. Follow applicable local codes and manufacturer guidelines throughout the installation process. Do not attempt installation without verifying that this part matches the original component specifications for the target system.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383380410674,"sku":"553211","price":171.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678206.jpg?v=1784877348"},{"product_id":"platsky-513273-alarm","title":"Platsky 513273 Alarm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 513273 is an alarm unit designed for monitoring and alert functions in trade and building service applications. This component provides audible or signal-based notification when a monitored condition reaches a threshold, supporting system safety and code compliance. Licensed technicians and service professionals install this type of device as part of a broader control or safety circuit. The 513273 is a direct OEM-style replacement part sourced from PLATSKY, suitable for professionals who need a reliable drop-in alarm component.\u003c\/p\u003e\n\u003cp\u003eThis alarm unit is appropriate for residential and light commercial applications where a dedicated alarm or alert device is required within a control system. It is typically installed by HVAC technicians, plumbers, electricians, or building automation professionals as part of routine service, system upgrade, or component replacement work. Refer to the original equipment documentation to confirm correct placement and wiring within the target system.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-style replacement alarm unit from PLATSKY\u003c\/li\u003e\n  \u003cli\u003eDesigned for integration into control and safety monitoring circuits\u003c\/li\u003e\n  \u003cli\u003eCompact form factor suited for residential and light commercial installations\u003c\/li\u003e\n  \u003cli\u003eSupports system safety and alert notification requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement alarm component for systems requiring the PLATSKY 513273 part number. Consult the original equipment documentation to verify fitment before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified trade professional familiar with the target system type. Disconnect and lock out all power to the system before removing or installing the alarm unit. Follow applicable local electrical codes and manufacturer wiring diagrams. Do not bypass or modify the alarm circuit during servicing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012113273\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 513273\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383442538802,"sku":"513273","price":360.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678958.jpg?v=1784878341"},{"product_id":"platsky-555112-condenser-fan-motor-1-10-hp-115v","title":"Platsky 555112 Condenser Fan Motor 1\/10 Hp 115V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 555112 is a condenser fan motor rated at 1\/10 horsepower and 115 volts, designed for use in residential and light commercial HVAC condensing units. This motor drives the condenser fan blade to move air across the coil, rejecting heat from the refrigerant circuit. At 4.7 pounds and a compact footprint of 5.19 inches by 4.63 inches by 7.00 inches, it fits standard condenser fan deck configurations. Installation is performed by licensed HVAC technicians as part of routine motor replacement or system repair work.\u003c\/p\u003e\n\u003cp\u003eThe PLATSKY 555112 Model 360 is suited for split-system air conditioner and heat pump condensing units operating on single-phase 115-volt power. It is a direct replacement in applications requiring a 1\/10 HP condenser fan motor of matching voltage and physical dimensions. Always verify shaft diameter, rotation, and mounting bolt pattern against the existing motor before installation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/10 HP output suitable for standard condenser fan blade loads\u003c\/li\u003e\n  \u003cli\u003e115-volt single-phase operation for common residential service\u003c\/li\u003e\n  \u003cli\u003eCompact dimensions of 5.19 inches x 4.63 inches x 7.00 inches aid drop-in replacement\u003c\/li\u003e\n  \u003cli\u003eLightweight at 4.7 pounds for easier overhead or rooftop unit service\u003c\/li\u003e\n  \u003cli\u003eModel 360 designation for straightforward cross-reference identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement condenser fan motor for residential and light commercial split-system air conditioners and heat pumps requiring a 1\/10 HP, 115-volt motor with matching physical dimensions.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician. Disconnect and lock out all electrical power to the condensing unit before removing the existing motor or handling wiring. Confirm shaft length, rotation direction, and mounting configuration match the replacement motor prior to installation. Follow local electrical codes and manufacturer wiring diagrams when reconnecting leads.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 1\/10 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H)\u003c\/strong\u003e: 5.19 inches x 4.63 inches x 7.00 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.7 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012100606\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 555112\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383528980786,"sku":"555112","price":240.