{"title":"EAGLE CUTTING TOOL","description":null,"products":[{"product_id":"eagle-cutting-tool-sdsm-5000-18-d-sds-max-drill-bit","title":"Eagle Cutting Tool SDSM-5000-18-D Sds Max Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL SDSM-5000-18-D is an SDS Max rotary hammer drill bit designed for heavy-duty concrete and masonry drilling. Built for use with SDS Max rotary hammer tools, this bit delivers the impact energy transfer and shank retention needed for demanding core drilling and anchoring applications in concrete, block, and brick. At 1\/2 inch in diameter and 18 inches in overall length, it provides extended reach for deep embedment depths required by structural anchors, conduit penetrations, and through-slab work. Trade professionals in mechanical, electrical, and construction disciplines rely on SDS Max bits like this one for controlled, repeatable bore diameters in reinforced and unreinforced concrete substrates.\u003c\/p\u003e\u003cp\u003eThis bit is suited for commercial and residential construction applications where long-reach concrete drilling is required. Typical use cases include drilling anchor bolt holes in concrete foundations and slabs, creating penetrations for conduit and pipe sleeves through masonry walls, and drilling into block or brick for mechanical fasteners. The 18-inch length makes it particularly useful when working through thick walls or poured concrete decks where shorter bits cannot reach full embedment depth.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSDS Max shank for positive locking in SDS Max rotary hammer chucks\u003c\/li\u003e\n\u003cli\u003e1\/2 inch cutting diameter for standard anchor and conduit penetration sizing\u003c\/li\u003e\n\u003cli\u003e18 inch overall length provides extended reach for deep-penetration drilling\u003c\/li\u003e\n\u003cli\u003eDesigned for rotary hammer use in concrete, block, and masonry materials\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.96 pounds for reduced operator fatigue during overhead or extended use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and standard fit for SDS Max rotary hammer tools accepting the SDS Max shank interface.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSDS Max drill bits are installed and removed by a licensed or qualified trades professional using an SDS Max rotary hammer tool — never a standard drill or SDS Plus tool, as the shank interfaces are not interchangeable. Before drilling near existing structure, verify the absence of embedded conduit, rebar, or post-tension cables using a scanning tool. Wear appropriate PPE including eye protection and hearing protection during operation. Follow applicable building and fire codes when creating penetrations through fire-rated assemblies.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.96 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SDSM-5000-18-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233189658930,"sku":"SDSM-5000-18-D","price":37.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624141.png?v=1780093652"},{"product_id":"eagle-cutting-tool-ht-13750-12-p-i-hss-hand-plug-tap","title":"Eagle Cutting Tool HT-13750-12-P-I Hss Hand Plug Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL HT-13750-12-P-I is a high-speed steel (HSS) hand plug tap sized for 1-3\/8 inch diameter threads at 12 threads per inch (TPI). A plug tap carries a chamfer of roughly 3 to 5 threads, placing it between a taper and a bottoming tap in the standard tap progression. This chamfer length allows the tool to start cleanly in a drilled hole and cut full threads through most of the depth with moderate hand-tool torque. It is intended for manual threading operations using a tap handle or tap wrench and is not designed for machine-driven applications. Machinists, pipefitters, and maintenance technicians reach for this tap when threading new holes or chasing existing threads in ferrous and non-ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThis tap is suited for through-hole and partial blind-hole threading in shop, field, and maintenance settings. Typical applications include threading bolt-clearance holes in structural steel, machinery frames, and heavy flanges where a 1-3\/8 inch-12 UN thread is specified. The fine 12 TPI pitch provides greater thread engagement strength and finer adjustment compared to the coarse-pitch equivalent, making it a common choice in load-bearing and vibration-sensitive assemblies. The import designation indicates sourcing outside domestic manufacture, offering a cost-effective option for general-purpose threading tasks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction provides hardness and wear resistance for threading steel, iron, and aluminum\u003c\/li\u003e\n  \u003cli\u003ePlug chamfer (approximately 3-5 threads) allows easy starting in pre-drilled through holes and shallow blind holes\u003c\/li\u003e\n  \u003cli\u003e1-3\/8 inch diameter, 12 TPI fine-pitch thread form for high thread-engagement strength\u003c\/li\u003e\n  \u003cli\u003eDesigned for manual hand-tap use with a standard tap wrench or T-handle\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1, suitable for single-unit procurement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard hand plug tap for 1-3\/8 inch-12 UNF thread form, compatible with matching standard tap wrenches and suitable for use in holes pre-drilled to the correct tap drill diameter for a 1-3\/8-12 thread specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eA licensed machinist or qualified tradesperson should verify the correct tap drill size before drilling to ensure proper thread percentage and tool life. Secure the workpiece firmly and use a calibrated tap wrench to apply straight, aligned torque — misalignment is a leading cause of tap breakage on larger-diameter taps. Apply cutting fluid appropriate to the workpiece material throughout the threading operation. Back the tap out periodically to clear chips, especially in blind holes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1-3\/8 inches - 12 TPI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Pitch\u003c\/strong\u003e: 12 TPI (fine)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Hand Plug Tap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-13750-12-P-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233189986610,"sku":"HT-13750-12-P-I","price":109.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622654.png?v=1780093661"},{"product_id":"eagle-cutting-tool-ht-3750-16-t-d-3-8-16-hss-taper-tap","title":"Eagle Cutting Tool HT-3750-16-T-D 3\/8-16 Hss Taper Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL HT-3750-16-T-D is a 3\/8-16 high-speed steel (HSS) hand taper tap designed to cut internal threads in a wide range of materials. The taper lead progressively distributes cutting load across several threads, making thread starting easier and reducing tool breakage risk. With a 4-flute geometry and H-3 tolerance class, this tap produces accurate, consistent threads suited to general-purpose fastener engagement. Manufactured in the USA, it is a standard choice for machinists, maintenance technicians, pipefitters, and plumbers performing threaded-hole work on metal components.\u003c\/p\u003e\n\u003cp\u003eThis tap is suited for threading operations on ferrous and non-ferrous metals in maintenance, repair, and manufacturing environments. The 3\/8-16 UNC thread form is one of the most common unified coarse thread sizes, used extensively in structural assemblies, equipment frames, and mechanical fittings. The taper style is typically used for starting a thread in a blind or through hole, particularly when hand-tapping with a T-handle or tap wrench.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8-16 UNC thread form for compatibility with standard unified coarse fastener sizes\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction provides hardness and wear resistance across a broad material range\u003c\/li\u003e\n  \u003cli\u003eTaper lead distributes cutting load gradually, reducing breakage during thread starting\u003c\/li\u003e\n  \u003cli\u003e4-flute design promotes chip evacuation and thread accuracy\u003c\/li\u003e\n  \u003cli\u003eH-3 tolerance class delivers controlled thread fit for general mechanical applications\u003c\/li\u003e\n  \u003cli\u003eMade in the USA to consistent dimensional standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard hand taper tap for use in any application requiring 3\/8-16 UNC internal threads in metal or compatible materials using a tap wrench or T-handle driver.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eHand taps should be installed by qualified machinists or trade professionals familiar with threading operations. Always use appropriate cutting fluid for the workpiece material to extend tool life and improve thread quality. Ensure the hole is drilled to the correct tap drill diameter before tapping, and periodically reverse the tap to break chips and prevent binding. Follow applicable shop safety practices and secure the workpiece before beginning thread-cutting operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8-16 UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Hand Taper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Class\u003c\/strong\u003e: H-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-3750-16-T-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233190347058,"sku":"HT-3750-16-T-D","price":16.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622854.png?v=1780093671"},{"product_id":"eagle-cutting-tool-tfz-27256-et-carbide-tipped-cutter","title":"Eagle Cutting Tool TFZ-27256-ET Carbide Tipped Cutter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TFZ-27256-ET is a carbide tipped annular cutter designed for drilling clean, precise holes in steel and other ferrous metals. With a 1-3\/4 inch cutting diameter and a 2 inch depth of cut, this cutter is built for magnetic drill presses and similar drilling equipment used in fabrication, structural steel, and ironworking applications. The carbide tipped construction provides durability and extended tool life compared to standard high-speed steel cutters, making it a reliable choice for repetitive production cutting or heavy-duty field work.\u003c\/p\u003e\u003cp\u003eThis cutter is suited for professional use in structural steel fabrication, metal manufacturing, and construction environments where consistent hole quality and cutting efficiency are required. It is typically installed in magnetic drill presses, milling machines, or similar tooling platforms. Machinists, ironworkers, and fabricators working in both shop and field settings will find this cutter appropriate for their hole-making operations in ferrous materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 inch cutting diameter for standard structural hole sizing\u003c\/li\u003e\n\u003cli\u003e2 inch depth of cut accommodates thicker steel sections and stacked material\u003c\/li\u003e\n\u003cli\u003eCarbide tipped cutting edges for extended tool life and heat resistance\u003c\/li\u003e\n\u003cli\u003eCompatible with magnetic drill press arbors used in fabrication and ironwork\u003c\/li\u003e\n\u003cli\u003eWeighs 0.97 pounds for easy handling and tool changeout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use annular cutter for magnetic drill presses and drilling equipment that accept standard annular cutter arbor configurations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eAnnular cutters of this type are installed by licensed machinists or experienced fabricators using appropriate arbors and cutting fluid for the target material. Always power down and lock out the drill press or magnetic drill before mounting or removing the cutter. Use cutting fluid or coolant during operation to manage heat buildup and extend cutter life. Follow applicable OSHA and shop safety guidelines when operating magnetic drill equipment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Type\u003c\/strong\u003e: Carbide Tipped Annular Cutter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.97 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TFZ-27256-ET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233190478130,"sku":"TFZ-27256-ET","price":109.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307625226.png?v=1780093676"},{"product_id":"eagle-cutting-tool-tfz-25258-et-cobalt-universal-end-mill","title":"Eagle Cutting Tool TFZ-25258-ET Cobalt Universal End Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TFZ-25258-ET is a cobalt universal end mill designed for demanding metal removal applications in professional machine shop and industrial environments. Built from high-speed cobalt steel, this end mill offers improved heat and wear resistance compared to standard high-speed steel tooling. The 1-13\/16 inch cutting diameter paired with a 2 inch length of cut makes it well suited for deeper passes in ferrous and non-ferrous materials. Machinists and tooling professionals rely on cobalt-grade cutters like this one when working with tougher alloys that generate significant cutting heat.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in CNC machining centers, manual knee mills, and bridgeport-style equipment where a universal geometry is required across a range of materials. The universal flute design supports both roughing and finishing passes, making it a practical choice for job shops that need versatile tooling without changing cutters mid-operation. It is appropriate for residential toolroom applications as well as production-level industrial environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt high-speed steel construction for improved heat and wear resistance\u003c\/li\u003e\n\u003cli\u003e1-13\/16 inch cutting diameter for substantial material removal per pass\u003c\/li\u003e\n\u003cli\u003e2 inch length of cut accommodates deeper slot and profile work\u003c\/li\u003e\n\u003cli\u003eUniversal geometry supports both roughing and finishing operations\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1 unit for single-cutter procurement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use cobalt end mill compatible with standard milling machine spindles and tool holders accepting the appropriate shank diameter and collet size.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of end mills should be performed by qualified machinists following proper toolholding procedures. Ensure the machine spindle is fully powered down and locked out before changing or seating the cutter. Use a properly sized collet or end mill holder and verify tool runout before beginning a cut. Always follow applicable shop safety standards and machine manufacturer guidelines when setting speeds and feeds.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-13\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.97 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TFZ-25258-ET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233190543666,"sku":"TFZ-25258-ET","price":187.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307625187.png?v=1780093678"},{"product_id":"eagle-cutting-tool-cdw-27500-1-1-4-7-wet-core-drill-bit","title":"Eagle Cutting Tool CDW-27500-1-1\/4-7 Wet Core Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL CDW-27500-1-1\/4-7 is a wet core drill bit designed for cutting precise circular holes through masonry, concrete, and similar hard materials. Measuring 2-3\/4 inches in cutting diameter, it uses water during the drilling process to cool the bit and reduce dust. Wet core drilling is the standard method for trade professionals when working with reinforced or dense concrete, as it extends bit life and produces cleaner cuts. Weighing 8.08 pounds, this bit is suited for use with compatible core drill rigs that accept a 1-1\/4 inches by 7 thread mount.