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678212.jpg?v=1784880112"},{"product_id":"platsky-554435-condensate-pump","title":"Platsky 554435 Condensate Pump","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 554435 is a condensate removal pump designed for use in HVAC systems where gravity drainage is not an option. It collects and pumps condensate water away from cooling coils, air handlers, and high-efficiency furnaces to an approved drain location. The unit weighs 6 pounds and measures 12 inches long by 7.44 inches wide by 7.13 inches tall, making it compact enough for tight mechanical room installations. Licensed HVAC technicians and refrigeration mechanics are the typical installers for this type of equipment.\u003c\/p\u003e\n\u003cp\u003eCondensate pumps of this type are used in residential and light commercial HVAC applications where the evaporator coil or air handler drain pan sits below the nearest available drain line. The 554435 is suited for split systems, fan coils, and high-efficiency gas furnaces that produce acidic condensate. It can also serve mini-split indoor units and packaged terminal equipment in retrofit or new-construction scenarios where gravity drainage cannot be achieved.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact form factor at 12 inches x 7.44 inches x 7.13 inches fits in confined equipment spaces\u003c\/li\u003e\n  \u003cli\u003eLightweight construction at 6 pounds simplifies single-technician handling and mounting\u003c\/li\u003e\n  \u003cli\u003eDesigned for continuous-duty condensate removal in cooling and high-efficiency heating systems\u003c\/li\u003e\n  \u003cli\u003eUPC-registered product (01012154435) for streamlined procurement and inventory tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style condensate removal pump suitable for residential and light commercial HVAC systems requiring auxiliary condensate drainage.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician in accordance with local mechanical codes and the equipment manufacturer guidelines. Disconnect power to the air handler or furnace before connecting the condensate pump wiring or drain tubing. Ensure the inlet tubing from the drain pan slopes toward the pump reservoir with no low spots that could trap water. Verify the discharge line runs to an approved drain point and is not kinked or obstructed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 7.44 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 7.13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012154435\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 554435\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383641243954,"sku":"554435","price":80.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678205.jpg?v=1784882206"},{"product_id":"platsky-553101-vacuum-circuit-lifter-115v-6ft-60hz","title":"Platsky 553101 Vacuum Circuit Lifter 115V 6FT 60hz","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553101 is a vacuum circuit lifter rated for 115 volts at 60 Hz with a 6-foot cord, designed for use in electrical and HVAC service applications where controlled vacuum circuit operation is required. This unit delivers reliable performance in demanding trade environments. At 6.8 pounds, the 553101 is built for field portability while maintaining the durability expected in professional service work. Licensed electricians and HVAC technicians are the primary installers and operators of this equipment.\u003c\/p\u003e\n\u003cp\u003eThe PLATSKY 553101 suits residential and light commercial service scenarios where a dependable vacuum circuit lifter is needed. The 6-foot cord length provides practical reach during installation or service calls without requiring extension adapters in most standard configurations. Its 115-volt, 60 Hz rating aligns with standard North American single-phase power supplies, making it compatible with typical service outlet availability on job sites.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRated for 115 volts at 60 Hz standard North American power\u003c\/li\u003e\n  \u003cli\u003e6-foot cord length for practical field reach\u003c\/li\u003e\n  \u003cli\u003eCompact and portable at 6.8 pounds\u003c\/li\u003e\n  \u003cli\u003eDesigned for professional trade use in electrical and HVAC service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use vacuum circuit lifter for standard 115-volt, 60 Hz service applications. No specific model compatibility data was provided in the product input.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis unit should be installed or operated by a qualified electrician or licensed HVAC technician in accordance with applicable NEC requirements. Ensure the power supply is de-energized and locked out before making any electrical connections. Verify that the supply circuit matches the 115-volt, 60 Hz rating before energizing. Follow all applicable local codes and manufacturer guidelines during installation and service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency\u003c\/strong\u003e: 60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCord Length\u003c\/strong\u003e: 6 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6.8 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012153101\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383723229490,"sku":"553101","price":160.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678573.jpg?v=1784883845"},{"product_id":"platsky-553245-vacuum-circuit-lifter","title":"Platsky 553245 Vacuum Circuit Lifter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553245 is a vacuum circuit lifter designed for use in electrical and mechanical trade applications. Referenced under model designation VCL45ULS230, this unit is built for professional installation and service tasks requiring controlled vacuum-assisted lifting or circuit handling. At 14 pounds, it is a substantial piece of equipment suited for hands-on trade use. Licensed electricians and mechanical contractors are the primary installers of this type of equipment.