\u003c\/p\u003e\n\u003cp\u003eThis wet core drill bit is used in applications where precise, clean-bore penetrations are required through concrete, block, or masonry assemblies. Common install scenarios include plumbing sleeve penetrations, HVAC duct and pipe pass-throughs, electrical conduit routing, and sleeve installations through foundation walls or floor slabs. It is appropriate for both residential and light commercial work. Plumbers, HVAC mechanics, and electricians regularly use wet core bits when code-compliant penetrations through structural materials are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2-3\/4 inch cutting diameter for standard-size penetrations through masonry and concrete\u003c\/li\u003e\n  \u003cli\u003eWet cutting design cools the bit during use and minimizes airborne silica dust\u003c\/li\u003e\n  \u003cli\u003e1-1\/4 inches by 7 thread mount for compatibility with standard core drill rigs\u003c\/li\u003e\n  \u003cli\u003e8.08 pound construction built to handle the demands of repeated core drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with core drill rigs and motor units that accept a 1-1\/4 inches by 7 thread arbor connection. Confirm thread specification on the host machine before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eWet core drilling should be performed by qualified tradespeople familiar with core drill rig operation and applicable codes such as the IPC or IFGC when creating pipe or duct penetrations. Always secure the core drill rig to the work surface and ensure a continuous water supply is flowing before beginning the cut. De-energize any electrical systems in the work area and confirm no embedded conduit, rebar, or utilities are present in the cut path before drilling. Dispose of slurry waste in accordance with local regulations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 2-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Mount\u003c\/strong\u003e: 1-1\/4 inches x 7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Method\u003c\/strong\u003e: Wet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.08 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CDW-27500-1-1\/4-7\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233191002418,"sku":"CDW-27500-1-1\/4-7","price":164.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307621979.png?v=1780093694"},{"product_id":"eagle-cutting-tool-ht-1228-t-d-12-28-hss-taper-tap","title":"Eagle Cutting Tool HT-1228-T-D 12-28 Hss Taper Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL HT-1228-T-D is a 12-28 high-speed steel taper tap manufactured in the USA. This hand tap is used to cut internal threads in metal workpieces, starting the threading process with a gradual taper that makes thread engagement easier. The 12-28 designation identifies the thread size as a number 12 diameter with 28 threads per inch, a fine-pitch unified national thread form. At 0.08 pounds, it is a compact, lightweight tool suited for precision threading in tight applications. Licensed machinists, pipefitters, HVAC technicians, and electricians reach for taper taps when starting threads in new holes or clearing damaged threads in metal brackets, enclosures, and fittings.\u003c\/p\u003e\u003cp\u003eThis taper tap is used in metalworking applications where a 12-28 thread must be cut in steel, aluminum, brass, or similar metals. It is appropriate for both shop and field use, including threading holes in electrical enclosures, HVAC equipment panels, mounting brackets, and mechanical assemblies. The taper entry reduces cutting force on entry and helps align the tap square to the workpiece, which is especially useful when threading by hand. USA manufacture is noted on the product.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e12-28 thread form — number 12 diameter, 28 threads per inch, fine-pitch unified national thread\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction for durability across a range of metals\u003c\/li\u003e\n\u003cli\u003eTaper style entry distributes cutting load gradually for easier thread starting\u003c\/li\u003e\n\u003cli\u003eUSA manufactured\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.08 pounds — suitable for field toolkits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in any application requiring a 12-28 UNF internal thread, including metalwork in HVAC, electrical, plumbing, and general mechanical trade applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tap is installed by hand or with a standard tap wrench; use of a proper tap wrench is recommended to maintain alignment and avoid breakage. Always secure the workpiece before tapping and apply a suitable cutting fluid to extend tool life and improve thread quality. Back the tap out periodically to clear chips, particularly when threading deeper holes. Disposal of metal chips and spent cutting fluid should follow applicable shop safety practices.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 12-28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Form\u003c\/strong\u003e: UNF (Unified National Fine)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Style\u003c\/strong\u003e: Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-1228-T-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233191133490,"sku":"HT-1228-T-D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622670.png?v=1780093698"},{"product_id":"eagle-cutting-tool-sds4350-1875-4-d-sds-masonry-drill-bit","title":"Eagle Cutting Tool SDS4350-1875-4-D Sds Masonry Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL SDS4350-1875-4-D is an SDS-shank masonry drill bit designed for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit measures 3\/16 inch in diameter with a 4-5\/8 inch overall length (OAL) and features a delta-style carbide tip geometry engineered for fast penetration and extended service life. This bit is a standard trade-size fastener-prep tool used by electricians, plumbers, HVAC installers, and general contractors when anchoring into masonry walls, floors, and ceilings.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for light-duty to medium-duty masonry boring in residential and commercial construction. Common applications include drilling anchor holes for conduit straps, pipe hangers, equipment mounting brackets, and threaded rod anchors in poured concrete or concrete masonry units (CMU). The 3\/16 inch diameter is a frequently specified size for 3\/16 inch or 1\/4 inch anchor systems. The SDS shank type ensures positive bit retention in SDS-compatible rotary hammers during hammer and rotation mode.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSDS shank for secure, tool-free bit changes in SDS rotary hammers\u003c\/li\u003e\n  \u003cli\u003eDelta-style carbide tip for aggressive masonry penetration and heat dissipation\u003c\/li\u003e\n  \u003cli\u003e3\/16 inch diameter suits common anchor and fastener pilot-hole requirements\u003c\/li\u003e\n  \u003cli\u003e4-5\/8 inch OAL provides adequate depth capacity for standard anchor embedment in typical wall assemblies\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.13 pounds, reducing fatigue in overhead or extended drilling tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use masonry drill bit compatible with SDS-style rotary hammers used in trade and construction applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed or qualified trade professionals using an SDS rotary hammer set to hammer-drill mode. Wear appropriate PPE including eye protection and hearing protection when operating rotary hammer equipment. Confirm anchor manufacturer minimum embedment depth requirements before drilling to ensure proper hole depth. Do not use this bit in standard drill-only mode without hammer engagement, as this may damage the bit tip and reduce penetration performance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Style\u003c\/strong\u003e: Delta Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 3\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 4-5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Masonry, Concrete, Brick, Block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SDS4350-1875-4-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233191526706,"sku":"SDS4350-1875-4-D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624043.png?v=1780093709"},{"product_id":"eagle-cutting-tool-ht-832-t-i-8-32-hss-hand-taper-tap","title":"Eagle Cutting Tool HT-832-T-I 8-32 Hss Hand Taper Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL HT-832-T-I is a high-speed steel (HSS) hand taper tap designed to cut 8-32 UNC threads in through-holes and blind holes. Taper taps feature a gradual lead angle across the first several threads, distributing cutting forces progressively and making thread starting easier in a range of workpiece materials. This tool is intended for hand tapping operations using a standard tap wrench or T-handle, and is suited for use by machinists, maintenance technicians, electricians, and HVAC or plumbing professionals threading metal components in the field or on the bench.\u003c\/p\u003e\n\u003cp\u003eThe HT-832-T-I is used in applications that require 8-32 UNC machine screw threads, a common fastener size found in electrical enclosures, control panels, HVAC equipment, and light mechanical assemblies. Taper taps are the preferred starting tap when threading new holes by hand, particularly in steel, aluminum, brass, and similar metals. This import-grade tap is appropriate for general-purpose threading tasks where production volume is moderate and cost efficiency matters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCuts 8-32 UNC threads — a widely used machine screw size in electrical and mechanical work\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction provides hardness and wear resistance for threading metal\u003c\/li\u003e\n  \u003cli\u003eTaper lead distributes cutting load gradually, reducing tap breakage when starting threads by hand\u003c\/li\u003e\n  \u003cli\u003eDesigned for hand tapping with a standard tap wrench or T-handle driver\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.31 pounds — easy to carry in a field service pouch or toolbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose hand taper tap for any application requiring 8-32 UNC threads in metal or similarly machinable materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThread cutting should be performed by a qualified technician familiar with hand tapping procedures. Always secure the workpiece before tapping, apply appropriate cutting fluid to extend tap life and improve thread quality, and back off the tap periodically to break chips. Do not force the tap if resistance increases sharply — back out, clear chips, and re-apply cutting fluid to avoid tap breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 8-32 UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Hand Taper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-832-T-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233191919922,"sku":"HT-832-T-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623094.png?v=1780093722"},{"product_id":"eagle-cutting-tool-ht-640-t-d-6-40-hss-taper-tap","title":"Eagle Cutting Tool HT-640-T-D 6-40 Hss Taper Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL HT-640-T-D is a 6-40 high-speed steel taper tap manufactured in the United States. It is designed to cut internal threads in through-holes and blind holes where the tapered lead angle helps guide the tap into the workpiece for accurate thread engagement. The taper style provides a gradual cutting action, distributing cutting load across multiple leading threads to reduce breakage risk in harder materials. This tap is a standard hand and machine tap used by machinists, pipefitters, electricians, and HVAC technicians when threading small fastener holes in metal components and enclosures.\u003c\/p\u003e\u003cp\u003eThe HT-640-T-D is suited for threading 6-40 Unified Fine (UNF) holes in ferrous and non-ferrous metals. Common applications include electrical panel fabrication, HVAC equipment assembly, control board mounting hardware, and general sheet metal work where small-diameter precision threads are required. It is appropriate for both production machine tapping and hand-tapping operations on the bench.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6-40 UNF thread form for small-diameter precision threading applications\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides durability and heat resistance during cutting\u003c\/li\u003e\n\u003cli\u003eTaper lead angle distributes cutting load to reduce tap breakage in harder materials\u003c\/li\u003e\n\u003cli\u003eUSA manufactured for consistent dimensional accuracy and thread quality\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.08 pounds, easy to handle in confined work areas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 6-40 UNF taper tap compatible with manual tap handles and machine tap holders sized for small-shank hand taps.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eTapping should be performed by a machinist or qualified tradesperson using the appropriate tap handle or tapping head. Always drill the correct tap drill size for a 6-40 thread before starting the tap, and use a suitable cutting fluid to extend tap life and improve thread quality. Back the tap off periodically to break chips and prevent binding. Never force a tap; if resistance increases unexpectedly, back out and clear chips before continuing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 6-40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Form\u003c\/strong\u003e: Unified Fine (UNF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Style\u003c\/strong\u003e: Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-640-T-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233192182066,"sku":"HT-640-T-D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623085.png?v=1780093731"},{"product_id":"eagle-cutting-tool-d250-209-d-hss-split-point-drill-bit","title":"Eagle Cutting Tool D250-209-D Hss Split Point Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL D250-209-D is a high-speed steel (HSS) split point drill bit manufactured in the USA. The 135-degree split point geometry reduces walking on contact, allowing the bit to start cleanly without a center punch on most metal surfaces. Designed for production drilling and general metalworking, this bit suits fabrication shops, mechanical contractors, and industrial maintenance trades that require consistent, repeatable hole quality in steel, iron, and similar ferrous materials.\u003c\/p\u003e\u003cp\u003eThe D250-209-D is suited for use in handheld drills, drill presses, and CNC or manual lathes where HSS tooling is appropriate. It is a strong fit for residential and commercial mechanical work, sheet metal fabrication, and maintenance applications where reliable performance in steel and hard plastics is required. The split point design is particularly effective in applications where bit walking or breakthrough burring is a concern.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e135-degree split point tip reduces bit walking and improves centering on contact\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides hardness and heat resistance for metal drilling\u003c\/li\u003e\n\u003cli\u003eUSA manufactured for consistent dimensional tolerances\u003c\/li\u003e\n\u003cli\u003eCompatible with standard drill chucks for handheld and press-mounted use\u003c\/li\u003e\n\u003cli\u003eSplit point geometry minimizes breakthrough burring on thin stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard HSS split point drill bit for use in metalworking, fabrication, and mechanical maintenance applications with conventional drill chucks and drill press spindles.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by qualified tradespeople familiar with metal cutting and drilling operations. Secure the workpiece firmly before drilling and ensure the drill is properly chucked and tightened before operation. Use appropriate cutting fluid or lubricant when drilling ferrous metals to extend bit life and maintain dimensional accuracy. Inspect the cutting edges before each use and replace the bit if chipping or significant wear is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 135 degrees split point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: D250-209-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233192640818,"sku":"D250-209-D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622354.png?v=1780093747"},{"product_id":"eagle-cutting-tool-mt-390-400-t-i-hss-metric-taper-tap","title":"Eagle Cutting Tool MT-390-400-T-I Hss Metric Taper Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL MT-390-400-T-I is a high-speed steel (HSS) metric taper tap designed to cut internal threads in metal workpieces. It is sized for an M39.0 thread diameter with a 4.00 mm pitch, making it suitable for large-diameter threading applications in manufacturing, industrial maintenance, and heavy fabrication environments. The taper lead allows gradual thread engagement, which reduces cutting force and helps align the tap squarely in the hole. Machinists, millwrights, and maintenance mechanics are the primary users of this tool.\u003c\/p\u003e\u003cp\u003eThis tap is applied wherever M39.0x4.00 metric threads need to be cut by hand or with a tapping fixture. Typical applications include fabricating threaded holes in steel plate, cast iron, and similar ferrous materials used in industrial equipment and structural assemblies. The taper style is especially useful when starting threads in a new, unthreaded hole where a gradual entry is preferred over a bottoming or plug profile.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM39.0x4.00 metric thread form for large-diameter internal threading\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides wear resistance and durability in ferrous materials\u003c\/li\u003e\n\u003cli\u003eTaper lead design eases thread entry and promotes straight alignment during cutting\u003c\/li\u003e\n\u003cli\u003eImport-grade tooling suited for maintenance, repair, and lower-volume production applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard M39.0x4.00 metric taper tap for use with compatible tap wrenches, T-handles, or tapping fixtures that accommodate large-diameter taps.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tap should be installed and operated by a qualified machinist or maintenance mechanic familiar with threading operations. Before tapping, ensure the workpiece is securely clamped and that the pilot hole is drilled to the correct tap drill diameter for an M39.0x4.00 thread. Use appropriate cutting fluid throughout the operation to reduce heat and extend tool life. Never force the tap if resistance increases sharply, as this risks tool breakage in the hole.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M39.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Pitch\u003c\/strong\u003e: 4.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Form\u003c\/strong\u003e: Metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Style\u003c\/strong\u003e: Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MT-390-400-T-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233193623858,"sku":"MT-390-400-T-I","price":148.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623522.png?v=1780093765"},{"product_id":"eagle-cutting-tool-c304-126-d-cobalt-jobber-drill-no-26","title":"Eagle Cutting Tool C304-126-D Cobalt Jobber Drill No. 26","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL C304-126-D is a No. 26 cobalt jobber-length drill bit manufactured in the USA. Cobalt construction gives the bit superior heat resistance compared to standard high-speed steel, making it suitable for drilling harder materials including stainless steel, cast iron, and high-strength alloys. The jobber-length flute design provides a balance of reach and rigidity appropriate for general-purpose production drilling. This bit is a standard trade tool used by machinists, pipefitters, electricians, and maintenance professionals working in industrial and commercial settings.\u003c\/p\u003e\u003cp\u003eThe C304-126-D is suited for use in drill presses, lathes, and hand-held power drills where a No. 26 diameter hole is required. Common applications include tapping preparation, clearance holes, and through-hole drilling in ferrous and non-ferrous metals. Its cobalt composition makes it a practical choice for shops and field crews that regularly work with materials that generate significant cutting heat.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt construction for extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eNo. 26 jobber-length geometry balances reach with drill rigidity\u003c\/li\u003e\n\u003cli\u003eUSA manufactured\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose sizing suitable for tap drilling and clearance hole applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard No. 26 jobber-length drill bit compatible with any chuck accepting its shank diameter, including 3-jaw drill press chucks and hand-held power drill chucks commonly used in machining and trade work.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSecure the bit firmly in the chuck before operation and verify the workpiece is clamped or fixtured to prevent movement during drilling. Use appropriate cutting fluid when drilling hard metals to extend bit life and reduce heat buildup. Wear eye protection and follow applicable shop safety procedures when operating drilling equipment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Size\u003c\/strong\u003e: No. 26\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.42 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C304-126-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233193918770,"sku":"C304-126-D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307621009.png?v=1780093773"},{"product_id":"eagle-cutting-tool-tac40-201-i-hss-jobber-drill-bit","title":"Eagle Cutting Tool TAC40-201-I Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL TAC40-201-I is a high-speed steel (HSS) jobber-length drill bit manufactured for import distribution. HSS jobber drills are general-purpose cutting tools sized and ground to standard jobber-length proportions, making them suitable for a wide range of hole-drilling operations in metal, wood, and plastic substrates. This bit is a compact, lightweight option at 0.15 pounds, well suited for professional tradespeople who need a reliable, standard-geometry drill for everyday service and installation work.\u003c\/p\u003e\n\u003cp\u003eJobber-length HSS drill bits see regular use across HVAC, plumbing, electrical, and general mechanical trades wherever pilot holes, clearance holes, or through-holes are required during equipment installation or rough-in work. The TAC40-201-I is appropriate for use in hand drills, drill presses, and magnetic-base drills in both shop and field settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction for durability across common drilling materials\u003c\/li\u003e\n  \u003cli\u003eJobber-length geometry provides a balance of reach and rigidity\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.15 pounds for easy handling and portability\u003c\/li\u003e\n  \u003cli\u003eStandard import-grade bit suitable for general-purpose trade applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard jobber-length HSS drill bit compatible with conventional three-jaw drill chucks used in portable hand drills and drill presses.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall in a properly sized chuck and verify the bit is fully seated and securely tightened before operation. Use appropriate cutting speed for the material being drilled and apply cutting fluid when working with ferrous metals to extend bit life. Always wear eye protection when drilling. Follow applicable workplace safety codes for rotating cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Type\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TAC40-201-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233194377522,"sku":"TAC40-201-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624394.png?v=1780093784"},{"product_id":"eagle-cutting-tool-nhd-7500-14-i-npt-pipe-hex-die-3-4-14","title":"Eagle Cutting Tool NHD-7500-14-I Npt Pipe Hex Die 3\/4-14","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL NHD-7500-14-I is a carbon steel NPT pipe hex die sized for 3\/4-14 threads, used to cut external tapered pipe threads on round stock and pipe ends. The hex body design allows the die to be driven with a standard pipe die stock or adjustable wrench, making it a practical choice for field and shop threading work. At 0.37 pounds, it is compact enough for a tool bag without sacrificing the rigidity needed to produce clean, accurate NPT threads. Plumbers, pipefitters, and mechanical contractors reach for this style of die when threading black iron, carbon steel, or galvanized pipe to NPT standards.\u003c\/p\u003e\n\u003cp\u003eThis die is suited for residential and light commercial plumbing and gas piping applications where 3\/4-inch NPT threaded connections are required. It is a common tool on rough-in jobs involving gas lines, water supply runs, and compressed air piping. The import designation indicates this is a value-tier die appropriate for moderate-volume threading tasks rather than continuous production use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/4-14 NPT thread specification for standard tapered pipe thread cutting\u003c\/li\u003e\n  \u003cli\u003eHex body design compatible with standard pipe die stocks and adjustable wrenches\u003c\/li\u003e\n  \u003cli\u003eCarbon steel construction provides adequate hardness for threading mild steel and iron pipe\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.37 pounds for easy transport and field use\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1, available as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard 3\/4-14 NPT hex pipe die for use with compatible hex-style pipe die stocks and threading tools that accept this die body format.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis die is installed and driven by a licensed plumber or pipefitter following applicable code requirements such as the IFGC or IPC. Before threading, secure the pipe in a vise and apply cutting oil liberally to extend die life and produce cleaner threads. Inspect the die for chips or cracks before each use, and replace if the cutting edges are visibly worn. Do not force the die if it binds, as this can damage both the die and the workpiece.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Specification\u003c\/strong\u003e: 3\/4-14 NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Style\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.37 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: NHD-7500-14-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233194574130,"sku":"NHD-7500-14-I","price":32.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623519.png?v=1780093791"},{"product_id":"eagle-cutting-tool-tfz-27240-et-carbide-tipped-cutter","title":"Eagle Cutting Tool TFZ-27240-ET Carbide Tipped Cutter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TFZ-27240-ET is a carbide tipped cutter designed for precision material removal in metalworking and fabrication applications. With a 1-1\/4 inch cutting diameter and a 2 inch length of cut, this tool delivers the reach and rigidity needed for demanding cutting operations. The carbide tipped construction provides hardness and wear resistance beyond standard high-speed steel tooling. Machinists, tool and die professionals, and fabricators working with ferrous and non-ferrous materials rely on this type of cutter for consistent, repeatable results across production and maintenance work.\u003c\/p\u003e\u003cp\u003eThis cutter is suited for use in milling machines, machining centers, and similar metal-cutting equipment found in commercial machine shops, maintenance facilities, and manufacturing environments. The 2 inch length of cut accommodates deeper passes where shorter tooling would fall short. At 0.97 pounds, the tool balances mass and handling for standard spindle setups without excessive runout risk.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCarbide tipped construction for extended tool life compared to high-speed steel alternatives\u003c\/li\u003e\n\u003cli\u003e1-1\/4 inch cutting diameter for precise bore and milling applications\u003c\/li\u003e\n\u003cli\u003e2 inch length of cut provides adequate reach for deeper material engagement\u003c\/li\u003e\n\u003cli\u003eCompact weight of 0.97 pounds supports balanced spindle operation\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1 unit allows single-piece procurement for repair and replacement needs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replacement or supplemental cutter for standard milling and boring setups accepting a 1-1\/4 inch diameter carbide tipped tool with a 2 inch length of cut.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician familiar with proper tool holder torque procedures and runout verification. Ensure the spindle is fully powered down and locked out before mounting or removing the cutter. Confirm that the tool holder arbor and collet are clean and free of debris before seating the cutter. Follow applicable shop safety standards and machine manufacturer guidelines for tooling changes.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Type\u003c\/strong\u003e: Carbide Tipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.97 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TFZ-27240-ET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233194639666,"sku":"TFZ-27240-ET","price":87.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307625190.png?v=1780093793"},{"product_id":"eagle-cutting-tool-mhd-360-400-i-metric-hex-die-m36","title":"Eagle Cutting Tool MHD-360-400-I Metric Hex Die M36","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL MHD-360-400-I is a carbon steel metric hex die designed to cut external M36.0 x 4.00 threads on bolts, studs, rods, and threaded fasteners. The hex-body profile accepts a standard die stock or wrench for controlled torque application during threading operations. With an M36 nominal diameter and 4.00 mm pitch, this die handles large-diameter metric threading tasks common in heavy equipment, structural fabrication, and industrial maintenance work. Machinists, maintenance technicians, and fabricators working in metric environments will find this die suitable for both new thread cutting and thread chasing on damaged fasteners.\u003c\/p\u003e\u003cp\u003eThis die is suited for use in fabrication shops, maintenance facilities, and field repair environments where large metric threads are required. It is appropriate for threading mild steel, low-carbon steel, and similar workpiece materials consistent with the carbon steel tooling grade. The M36.0 x 4.00 specification corresponds to a standard coarse-pitch metric thread, commonly found on heavy structural bolts, machinery anchor studs, and large industrial fasteners.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM36.0 x 4.00 metric coarse-pitch thread specification for large-diameter external threading\u003c\/li\u003e\n\u003cli\u003eCarbon steel construction for cutting mild and low-carbon steel workpieces\u003c\/li\u003e\n\u003cli\u003eHex body profile compatible with standard die stocks and hex die wrenches\u003c\/li\u003e\n\u003cli\u003eSuitable for both new thread cutting and chasing existing damaged threads\u003c\/li\u003e\n\u003cli\u003eImport-grade tooling offering a cost-effective option for lower-frequency applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or standard hex die for use with die stocks and wrenches accepting M36 hex dies; no specific model compatibility was provided in the product data.