\u003c\/p\u003e\n\u003cp\u003eThe PLATSKY 553245 is appropriate for commercial and industrial service environments where vacuum circuit lifting is required. The VCL45ULS230 designation suggests a 45-unit class lifter configured for 230-volt applications, making it relevant to single-phase or three-phase electrical panel and circuit service work. It is typically installed or deployed by licensed electricians or qualified service technicians.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSubstantial 14-pound build indicating a durable, full-duty construction\u003c\/li\u003e\n  \u003cli\u003eModel designation VCL45ULS230 indicating 230-volt class configuration\u003c\/li\u003e\n  \u003cli\u003eDesigned for vacuum-assisted circuit lifting applications in trade environments\u003c\/li\u003e\n  \u003cli\u003eUPC-registered product (UPC: 01012153245) for standardized inventory and procurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service unit for vacuum circuit lifter applications in 230-volt electrical service environments. No specific compatible model numbers or system families were provided in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation of this vacuum circuit lifter should be performed by a licensed electrician or qualified trade professional. Always de-energize and lock out the circuit before beginning any installation or service work in accordance with NFPA 70E electrical safety standards. Verify that the supply voltage matches the equipment rating before connecting. Follow all applicable NEC requirements for the jurisdiction where the work is performed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 14 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012153245\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553245\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383729258802,"sku":"553245","price":412.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678209.jpg?v=1784883990"},{"product_id":"platsky-553160101-vertical-condensate-lift-pump-115v","title":"Platsky 553160101 Vertical Condensate Lift Pump 115V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 553160101 is a vertical condensate lift pump designed to remove condensate from HVAC equipment when gravity drainage is not possible or practical. Operating at 115 volts and 60 Hz, this unit handles condensate generated by air handlers, fan coils, mini-splits, and other cooling or high-efficiency heating equipment. The pump forces collected condensate upward or horizontally to a suitable drain point, protecting equipment from overflow-related damage. Licensed HVAC technicians and installation crews typically specify this pump for applications where the equipment drain pan sits below the nearest drain line.\u003c\/p\u003e\n\u003cp\u003eThis condensate lift pump is suited for residential and light commercial installations where standard gravity drainage is not feasible. Common applications include finished basements, attic installations, and mechanical rooms where the unit sits below or level with available drain lines. The HT-VCL-60-P designation indicates a vertical pump configuration intended for use with standard HVAC condensate volumes in typical split-system or packaged equipment installs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eVertical condensate lift design for installations without gravity drain access\u003c\/li\u003e\n  \u003cli\u003eOperates at 115 volts, 60 Hz — compatible with standard North American electrical service\u003c\/li\u003e\n  \u003cli\u003eCompact footprint at 15.12 inches x 8.25 inches x 12.56 inches for tight mechanical spaces\u003c\/li\u003e\n  \u003cli\u003eHandles condensate from air handlers, fan coils, mini-splits, and high-efficiency furnaces\u003c\/li\u003e\n  \u003cli\u003eManufacturer part number HT-VCL-60-P for direct cross-reference ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style condensate lift pump for residential and light commercial HVAC systems requiring forced condensate removal where gravity drainage is unavailable.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician in accordance with local mechanical codes and the equipment manufacturer guidelines. Disconnect power to the HVAC system before connecting or servicing the pump. Ensure the inlet tubing is sized and routed to allow complete drainage from the equipment drain pan without air locks. Verify the discharge line rise and run are within the pump rated lift capacity before completing the installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 115 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency\u003c\/strong\u003e: 60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 15.12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 8.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 12.56 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 14.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012100349\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 553160101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383775625522,"sku":"553160101","price":420.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678518.jpg?v=1784884931"},{"product_id":"platsky-599123-overflow-safety-switch","title":"Platsky 599123 Overflow Safety Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 599123 is an overflow safety switch designed to detect and respond to condensate overflow conditions in HVAC systems. When the condensate drain pan reaches a high-water threshold, the switch interrupts system operation to prevent water damage to ceilings, walls, and equipment. This type of safety device is a standard component in residential and light-commercial air conditioning and air handling installations. HVAC technicians install the 599123 as a protective control in systems where drain pan overflow poses a risk to occupied spaces below the equipment.