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis die should be installed by a machinist or qualified maintenance technician using a properly sized die stock or hex wrench. Ensure the workpiece is securely clamped before beginning thread cutting. Apply cutting oil to the die and workpiece to reduce heat and extend tool life during threading operations. Inspect the die for chips or damage before each use and replace if cutting edges are worn.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M36.0 x 4.00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Metric Coarse Pitch External\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie Body Style\u003c\/strong\u003e: Hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.18 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MHD-360-400-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233194836274,"sku":"MHD-360-400-I","price":48.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623400.png?v=1780093800"},{"product_id":"eagle-cutting-tool-chd-8750-14-i-carbon-hex-rethread-die","title":"Eagle Cutting Tool CHD-8750-14-I Carbon Hex Rethread Die","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL CHD-8750-14-I is a carbon hex rethread die designed to restore damaged or corroded external threads to their original specification. Sized for 7\/8-14 NF (National Fine) thread, this hex-body die fits standard die stocks and hand wrenches, making it practical for field repairs and shop use alike. Weighing 1.96 pounds, it is a solid, duty-rated tool suited for mechanics, pipe fitters, HVAC technicians, and maintenance professionals who need to recover threaded fasteners and fittings rather than replace them outright.\u003c\/p\u003e\n\u003cp\u003eThis rethread die is used wherever 7\/8-14 NF external threads appear on bolts, studs, pipe fittings, and threaded rod. Common applications include HVAC equipment repairs, plumbing and mechanical systems, and general industrial maintenance. The hex outer profile allows use with a standard open-end wrench or adjustable wrench in confined spaces where a full die stock cannot be used, making it well suited to in-place thread restoration on installed components.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/8-14 NF thread specification for National Fine external thread restoration\u003c\/li\u003e\n  \u003cli\u003eHex outer body accepts standard open-end or adjustable wrenches and die stocks\u003c\/li\u003e\n  \u003cli\u003eCarbon steel construction provides hardness suitable for rethreading steel and iron fasteners\u003c\/li\u003e\n  \u003cli\u003eCompact, single-piece design for easy storage in a service bag or toolbox\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1 — available as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on 7\/8-14 NF external threads. Fits standard hex die stocks and open-end wrenches sized for the die body. Suitable for rethreading steel and iron bolts, studs, and threaded fittings of matching thread specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThread restoration dies are typically used by mechanics, HVAC technicians, plumbers, and maintenance trades. Before use, clean the damaged thread area and apply cutting oil to reduce heat and extend die life. Start the die straight onto the fastener to avoid cross-threading, and advance in short increments, backing off periodically to clear chips. Always wear appropriate hand protection when operating cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 7\/8-14 NF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDie Type\u003c\/strong\u003e: Hex Rethread Die\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.96 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CHD-8750-14-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233194967346,"sku":"CHD-8750-14-I","price":19.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622057.png?v=1780093804"},{"product_id":"eagle-cutting-tool-sb-wb-875-spade-bit-7-8-x-6-in","title":"Eagle Cutting Tool SB-WB.875 Spade Bit 7\/8 X 6 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL SB-WB.875 is a spade bit designed for boring clean, flat-bottomed holes in wood. With a cutting diameter of 7\/8 inches and an overall length of 6 inches, this bit provides the reach needed for drilling through framing members, structural lumber, and wood substrates where standard-length bits fall short. It is a hand-tool consumable installed by electricians, plumbers, HVAC technicians, and general contractors who need to route conduit, pipe, or ductwork through wood framing. The extended length allows access in tight or deep applications where a standard-length bit cannot reach the full depth of the workpiece.\u003c\/p\u003e\n\u003cp\u003eThis spade bit is suited for residential and light commercial work. Typical applications include drilling through wall studs, floor joists, and roof framing to pass wiring, pipe, or refrigerant line sets. The 7\/8-inch diameter is a common size for routing 3\/4-inch conduit, copper tubing, and similar trade rough-in work. At 6 inches in length, it reaches through doubled framing members and thick sheathing without requiring an extension.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/8-inch cutting diameter suits standard trade rough-in hole sizes\u003c\/li\u003e\n  \u003cli\u003e6-inch length provides extended reach through thick or doubled framing\u003c\/li\u003e\n  \u003cli\u003eFlat spade geometry produces a clean, defined hole in wood substrates\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.14 pounds for reduced fatigue during repetitive drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1\/4-inch hex-shank or 3\/8-inch and 1\/2-inch drill chucks compatible with spade bit shanks. Intended for use in wood and wood-composite materials only.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed by electricians, plumbers, and HVAC technicians during rough-in phases. Ensure the drill is set to an appropriate speed for the wood species and bit diameter before beginning the bore. Do not use this bit on metal, masonry, or concrete. Inspect the bit for wear or damage before each use and replace if the cutting edges are chipped or deformed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SB-WB.875\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233195098418,"sku":"SB-WB.875","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623686.png?v=1780093808"},{"product_id":"eagle-cutting-tool-ht-15000-6-b-i-hss-hand-bottom-tap","title":"Eagle Cutting Tool HT-15000-6-B-I Hss Hand Bottom Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL HT-15000-6-B-I is a high-speed steel (HSS) hand bottom tap designed for cutting internal threads in through-holes and blind holes where full thread depth to the bottom is required. With a 1-1\/2 inch nominal diameter and 6 threads per inch (TPI) UNC thread form, this tap is built for heavy-duty threading applications in metal fabrication, maintenance, and repair work. The bottom chamfer style allows threading closer to the base of a blind hole than taper or plug taps, making it the final step in a three-tap sequence or a standalone tool when near-full thread depth is the job requirement.\u003c\/p\u003e\u003cp\u003eThis tap is suited for use in industrial maintenance, machine shops, fabrication yards, and field repair scenarios where large-diameter fastener threads must be cut or restored. The 1-1\/2-6 UNC size is common in heavy structural, industrial, and mechanical assemblies. It is intended for hand tapping operations and is used by machinists, pipefitters, millwrights, and mechanical contractors working with large-diameter threaded connections.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBottom chamfer geometry allows threading to near-full depth in blind holes\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides hardness and wear resistance for threading steel and iron\u003c\/li\u003e\n\u003cli\u003e1-1\/2 inch diameter, 6 TPI UNC thread form for heavy industrial fastener applications\u003c\/li\u003e\n\u003cli\u003eHand tap design compatible with standard tap wrenches sized for large-diameter taps\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.31 pounds for a tool of this diameter, reducing hand fatigue during use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style hand bottom tap for cutting or restoring 1-1\/2 in 6 TPI UNC internal threads in ferrous and non-ferrous metals using a standard hand tap wrench.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tap is installed by licensed machinists, millwrights, and mechanical tradespeople using a properly sized hand tap wrench. Always ensure the workpiece is securely fixtured before tapping. Use an appropriate cutting fluid to reduce heat and extend tool life. When used as a bottom tap, a taper or plug tap should be run through the hole first to establish the thread lead before finishing with this bottom tap.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Diameter\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreads Per Inch (TPI)\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Form\u003c\/strong\u003e: UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Hand Bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-15000-6-B-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233195163954,"sku":"HT-15000-6-B-I","price":135.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622649.png?v=1780093811"},{"product_id":"eagle-cutting-tool-mt-022-045-b-i-hss-metric-bottom-tap","title":"Eagle Cutting Tool MT-022-045-B-I Hss Metric Bottom Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL MT-022-045-B-I is an M2.2x0.45 high-speed steel (HSS) metric bottom tap designed for threading blind holes to their full depth. As a bottom tap, it produces threads closer to the bottom of a hole than taper or plug taps allow, making it the finishing step in precision metric tapping operations. Weighing 0.09 pounds, this compact tap is suited for detail work in small-diameter applications where thread quality and depth are critical. Machinists, toolmakers, and maintenance technicians rely on this style of tap when working in confined or depth-restricted bores.\u003c\/p\u003e\u003cp\u003eThis tap is used in metalworking and machining environments where M2.2x0.45 metric threads are required in blind holes. Typical applications include precision instrument manufacturing, electronics hardware, small-fastener assemblies, and repair work on metric-threaded components. It is appropriate for use in hand tapping operations or with low-speed tapping machines when controlled feed and torque are maintained.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBottom tap geometry threads blind holes to near-full depth\u003c\/li\u003e\n\u003cli\u003eM2.2x0.45 metric thread form for precise, standard-compliant threads\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction provides wear resistance and durability across a range of metals\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.09 pounds, suited for fine detail and small-bore work\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1, available as a single-unit purchase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use metric bottom tap for M2.2x0.45 thread applications in hand tapping and light machine tapping setups.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eBottom taps should be used as the final step after a taper or plug tap has already started the thread in the workpiece. Secure the workpiece firmly before tapping and apply appropriate cutting fluid to extend tap life and improve thread finish. Use a calibrated tap wrench or low-speed tapping machine and advance with steady, controlled torque to avoid breakage in small-diameter taps. Inspect the hole depth and tap engagement before each use to prevent bottoming out and tap breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M2.2x0.45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Bottom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: Metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MT-022-045-B-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233195295026,"sku":"MT-022-045-B-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623387.png?v=1780093815"},{"product_id":"eagle-cutting-tool-chd-3125-18-i-5-16-18-nc-hex-rethread-die","title":"Eagle Cutting Tool CHD-3125-18-I 5\/16-18 Nc Hex Rethread Die","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL CHD-3125-18-I is a carbon steel hex rethread die designed to restore damaged or corroded external threads on 5\/16 inch-18 NC (National Coarse) fasteners and threaded rod. The hexagonal body allows for easy engagement with a standard wrench or die stock for controlled torque application. This die is well suited for field repair and shop use by plumbers, HVAC technicians, electricians, and general maintenance trades who need a fast way to clean up or restore threads without replacing the fastener entirely.\u003c\/p\u003e\u003cp\u003eThis rethread die is appropriate for use on 5\/16 inch-18 NC threaded bolts, studs, and rods commonly found in mechanical systems, pipe hangers, equipment mounting hardware, and structural fasteners. It is a practical addition to any service van or shop toolbox where thread repair tasks arise on residential and light commercial work. The hex body format makes it compatible with standard open-end wrenches and adjustable wrenches, eliminating the need for a dedicated die handle.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5\/16 inch-18 NC thread specification for National Coarse fastener repair\u003c\/li\u003e\n\u003cli\u003eHexagonal body design allows direct wrench engagement without a dedicated die stock\u003c\/li\u003e\n\u003cli\u003eCarbon steel construction provides adequate hardness for restoring threads on common fastener materials\u003c\/li\u003e\n\u003cli\u003eSuitable for cleaning and restoring damaged, corroded, or paint-coated external threads\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1 unit for single-piece procurement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on 5\/16 inch-18 NC externally threaded fasteners including bolts, studs, and all-thread rod in standard National Coarse thread form.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThread repair dies should be applied to the fastener by hand-starting the die straight onto the thread axis before applying wrench torque to avoid cross-threading. Back the die off periodically to clear metal chips, especially on corroded fasteners. No power tools should be used to drive this die. Wear appropriate hand and eye protection when performing thread repair operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 5\/16 inch-18 NC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: National Coarse (NC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Style\u003c\/strong\u003e: Hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.96 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CHD-3125-18-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233196048690,"sku":"CHD-3125-18-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622025.png?v=1780093841"},{"product_id":"eagle-cutting-tool-sds4350-3750-24-d-sds-masonry-drill-bit","title":"Eagle Cutting Tool SDS4350-3750-24-D Sds Masonry Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL SDS4350-3750-24-D is an SDS-shank masonry drill bit designed for rotary hammer drilling into concrete, block, brick, and similar masonry substrates. The bit measures 3\/8 inch in diameter with a 24-inch overall length, making it well suited for deep anchor holes and through-wall penetrations. The Delta tip geometry is engineered to improve cutting speed and extend bit life in hard aggregate materials. Licensed contractors and trade professionals working with rotary hammers will find this bit appropriate for demanding production drilling tasks.\u003c\/p\u003e\n\u003cp\u003eThis bit is intended for use in residential and commercial masonry applications where an SDS-style rotary hammer is the specified tool. Typical install scenarios include setting anchor bolts, drilling conduit penetrations through CMU walls, and boring holes for plumbing or mechanical sleeves. The 24-inch overall length provides reach for deep-set applications without requiring a bit extension. The 3\/8-inch diameter matches common anchor and sleeve specifications used across HVAC, plumbing, and electrical rough-in work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSDS shank for positive engagement in SDS and SDS-Plus rotary hammers\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch diameter suits common anchor bolt and conduit sleeve applications\u003c\/li\u003e\n  \u003cli\u003e24-inch overall length enables deep penetrations and through-wall drilling\u003c\/li\u003e\n  \u003cli\u003eDelta tip geometry designed for aggressive cutting in concrete and masonry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard-use SDS masonry bit compatible with SDS and SDS-Plus rotary hammers used in concrete, brick, block, and masonry drilling applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified tradesperson familiar with rotary hammer operation and applicable safety codes. Confirm the hammer chuck accepts an SDS shank before inserting the bit, and ensure the bit is fully seated and locked before drilling. Wear appropriate eye and hearing protection when operating rotary hammers in masonry. Inspect the bit for carbide tip damage or shank wear before each use and retire the bit if the tip shows significant chipping or the shank is deformed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 24 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Style\u003c\/strong\u003e: Delta\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SDS4350-3750-24-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233196245298,"sku":"SDS4350-3750-24-D","price":33.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624083.png?v=1780093846"},{"product_id":"eagle-cutting-tool-sds4350-1562-8-d-sds-masonry-drill-bit","title":"Eagle Cutting Tool SDS4350-1562-8-D Sds Masonry Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL SDS4350-1562-8-D is an SDS-shank masonry drill bit engineered for rotary hammer applications in concrete, block, brick, and stone. The bit measures 5\/32 inch in diameter with an overall length of 8-5\/8 inches, making it well suited for deeper anchor hole placements and through-penetration work. The delta-style carbide tip geometry is designed to reduce heat buildup and improve chip evacuation during aggressive hammer drilling. At 0.1 pounds, it is a lightweight, single-use replacement bit commonly stocked by masonry and concrete trades.\u003c\/p\u003e\n\u003cp\u003eThis bit is intended for use in residential and light commercial construction and renovation work where SDS-plus rotary hammers are the standard tool. Typical applications include setting sleeve anchors, drilling conduit penetrations through concrete or CMU block, and core layout work in masonry substrates. It is suited for licensed electricians, plumbers, and general contractors who need a reliable small-diameter SDS bit for repetitive anchor and penetration drilling tasks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDelta carbide tip geometry for efficient chip evacuation and reduced heat buildup\u003c\/li\u003e\n  \u003cli\u003e5\/32 inch diameter suits small anchor and fastener hole applications\u003c\/li\u003e\n  \u003cli\u003e8-5\/8 inch overall length provides reach for deeper penetrations and through-block drilling\u003c\/li\u003e\n  \u003cli\u003eSDS-shank design compatible with SDS-plus rotary hammer chucks\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.1 pounds for easy single-handed bit changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement SDS masonry drill bit for use with standard SDS-plus rotary hammer tools on concrete, brick, block, and stone substrates.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by qualified tradespeople familiar with rotary hammer operation and applicable codes. Always verify the rotary hammer is set to the correct drilling mode and the chuck is fully seated before operation. Wear appropriate PPE including eye protection and hearing protection when drilling masonry. Inspect the bit for carbide tip damage or shank wear before each use and replace if cracking or deformation is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS-plus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 5\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 8-5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Style\u003c\/strong\u003e: Delta carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SDS4350-1562-8-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233196409138,"sku":"SDS4350-1562-8-D","price":15.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624035.png?v=1780093848"},{"product_id":"eagle-cutting-tool-tfz-25218-et-cobalt-universal-cutter","title":"Eagle Cutting Tool TFZ-25218-ET Cobalt Universal Cutter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TFZ-25218-ET is a cobalt universal cutter designed for demanding material removal in industrial and trade cutting applications. Built from cobalt high-speed steel, this cutter delivers increased heat and wear resistance compared to standard HSS tooling, making it well suited for harder workpiece materials and higher-feed operations. The cutting diameter is 9\/16 inches with a 2-inch length of cut, providing adequate reach for a range of slot milling, profiling, and general-purpose cutting tasks. Machinists, tool-and-die technicians, and skilled trade professionals working with manual or CNC milling equipment are the primary users of this tooling.\u003c\/p\u003e\u003cp\u003eThis universal cutter is intended for use in machine shop environments, maintenance departments, and production settings where versatile cutting geometry is required. The universal cutter profile accommodates a broad range of milling operations including angular cuts and form work. It is suited to both light-duty and moderate-duty applications across ferrous and non-ferrous materials. The cobalt alloy construction extends tool life in interrupted cuts and in materials that generate elevated cutting temperatures.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt high-speed steel construction for improved heat resistance and extended tool life\u003c\/li\u003e\n\u003cli\u003e9\/16-inch cutting diameter for precision slot and profile milling\u003c\/li\u003e\n\u003cli\u003e2-inch length of cut provides reach for deeper milling passes\u003c\/li\u003e\n\u003cli\u003eUniversal cutter geometry accommodates a variety of milling and form-cutting operations\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1, available as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard-arbor-mount universal cutter compatible with horizontal and universal milling machines accepting tooling of this diameter and geometry.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the milling machine spindle is fully stopped and power is locked out before mounting or removing the cutter. Use the correct arbor, collet, or adapter for a secure, concentric fit and verify cutter runout before beginning a cut. Follow applicable shop safety standards and machine manufacturer guidelines for tooling speed and feed recommendations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.97 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TFZ-25218-ET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233197359410,"sku":"TFZ-25218-ET","price":55.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307625117.png?v=1780093877"},{"product_id":"eagle-cutting-tool-ht-5000-13-p-i-hss-hand-plug-tap-1-2","title":"Eagle Cutting Tool HT-5000-13-P-I Hss Hand Plug Tap 1\/2","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL HT-5000-13-P-I is a 1\/2-13 high-speed steel hand plug tap designed for cutting internal threads in metal workpieces. The plug chamfer geometry — typically 3-5 threads of lead — makes this tap suited for through-holes and moderately deep blind holes where a gradual thread start is preferred. At 0.31 pounds, it is a lightweight, hand-driven tool that belongs in any machinist, pipefitter, or maintenance technician toolbox. HSS construction provides the hardness and wear resistance needed for tapping steel, cast iron, aluminum, and similar materials.\u003c\/p\u003e\n\u003cp\u003eThis tap is used in general manufacturing, maintenance and repair operations, and field service work wherever a 1\/2-13 UNC thread must be cut or restored. The 1\/2-13 thread designation refers to a 1\/2-inch nominal diameter with 13 threads per inch — a common unified coarse thread size found in structural fastening, machine bases, fixtures, and equipment frames. It is well suited for both shop use and on-site repair applications by millwrights, pipefitters, and industrial maintenance technicians.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2-13 UNC thread size for one of the most common unified coarse thread applications\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction for hardness and wear resistance across a range of base metals\u003c\/li\u003e\n  \u003cli\u003ePlug chamfer design balances cutting ease and thread engagement depth\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.31 pounds for comfortable hand-tap operation\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1, suitable for single-unit purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard hand plug tap for cutting 1\/2-13 UNC internal threads in through-holes and blind holes across common base metals including steel, cast iron, and aluminum.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tap is driven by hand using a tap wrench — never force it with power tools unless it is rated for machine use. Apply cutting fluid to reduce heat and extend tool life. Back the tap off a quarter turn periodically to break chips and prevent binding. Follow standard shop safety practices: secure the workpiece firmly before tapping and wear eye protection.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2-13 UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Hand Plug\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.31 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-5000-13-P-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233197556018,"sku":"HT-5000-13-P-I","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622871.png?v=1780093884"},{"product_id":"eagle-cutting-tool-1080-106-d-hss-drill-bit-1-3-32-in","title":"Eagle Cutting Tool 1080-106-D Hss Drill Bit 1-3\/32 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL 1080-106-D is a high speed steel (HSS) slow death (SD) drill bit built for professional cutting applications in metal, wood, and composite materials. At 1-3\/32 inches in diameter with a 1\/2-inch reduced shank, this bit seats securely in standard 1\/2-inch chuck drills and drill presses. Manufactured in the USA, it is designed for tradespeople and machinists who need consistent, repeatable hole quality in demanding production or field environments. High speed steel construction provides good heat resistance and edge retention under sustained use.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for use in metalworking shops, maintenance and repair operations, fabrication facilities, and general trade applications. The 1-3\/32-inch diameter makes it appropriate for tasks requiring a precision hole slightly larger than 1-1\/16 inch, such as bolt clearance holes, conduit knock-outs in light-gauge panels, or custom fabrication work. It is compatible with any 1\/2-inch keyed or keyless chuck drill press or handheld drill driver rated for the bit diameter.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-3\/32 inch cutting diameter for precision oversized hole applications\u003c\/li\u003e\n\u003cli\u003e1\/2 inch shank fits standard 1\/2-inch chuck equipment without a reducer\u003c\/li\u003e\n\u003cli\u003eHigh speed steel (HSS) construction for heat resistance and edge retention\u003c\/li\u003e\n\u003cli\u003eSlow death (SD) geometry for controlled cutting performance in ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with 1\/2-inch chuck drill presses and handheld drills; suitable as a direct replacement or addition for HSS slow death drill bit sets in that diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of this bit should be performed by a qualified machinist or tradesperson familiar with rotary cutting tools. Secure the shank fully in the chuck before operation and verify the bit runs true before cutting. Always wear appropriate eye protection and ensure the workpiece is clamped securely. Follow applicable OSHA and shop safety standards for rotating cutting equipment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-3\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1080-106-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233197687090,"sku":"1080-106-D","price":66.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307619637.png?v=1780093886"},{"product_id":"eagle-cutting-tool-tfz-24264-et-hss-universal-cutter","title":"Eagle Cutting Tool TFZ-24264-ET Hss Universal Cutter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TFZ-24264-ET is a high-speed steel (HSS) universal cutter designed for milling and profiling operations in metalworking and machining applications. With a 2-inch cutting diameter and a 2-inch length of cut (LOC), this cutter handles a range of material removal tasks on manual mills and CNC equipment. At 0.97 pounds, it is a compact, solid-construction tool suited for shop use by machinists, tool and die makers, and general metalworking trades. The HSS construction provides reliable performance across a broad range of work materials at standard cutting speeds.\u003c\/p\u003e\u003cp\u003eThis universal cutter is intended for horizontal and vertical milling machine setups where a standard arbor-mount profile cutter is required. It is well suited for production shops, maintenance machine shops, and toolroom environments handling steel, aluminum, and similar machinable metals. The 2-inch by 2-inch LOC geometry makes it appropriate for full-width slotting, side milling, and form-cutting passes where a larger engagement footprint is needed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction for durability across general metalworking applications\u003c\/li\u003e\n\u003cli\u003e2-inch cutting diameter with 2-inch length of cut (LOC) for broad material engagement\u003c\/li\u003e\n\u003cli\u003eUniversal cutter geometry compatible with standard arbor milling setups\u003c\/li\u003e\n\u003cli\u003eCompact weight of 0.97 pounds for easy handling and tool change\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use universal cutter for standard arbor-mount milling machine setups requiring a 2-inch diameter HSS profile cutter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists following standard milling machine setup procedures. Ensure the milling machine spindle is fully powered down and locked out before mounting or removing any arbor-mount cutter. Secure the cutter on the arbor with the appropriate spacers, collars, and draw bolt torqued per machine manufacturer specifications. Always inspect the cutter for chips or cracks before use and wear appropriate personal protective equipment during setup and operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.97 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TFZ-24264-ET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233197752626,"sku":"TFZ-24264-ET","price":140.