\u003c\/p\u003e\n\u003cp\u003eThe 599123 is suited for use in residential and light-commercial HVAC applications where condensate management is critical. Typical installations include attic-mounted air handlers, horizontal evaporator coil configurations, and packaged units with internal drain pans. The switch mounts in or near the secondary condensate pan and wires into the low-voltage control circuit to shut down the system before overflow occurs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eInterrupts system operation on condensate overflow to prevent water damage\u003c\/li\u003e\n  \u003cli\u003eDesigned for integration into low-voltage HVAC control circuits\u003c\/li\u003e\n  \u003cli\u003eCompact form factor suitable for tight equipment access areas\u003c\/li\u003e\n  \u003cli\u003eLightweight construction at 0.29 pounds for easy handling during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement overflow safety switch for residential and light-commercial HVAC condensate drain pan applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician. Disconnect power to the air handler or furnace before wiring the switch into the control circuit. The switch is typically wired in series with the thermostat low-voltage circuit so that a high-water condition will break the call for cooling. Refer to local mechanical codes and the equipment manufacturer wiring diagram for correct placement and wiring configuration.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.29 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 12.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 12.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 4.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 01012199123\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 599123\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51383786930482,"sku":"599123","price":26.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/312678501.jpg?v=1784885139"},{"product_id":"platsky-70885-ptfe-thread-seal-tape-0-5-x-1429-in","title":"Platsky 70885 Ptfe Thread Seal Tape 0.5 X 1429 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PLATSKY 70885 is a heavy-duty PTFE thread seal tape designed for use on threaded pipe connections in plumbing, HVAC, gas, and mechanical systems. Known as Blue Monster, this tape is manufactured without pre-stretching, which results in a denser, more uniform tape thickness compared to standard PTFE tapes. That density means fewer wraps are needed to achieve an effective seal, eliminating the need for supplemental pipe dope in most applications. Rated to 10000 psi and suitable across a temperature range of -450 degrees F to 500 degrees F, this tape performs in demanding service conditions including high-pressure water, steam, and chemical lines.\u003c\/p\u003e\n\u003cp\u003eThis tape is suited for residential and commercial pipe threading applications where a reliable, leak-free connection is required. Plumbers, pipefitters, HVAC technicians, and gas service professionals use this product on male threaded fittings before assembly. The 0.5 inch width fits standard half-inch and three-quarter-inch threaded pipe ends cleanly, and the 1429 inch roll length provides high job-count yield per roll. Blue color allows visual confirmation of tape application during inspection.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-pre-stretched PTFE construction creates a denser tape for a more effective thread seal\u003c\/li\u003e\n  \u003cli\u003eRated to 10000 psi maximum pressure for high-pressure line applications\u003c\/li\u003e\n  \u003cli\u003eTemperature range of -450 degrees F to 500 degrees F covers cryogenic through high-heat service\u003c\/li\u003e\n  \u003cli\u003eBlue color provides easy visual confirmation of proper tape application\u003c\/li\u003e\n  \u003cli\u003eLong 1429 inch roll length reduces roll changeover frequency on busy job sites\u003c\/li\u003e\n  \u003cli\u003eEliminates need for pipe dope in compatible threaded connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on standard male NPT and other threaded pipe fittings in plumbing, HVAC, gas distribution, and industrial piping systems where PTFE thread sealant tape is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThread seal tape is installed by licensed plumbers, pipefitters, and HVAC technicians in accordance with applicable plumbing and mechanical codes including the IPC and IFGC. Always depressurize and drain the line before disassembling threaded connections. Wrap tape clockwise around male threads, in the direction of thread engagement, to prevent unraveling during assembly. Do not use tape on flare or compression fittings.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PTFE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1429 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Pressure\u003c\/strong\u003e: 10000 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Range\u003c\/strong\u003e: -450 degrees F to 500 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PLATSKY\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 70885\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PLATSKY","offers":[{"title":"Default Title","offer_id":51467810275634,"sku":"70885","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313944950.jpg?v=1784858458"}],"url":"https:\/\/voomisupply.com\/collections\/platsky.oembed","provider":"Voomi Supply","version":"1.0","type":"link"}