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624906.png?v=1780093888"},{"product_id":"eagle-cutting-tool-s304-107-i-cobalt-jobber-drill-size-7","title":"Eagle Cutting Tool S304-107-I Cobalt Jobber Drill Size 7","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL S304-107-I is a size 7 cobalt jobber-length drill bit designed for general-purpose drilling in metal and other hard materials. Cobalt construction provides heat resistance and edge retention when cutting through ferrous metals, stainless steel, and other tough workpiece materials. The jobber-length geometry offers a practical balance of reach and rigidity, making it a standard choice for machinists, pipefitters, and maintenance technicians who drill frequently in production or field environments.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for use in both portable hand-held drills and bench-mounted drill presses. Size 7 corresponds to a specific fractional or wire gauge diameter in the numbered drill series, making it a common selection for clearance holes, tap drilling, and precision hole sizing in metal fabrication and mechanical assembly applications. It is typically used by machinists, industrial maintenance technicians, and trade professionals working in HVAC, plumbing, and electrical installations where metal drilling is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt steel construction for improved heat resistance and extended tool life in hard materials\u003c\/li\u003e\n  \u003cli\u003eJobber-length design provides standard reach suitable for most general drilling tasks\u003c\/li\u003e\n  \u003cli\u003eSize 7 numbered drill fits standard drill chucks and drill press setups\u003c\/li\u003e\n  \u003cli\u003eSuitable for drilling ferrous metals, stainless steel, and other hard materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard size 7 jobber-length drill bit compatible with typical 3-jaw drill chucks on portable drills and drill presses accepting numbered drill series bits.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eCobalt drill bits should be installed securely in a properly tightened drill chuck before use. Always wear appropriate eye protection when drilling. Use cutting fluid or coolant when drilling hard metals to extend bit life and improve hole quality. Ensure the workpiece is firmly clamped before beginning any drilling operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Size\u003c\/strong\u003e: 7 (numbered drill series)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Jobber length\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.4 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: S304-107-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233197949234,"sku":"S304-107-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623580.png?v=1780093894"},{"product_id":"eagle-cutting-tool-1212xl-024-i-hss-long-drill-bit","title":"Eagle Cutting Tool 1212XL-024-I Hss Long Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL 1212XL-024-I is a high-speed steel (HSS) long-series drill bit, commonly known as a Longboy, designed for drilling applications that require extended reach beyond the capacity of standard-length bits. With a 3\/8 inch diameter and a 12 inch overall length (OAL), this bit handles deep-hole drilling in metal, wood, and similar materials where shorter bits cannot reach. It is used by machinists, pipefitters, electricians, plumbers, and general tradespeople who need to bore through structural members, framing, or assemblies with significant depth.\u003c\/p\u003e\n\u003cp\u003eThis long-series drill bit is suited for residential and commercial trade applications where extended reach is required, such as drilling through wall studs, floor joists, or mechanical assemblies to route conduit, pipe, or fasteners. The 9 inch flute length provides maximum chip clearance during deep-hole operations, reducing the chance of bit binding or clogging. It is appropriate for use with standard 3\/8 inch drill chucks and compatible drilling equipment found on job sites and in shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction provides hardness and heat resistance for extended drilling cycles\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch diameter with 12 inch overall length delivers extended reach for deep-hole applications\u003c\/li\u003e\n  \u003cli\u003e9 inch flute length promotes efficient chip evacuation during deep-hole drilling\u003c\/li\u003e\n  \u003cli\u003eLong-series Longboy geometry designed for reaching through thick structural members or assemblies\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard 3\/8 inch drill chucks on corded and cordless drilling equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and general-use long-series drill bit suitable for standard 3\/8 inch drill chucks on corded and cordless drills used across mechanical, electrical, and plumbing trades.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by machinists, electricians, plumbers, pipefitters, and general tradespeople using standard drilling equipment. Ensure the drill chuck is fully tightened before operation and that the workpiece is secured to prevent movement. When drilling deep holes, back the bit out periodically to clear chips and prevent binding. Follow applicable safety standards and wear appropriate eye protection during all drilling operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1212XL-024-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233198080306,"sku":"1212XL-024-I","price":32.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307619964.png?v=1780093898"},{"product_id":"eagle-cutting-tool-cdw-40000-1-1-4-7-wet-core-drill","title":"Eagle Cutting Tool CDW-40000-1-1\/4-7 Wet Core Drill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL CDW-40000-1-1\/4-7 is a 4 inch wet core drill bit designed for cutting clean, precise holes through concrete, masonry, and similar hard materials. Wet core drilling uses water as a coolant and cutting aid, extending bit life and reducing airborne dust during operation. At 8.08 pounds, this is a substantial, professional-grade tool suited for licensed tradespeople working in commercial and residential construction. Electricians, plumbers, and HVAC techs commonly reach for wet core bits when penetrating concrete slabs, block walls, or foundation sections to route conduit, pipe, or ductwork.\u003c\/p\u003e\n\u003cp\u003eThis bit is well suited for trade applications that require a 4 inch bore through hard substrates. Typical scenarios include routing drain lines through concrete floors, sleeving conduit through block walls, or creating HVAC penetrations in poured concrete. The wet drilling method is preferred in occupied or enclosed spaces where dust control is a priority and where prolonged cutting runs demand consistent cooling to preserve the cutting segment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4 inch cutting diameter for standard pipe, conduit, and sleeve penetrations\u003c\/li\u003e\n  \u003cli\u003eWet cutting design reduces heat buildup and extends segment life\u003c\/li\u003e\n  \u003cli\u003eWater-assisted operation significantly lowers silica dust exposure during drilling\u003c\/li\u003e\n  \u003cli\u003eWeighs 8.08 pounds, built for professional-duty use\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1, available as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with wet core drilling machines that accept a 1-1\/4 inch by 7 thread (1-1\/4-7) arbor connection, which is a common standard thread size on professional core drill rigs used across electrical, plumbing, and HVAC trades.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eWet core drilling should be performed by a qualified tradesperson familiar with core drill rig setup and water feed systems. Ensure the drill rig is properly secured or anchored before operation to prevent bit walking or binding. Always establish a controlled water supply to the bit before beginning the cut, and never run a wet core bit dry as this will damage the cutting segments. Follow applicable OSHA silica dust guidelines and local codes when drilling in occupied structures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrilling Method\u003c\/strong\u003e: Wet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Connection\u003c\/strong\u003e: 1-1\/4-7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.08 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CDW-40000-1-1\/4-7\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233198211378,"sku":"CDW-40000-1-1\/4-7","price":223.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307621970.png?v=1780093903"},{"product_id":"eagle-cutting-tool-mt-160-200-b-i-hss-metric-bottom-tap","title":"Eagle Cutting Tool MT-160-200-B-I Hss Metric Bottom Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL MT-160-200-B-I is an M16.0 x 2.00 high-speed steel (HSS) metric bottom tap designed for threading blind holes to their full depth. Bottom taps carry minimal lead threads, allowing the cutting edge to reach the bottom of a hole where plug or taper taps cannot finish the thread. This tap cuts an M16 thread profile with a 2.00 mm pitch and is suited for use in metalworking, maintenance, and fabrication applications. Machinists, pipefitters, and general trade mechanics install this type of tap by hand or with a tap wrench on ferrous and non-ferrous metals.\u003c\/p\u003e\n\u003cp\u003eThis bottom tap is appropriate for through-hole and blind-hole threading operations on steel, cast iron, aluminum, and similar metals where a complete M16 x 2.00 metric thread is required. It is commonly used in manufacturing, repair shops, and field service work when a full-depth internal thread is needed close to the bottom of a drilled hole. The import designation reflects the sourcing of the tap and makes it a cost-effective option for general-purpose threading tasks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM16.0 x 2.00 metric thread profile for standard metric fastener compatibility\u003c\/li\u003e\n  \u003cli\u003eBottom tap geometry with minimal lead threads for threading to the base of blind holes\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction for durability across ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1, suitable for single-unit purchase\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.38 pounds for easy handling and tap wrench use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard M16.0 x 2.00 metric bottom tap compatible with any application requiring a full-depth internal metric thread in that size and pitch.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBottom taps should only be used after a plug or taper tap has been run through the hole to establish the thread. Always ensure the workpiece is secured before tapping, and use an appropriate cutting fluid to extend tap life and improve thread quality. Power down any machinery and secure the workpiece before beginning hand-tapping operations. Follow applicable shop safety standards when working with cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M16.0 x 2.00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Bottom\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.38 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MT-160-200-B-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233198342450,"sku":"MT-160-200-B-I","price":27.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623501.png?v=1780093907"},{"product_id":"eagle-cutting-tool-1090d-104-i-dyno-brad-point-drill-bit","title":"Eagle Cutting Tool 1090D-104-I Dyno Brad Point Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL 1090D-104-I is a Dyno-series brad point drill bit designed for clean, accurate boring in wood and wood-composite materials. With a 1-1\/16 inch cutting diameter and a 1\/2 inch shank, this bit seats securely in standard half-inch chucks on corded drills, drill presses, and benchtop boring machines. The brad point tip centers on the workmark without walking, producing a flat-bottomed entry hole with minimal tearout on the exit face. Carpenters, millworkers, cabinet installers, and general contractors reach for this profile when hole location and edge quality matter more than speed.\u003c\/p\u003e\u003cp\u003eThis bit is suited for residential and light commercial woodworking applications where a precise, clean-walled hole is required. Typical uses include cabinet hinge boring, shelf-pin drilling, dowel location, and through-hole work in dimensional lumber, plywood, and MDF. The import designation indicates offshore manufacture, making it a cost-effective option for production work or job-site use where bit turnover is expected.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-1\/16 inch cutting diameter for standard through-hole and hinge applications\u003c\/li\u003e\n\u003cli\u003e1\/2 inch shank fits common drill chucks and press collets without a reducer\u003c\/li\u003e\n\u003cli\u003eBrad point tip centers on layout marks and reduces wandering on entry\u003c\/li\u003e\n\u003cli\u003eFlat-bottomed hole profile minimizes tearout on wood and wood composites\u003c\/li\u003e\n\u003cli\u003eDyno-series designation indicates a general-purpose, production-ready geometry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard replacement or stocking brad point drill bit compatible with any 1\/2 inch chuck drill press, handheld corded drill, or boring machine accepting straight-shank bits.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed by woodworking professionals and general tradespeople using standard drill presses or handheld drills. Always secure the workpiece with clamps or a vise before drilling to prevent rotation and splintering. Reduce feed pressure as the tip exits the material to minimize tearout on the back face. Inspect the brad point tip before each use and remove from service if the tip or spurs are chipped or dull.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-1\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1090D-104-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233198801202,"sku":"1090D-104-I","price":39.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307619883.png?v=1780093923"},{"product_id":"eagle-cutting-tool-1080-060-d-hss-drill-bit-15-16-in","title":"Eagle Cutting Tool 1080-060-D Hss Drill Bit 15\/16 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL 1080-060-D is a 15\/16-inch high-speed steel (HSS) slow-spiral drill bit with a 1\/2-inch straight shank, manufactured in the USA. Slow-spiral (SD) geometry reduces cutting speed to improve chip evacuation and heat control when drilling softer materials such as wood, plastics, and soft metals. The 1\/2-inch shank seats securely in standard drill chucks and magnetic drill press tooling. This bit is suited for production drilling, maintenance work, and fabrication applications where a consistent, clean bore is required. Machinists, millwrights, ironworkers, and general fabricators are the primary users.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for use in drill presses, magnetic drills, and heavy-duty handheld drills equipped with a 1\/2-inch or larger chuck. The 15\/16-inch diameter is a common size in structural and mechanical fabrication, including hole preparation for bolts, conduit knock-outs, and bushing installations. It performs well in shop environments handling repetitive through-hole drilling in wood, aluminum, copper, brass, and mild steel stock.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e15\/16-inch cutting diameter for common structural and mechanical hole sizes\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction for durability across a range of materials\u003c\/li\u003e\n\u003cli\u003eSlow-spiral (SD) flute geometry promotes chip clearing and reduces heat buildup\u003c\/li\u003e\n\u003cli\u003e1\/2-inch straight shank fits standard drill chucks and magnetic drill press collets\u003c\/li\u003e\n\u003cli\u003eUSA manufactured\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or stock drill bit for any drill press, magnetic drill, or heavy-duty handheld drill accepting a 1\/2-inch straight-shank bit.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall and remove drill bits only when the drill or drill press is fully powered down and the chuck is at rest. Secure the shank fully into the chuck and tighten with a chuck key before operation. Wear appropriate eye protection and secure the workpiece before drilling. Follow applicable shop safety standards and employer guidelines for rotating cutting tools.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 15\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Slow Spiral (SD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.69 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1080-060-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233198866738,"sku":"1080-060-D","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307619650.png?v=1780093925"},{"product_id":"eagle-cutting-tool-tdd50-4036s-alt-d-4-flute-end-mill","title":"Eagle Cutting Tool TDD50-4036S-ALT-D 4 Flute End Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TDD50-4036S-ALT-D is a 9\/16 inch diameter solid carbide end mill designed for precision metal removal in demanding machining applications. It features a 4-flute geometry with a corner chamfer profile and a single-end configuration. The cutting edges are coated with AlTiN (aluminum titanium nitride), a hard physical vapor deposition coating that extends tool life at elevated cutting temperatures. This tool carries a 9\/16 inch shank diameter and is manufactured in the USA to close dimensional tolerances for consistent performance in CNC and manual milling operations.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling ferrous and hardened materials including alloy steels, tool steels, and cast iron where heat resistance and edge retention are priorities. The corner chamfer geometry makes it appropriate for applications requiring a chamfered edge profile at the base of a feature, reducing stress concentrations and eliminating sharp corners on finished workpieces. It is typically installed and operated by machinists and tooling specialists in job shop, production, and maintenance machining environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN coating provides high-temperature hardness and oxidation resistance for extended tool life in ferrous materials\u003c\/li\u003e\n\u003cli\u003e4-flute design balances chip evacuation and surface finish in finishing and light roughing passes\u003c\/li\u003e\n\u003cli\u003eCorner chamfer cutting profile for chamfered-edge features in a single operation\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and dimensional stability under high cutting loads\u003c\/li\u003e\n\u003cli\u003e9\/16 inch cutting diameter matched to 9\/16 inch shank for direct collet or end mill holder mounting\u003c\/li\u003e\n\u003cli\u003eSingle-end configuration; manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers and manual mills accepting a 9\/16 inch straight shank end mill holder or collet chuck.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's toolholder torque and runout specifications. Ensure the spindle is fully stopped and the machine is in a safe, de-energized state before changing tooling. Seat the shank fully in the collet or end mill holder to the recommended engagement depth before tightening. Verify runout with a dial indicator before commencing cuts to protect both the tool and the workpiece.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Geometry\u003c\/strong\u003e: Corner Chamfer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (Aluminum Titanium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.42 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TDD50-4036S-ALT-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233199227186,"sku":"TDD50-4036S-ALT-D","price":89.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624821.png?v=1780093933"},{"product_id":"eagle-cutting-tool-mhd-030-050-i-metric-hex-die","title":"Eagle Cutting Tool MHD-030-050-I Metric Hex Die","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL MHD-030-050-I is a carbon steel metric hex die sized for M3.00 threads with a 0.50 mm pitch. Hex dies are held in a die stock handle and turned by hand to cut external threads onto rod, bolt blanks, or cylindrical stock. This import-grade die suits maintenance, repair, and fabrication work where standard metric threads must be cut or restored. The hex body style allows a standard wrench to back off the die when needed. Machinists, maintenance techs, and trade professionals working with M3 fasteners will find this a practical addition to their threading kit.\u003c\/p\u003e\n\u003cp\u003eThis die is designed for cutting M3.00x0.50 external metric threads on metal stock. It fits common hex die stock handles sized for this die body. Typical applications include threading small-diameter rod and restoring damaged threads on machine screws, bolts, and fittings in light manufacturing, HVAC equipment assembly, electrical panel work, and general mechanical maintenance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM3.00x0.50 thread form for standard metric fastener sizing\u003c\/li\u003e\n  \u003cli\u003eHex body design compatible with standard die stock wrenches\u003c\/li\u003e\n  \u003cli\u003eCarbon steel construction for cutting threads on mild steel and similar materials\u003c\/li\u003e\n  \u003cli\u003eImport-grade pricing suits high-volume shop use and tool crib stocking\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1 for flexible purchasing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard hex die stock handles sized to accept an M3.00x0.50 hex die body. Suitable for threading mild steel, aluminum, brass, and similar machinable materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the workpiece firmly in a vise before threading. Apply cutting oil to the die and stock before beginning to reduce friction and improve thread quality. Turn the die stock steadily and back off a quarter turn periodically to break chips. Inspect the finished thread with a metric M3.00x0.50 gauge or mating fastener before assembly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M3.00x0.50\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Metric external\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDie Style\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbon steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.48 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MHD-030-050-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233199292722,"sku":"MHD-030-050-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623314.png?v=1780093935"},{"product_id":"eagle-cutting-tool-ht-6250-11-b-d-5-8-11-hss-bottom-tap","title":"Eagle Cutting Tool HT-6250-11-B-D 5\/8-11 Hss Bottom Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL HT-6250-11-B-D is a 5\/8-11 high-speed steel (HSS) hand bottom tap manufactured in the USA. Bottom taps are ground with minimal chamfer on the leading threads, allowing the tap to cut threads as close to the bottom of a blind hole as possible. This tool is driven by hand using a standard tap wrench and is suited for threading operations in metal fabrication, maintenance, and repair work. At 0.32 pounds, it is a compact, single-piece cutting tool designed for controlled, precise thread-cutting in through holes and blind holes alike.\u003c\/p\u003e\n\u003cp\u003eThe HT-6250-11-B-D is used wherever a 5\/8-11 UNC thread must be cut or restored in a blind hole application. Typical scenarios include threading bolt holes in machinery, equipment frames, and structural components during fabrication or field repair. Machinists, millwrights, pipefitters, and maintenance technicians reach for a bottom tap when a taper or plug tap has already established the thread and the full depth of the blind hole must be threaded out. It is equally useful for chasing and restoring damaged 5\/8-11 threads.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom chamfer geometry threads to within 1-2 threads of blind hole bottom\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction provides hardness and wear resistance for threading steel, iron, and aluminum\u003c\/li\u003e\n  \u003cli\u003e5\/8-11 UNC thread form for standard unified coarse-thread applications\u003c\/li\u003e\n  \u003cli\u003eUSA manufactured for consistent dimensional accuracy and cutting geometry\u003c\/li\u003e\n  \u003cli\u003eHand-drive design compatible with standard tap wrenches and T-handles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any application requiring a 5\/8-11 UNC hand bottom tap, including blind hole threading and thread restoration in ferrous and non-ferrous metals.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tap is a hand-drive cutting tool installed by a machinist or maintenance technician using a tap wrench. Secure the workpiece firmly before tapping and apply a suitable cutting fluid to extend tool life and improve thread finish. Back the tap off periodically to break chips, especially in blind holes, to prevent tap breakage. Follow standard shop safety practices including eye protection whenever cutting tools are in use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 5\/8-11 UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Hand Bottom Tap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-6250-11-B-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233199358258,"sku":"HT-6250-11-B-D","price":32.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623044.png?v=1780093937"},{"product_id":"eagle-cutting-tool-sc400-014-i-cobalt-stub-drill-7-32","title":"Eagle Cutting Tool SC400-014-I Cobalt Stub Drill 7\/32","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL SC400-014-I is a 7\/32 inch cobalt stub drill designed for drilling through hard metals, stainless steel, and other tough materials where standard high-speed steel bits fall short. The cobalt construction provides increased heat resistance and edge retention, making it suited for production environments and repetitive drilling tasks. Its stub-length body offers added rigidity compared to jobber-length bits, reducing deflection and improving accuracy in tight-clearance situations. This drill is an import-grade option intended for trade professionals and shop technicians who need a reliable cobalt bit at a practical price point.\u003c\/p\u003e\u003cp\u003eThis stub drill is appropriate for metalworking applications in fabrication shops, HVAC equipment assembly, plumbing fixture work, and general mechanical trade use. The 7\/32 inch diameter is commonly used for tapping pilot holes and clearance holes in ferrous and non-ferrous metals. Its shorter flute length makes it well-suited for drill press and handheld power tool use where chuck clearance or workpiece depth limits the use of longer drill geometries.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt construction for improved heat resistance and edge retention in hard materials\u003c\/li\u003e\n\u003cli\u003eStub-length body provides greater rigidity and reduced deflection versus jobber-length bits\u003c\/li\u003e\n\u003cli\u003e7\/32 inch diameter suits common pilot and clearance hole applications\u003c\/li\u003e\n\u003cli\u003eImport-grade cobalt bit offering a cost-effective option for trade and shop use\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1 for flexible purchasing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 7\/32 inch stub-length cobalt drill bit compatible with conventional drill chucks used in handheld power drills and drill presses across metalworking and trade applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis drill bit is installed and operated by machinists, fabricators, and trade professionals using standard drill chucks. Always secure the workpiece firmly before drilling and use appropriate cutting fluid when drilling hard or stainless steel to extend bit life and reduce heat buildup. Inspect the cutting edges before use and replace the bit if chipping or dullness is observed, as a compromised edge increases heat and reduces hole quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 7\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Type\u003c\/strong\u003e: Stub Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SC400-014-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233199915314,"sku":"SC400-014-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623827.png?v=1780093948"},{"product_id":"eagle-cutting-tool-pt-25000-8-i-hss-npt-pipe-tap","title":"Eagle Cutting Tool PT-25000-8-I Hss Npt Pipe Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL PT-25000-8-I is a 2-1\/2-inch, 8 TPI high-speed steel (HSS) NPT pipe tap designed for cutting tapered pipe threads in ferrous and non-ferrous materials. Built to National Pipe Taper (NPT) standards, this tap produces leak-resistant threaded connections in pipe fittings, valves, manifolds, and related plumbing and HVAC components. The 2-1\/2-inch nominal size and 8 threads-per-inch pitch make this a large-diameter tap suited for heavy-duty piping work. HSS construction provides the toughness and wear resistance needed for production tapping and field use. Plumbers, pipefitters, and HVAC mechanics working on commercial and industrial piping systems are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis tap is suited for threading pipe entry points in steel, iron, brass, and aluminum where NPT tapered threads are specified. Typical applications include threading ports on valve bodies, pipe unions, pump housings, and heavy-wall conduit fittings. The large 2-1\/2-inch size is most common in commercial mechanical rooms, industrial process piping, and large HVAC hydronic systems where full-size pipe tapping is required. It is classified as an import-grade tool, appropriate for lower-frequency production runs or job-site use where cost-efficiency is a priority.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS construction provides durability and resistance to heat generated during tapping operations\u003c\/li\u003e\n  \u003cli\u003eNPT tapered thread form produces leak-resistant pipe connections per ANSI standards\u003c\/li\u003e\n  \u003cli\u003e2-1\/2-inch nominal diameter with 8 TPI pitch for large-diameter pipe threading\u003c\/li\u003e\n  \u003cli\u003eImport-grade classification offers a cost-effective option for periodic or non-production use\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard tap wrenches and machine tapping setups sized for large-diameter taps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any application requiring a 2-1\/2-8 NPT tapered pipe thread. Fits standard tap wrenches and tapping machines capable of accepting large-diameter HSS pipe taps.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePipe taps of this size are typically driven by a licensed pipefitter or plumber using a heavy-duty tap wrench or machine tapping setup. Always apply cutting fluid rated for the material being tapped to extend tap life and improve thread quality. Ensure the workpiece is securely fixtured before beginning the tapping operation to prevent tap breakage. Follow applicable code requirements such as IFGC or IPC for threaded pipe connections in gas or plumbing systems.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT (National Pipe Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Pipe Size\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThreads Per Inch (TPI)\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT-25000-8-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233200472370,"sku":"PT-25000-8-I","price":581.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623562.png?v=1780093961"},{"product_id":"eagle-cutting-tool-ac712-028-i-cobalt-aircraft-drill-7-16-x-12-in","title":"Eagle Cutting Tool AC712-028-I Cobalt Aircraft Drill 7\/16 X 12 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL AC712-028-I is a cobalt aircraft extension drill bit designed for drilling through metal in tight or deep-reach applications. With a 7\/16-inch diameter and a 12-inch overall length (OAL), this bit provides the extended reach required for structural and mechanical work where standard-length drills cannot access the bore location. The cobalt construction offers improved heat and wear resistance compared to standard high-speed steel, making it suitable for harder metals encountered in HVAC, sheet metal, and mechanical contracting work. Trade professionals including HVAC installers, sheet metal workers, and pipefitters keep extended cobalt bits on hand for field drilling tasks.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for applications requiring deep-reach drilling in ferrous and non-ferrous metals. Common uses include drilling through structural framing, HVAC duct supports, electrical enclosures, and plumbing hangers where the work surface is recessed or obstructed. The 12-inch OAL gives the operator clearance to drill through assemblies without interference from surrounding structure. It is appropriate for both shop and field use in residential and light commercial trade work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt construction resists heat buildup during extended drilling in hard metals\u003c\/li\u003e\n\u003cli\u003e7\/16-inch diameter suits common structural and mechanical hole sizes\u003c\/li\u003e\n\u003cli\u003e12-inch overall length provides deep-reach access in confined or obstructed areas\u003c\/li\u003e\n\u003cli\u003eImport-grade pricing suitable for high-turnover field use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank aircraft extension cobalt drill bit compatible with 3\/8-inch and 1\/2-inch chuck portable drills and drill presses accepting reduced or straight-shank bits of this diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eUse with a variable-speed drill and apply consistent feed pressure to avoid work hardening when drilling harder alloys. Secure the workpiece before drilling to prevent movement and bit breakage. Wear appropriate eye protection per OSHA general industry standards. Allow the bit to cool between extended drilling cycles to preserve the cutting edge.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: AC712-028-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233201127730,"sku":"AC712-028-I","price":40.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307620216.png?v=1780093978"},{"product_id":"eagle-cutting-tool-s304-121-i-cobalt-jobber-drill-size-21","title":"Eagle Cutting Tool S304-121-I Cobalt Jobber Drill Size 21","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL S304-121-I is a size 21 cobalt jobber-length drill bit built for drilling through hard and abrasion-resistant materials. Cobalt construction gives the bit higher heat resistance than standard high-speed steel, making it suitable for demanding applications where bit temperatures rise quickly. Jobber-length geometry provides a balance of reach and rigidity for general-purpose drilling in a wide range of materials. This type of bit is typically used by machinists, pipefitters, electricians, and plumbers who drill through harder stock on the job site or in the shop.\u003c\/p\u003e\n\u003cp\u003eThe S304-121-I is sized at drill number 21 and is appropriate for use in hand-held power drills, drill presses, and similar equipment. It is well suited for drilling through ferrous metals, stainless steel, cast iron, and other hard materials encountered in mechanical and trade work. The jobber-length design makes it compatible with standard three-jaw chucks commonly found in portable and benchtop drilling equipment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction for improved heat resistance compared to standard HSS bits\u003c\/li\u003e\n  \u003cli\u003eJobber-length geometry balances reach and rigidity for general-purpose use\u003c\/li\u003e\n  \u003cli\u003eSize 21 drill diameter for precise hole sizing in trade applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard three-jaw drill chucks\u003c\/li\u003e\n  \u003cli\u003eSuitable for ferrous metals, stainless, and other hard materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard-use cobalt jobber drill bit for use in hand-held power drills and drill presses accepting standard three-jaw chucks.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall the bit securely in the chuck and verify it is fully seated before drilling. Always power down and disconnect or unplug the drill before changing bits. Use appropriate cutting fluid when drilling through hard metals to extend bit life and manage heat buildup. Follow applicable shop safety practices and wear eye protection during use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Size\u003c\/strong\u003e: 21\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Type\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.4 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: S304-121-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233201586482,"sku":"S304-121-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307623636.png?v=1780093993"},{"product_id":"eagle-cutting-tool-tfz-25292-et-cobalt-annular-cutter","title":"Eagle Cutting Tool TFZ-25292-ET Cobalt Annular Cutter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL TFZ-25292-ET is a cobalt annular cutter designed for cutting clean, accurate holes in steel and other ferrous metals. With a 2.875-inch cutting diameter and a 2-inch depth of cut, this cutter is built for demanding hole-making applications on structural steel, plate, and fabricated assemblies. The cobalt construction provides heat and wear resistance that outlasts standard high-speed steel tooling under continuous or high-feed cutting conditions. It is used primarily by ironworkers, steel fabricators, and maintenance machinists working with magnetic drill presses or dedicated annular cutter setups.\u003c\/p\u003e\n\u003cp\u003eThis annular cutter is suited for production and job-site applications where a full-sized twist drill would be inefficient or impractical. The 2-inch depth of cut accommodates thick structural members and stacked plate work. Its design produces a solid core slug rather than chips, reducing the power draw on the host drill and minimizing material waste. Typical applications include beam drilling, pipe flange fabrication, structural steel erection, and heavy equipment repair.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction for extended tool life in ferrous metal cutting\u003c\/li\u003e\n  \u003cli\u003e2.875-inch cutting diameter for large-diameter hole applications\u003c\/li\u003e\n  \u003cli\u003e2-inch depth of cut accommodates thick plate and structural steel\u003c\/li\u003e\n  \u003cli\u003eAnnular cutting geometry reduces power consumption compared to solid twist drills\u003c\/li\u003e\n  \u003cli\u003eProduces a solid core slug for cleaner hole entry and exit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard fitment annular cutter for magnetic drill presses and annular cutter arbors accepting cutters of this diameter and shank configuration.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eAnnular cutters are installed by qualified machinists, ironworkers, or fabricators using a compatible magnetic drill press or milling machine arbor. Ensure the cutter shank is fully seated and secured in the arbor before operation, and confirm the magnetic base is firmly engaged on a clean, flat steel surface. Use the recommended cutting fluid or lubricant for the material being drilled to extend tool life and maintain cut quality. Inspect the cutter for chipped or worn teeth before each use and do not exceed the rated depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 2.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TFZ-25292-ET\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233201652018,"sku":"TFZ-25292-ET","price":412.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307625181.png?v=1780093995"},{"product_id":"eagle-cutting-tool-1090d-063-i-drill-bit-63-64-inch","title":"Eagle Cutting Tool 1090D-063-I Drill Bit 63\/64 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL 1090D-063-I is a 63\/64-inch diameter drill bit with a 1\/2-inch shank, designed for use in standard drill chucks across a range of drilling applications. The DYNO B G designation indicates a bright-ground finish, which reduces friction and aids in chip evacuation during drilling. This bit is suited for trade professionals and contractors who need reliable, consistent cutting performance on the job site or in the shop. At 0.69 pounds, it is a solid, full-size bit built for production and maintenance drilling tasks.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is appropriate for use in residential and commercial construction, fabrication, and maintenance applications where a near-1-inch bore is required. The 1\/2-inch shank makes it compatible with standard 1\/2-inch drill chucks on corded and heavy-duty cordless drills. It is commonly used by electricians, plumbers, HVAC technicians, and general contractors who need to drill large-diameter holes through wood, light metal, or similar materials during rough-in and installation work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e63\/64-inch cutting diameter for near-1-inch bore applications\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch shank fits standard 1\/2-inch drill chucks\u003c\/li\u003e\n  \u003cli\u003eBright-ground finish reduces friction and aids chip clearance\u003c\/li\u003e\n  \u003cli\u003eMinimum order quantity of 1 unit\u003c\/li\u003e\n  \u003cli\u003eWeighs 0.69 pounds for full-size, production-grade construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and general-use drill bit compatible with standard 1\/2-inch drill chucks on corded drills, drill presses, and heavy-duty cordless platforms.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of this bit requires a drill or drill press with a 1\/2-inch chuck capable of handling large-diameter bits. Secure the shank fully in the chuck before operation and verify the chuck is tightened with a chuck key where applicable. Always wear appropriate eye protection and secure the workpiece before drilling. Follow applicable workplace safety standards and manufacturer guidelines for drilling speeds based on material type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 63\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Size\u003c\/strong\u003e: 1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright Ground\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.69 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 1090D-063-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233201914162,"sku":"1090D-063-I","price":34.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307619896.png?v=1780094000"},{"product_id":"eagle-cutting-tool-t500-018-i-hss-ti-coated-jobber-drill-9-32","title":"Eagle Cutting Tool T500-018-I Hss Ti-coated Jobber Drill 9\/32","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL T500-018-I is a 9\/32-inch high-speed steel jobber-length drill bit with a titanium nitride (TiN) coating. The TiN coating increases surface hardness and reduces friction, extending tool life compared to uncoated HSS bits. Jobber-length geometry provides a balanced combination of reach and rigidity, making this bit suitable for general-purpose drilling in metal, wood, and plastics. It is a standard import-grade bit intended for production shops, maintenance technicians, and trade professionals who need reliable everyday tooling without the cost of premium domestic stock.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for use in hand drills, drill presses, and CNC drilling applications where a 9\/32-inch diameter hole is required. Common applications include drilling pilot holes, clearance holes for fasteners, and through-holes in light structural and sheet metal fabrication. The 9\/32-inch size corresponds to a standard fractional diameter frequently used in mechanical and electrical trade work for conduit support hardware, bracket mounting, and general assembly tasks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e9\/32-inch diameter jobber-length geometry for general-purpose drilling\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction for heat and wear resistance\u003c\/li\u003e\n\u003cli\u003eTitanium nitride (TiN) coating increases surface hardness and reduces cutting friction\u003c\/li\u003e\n\u003cli\u003eCompatible with standard drill chucks accepting straight-shank bits\u003c\/li\u003e\n\u003cli\u003eMinimum order quantity of 1, available as a single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard straight-shank jobber drill bit compatible with any drill press, hand drill, or CNC spindle chuck accepting a 9\/32-inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of this drill bit is performed by a machinist, fabricator, or trade technician using a compatible drill chuck. Ensure the drill press or hand drill is powered off and the chuck key is removed before changing bits. Use appropriate cutting fluid or lubricant when drilling ferrous metals to maintain coating integrity and extend bit life. Secure the workpiece firmly before drilling to prevent movement and bit breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 9\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBit Type\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: T500-018-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233202241842,"sku":"T500-018-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624337.png?v=1780094008"},{"product_id":"eagle-cutting-tool-sds4350-12500-23-d-sds-plus-drill-bit","title":"Eagle Cutting Tool SDS4350-12500-23-D Sds Plus Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL SDS4350-12500-23-D is a heavy-duty SDS Plus shank rotary hammer drill bit designed for high-impact masonry and concrete drilling applications. With a 1-1\/4 inch cutting diameter and an overall length of 23-1\/2 inches, this bit handles deep anchor holes, through-wall penetrations, and structural boring tasks that shorter bits cannot reach. The SDS Plus shank locks into compatible rotary hammer chucks for efficient hammering and rotation, making it a practical choice for contractors and tradespeople working in concrete, block, and reinforced masonry.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for commercial and residential construction applications where deep, large-diameter holes are required. Typical uses include setting anchor bolts, running conduit sleeves through concrete walls, and drilling for pipe penetrations. The extended 23-1\/2 inch overall length allows single-pass drilling through thick structural slabs and masonry walls without requiring extensions. Electricians, plumbers, and general contractors routinely use bits in this class for core-adjacent drilling and rough-in work on concrete structures.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/4 inch cutting diameter for large-bore masonry and concrete holes\u003c\/li\u003e\n  \u003cli\u003e23-1\/2 inch overall length enables deep single-pass drilling without extensions\u003c\/li\u003e\n  \u003cli\u003eSDS Plus shank provides positive chuck engagement and efficient impact energy transfer\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with SDS Plus rotary hammers standard in the trade\u003c\/li\u003e\n  \u003cli\u003eHeavyweight construction at 4.5 pounds supports durability in demanding applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and general-use SDS Plus drill bit compatible with standard SDS Plus rotary hammer chucks across major tool platforms used in the trade.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by licensed electricians, plumbers, or general contractors using a compatible SDS Plus rotary hammer. Before drilling, confirm the work area is clear of embedded conduit, rebar, or utility lines using a wall scanner. Insert the bit fully into the SDS Plus chuck until it locks, and verify seating before applying load. Follow applicable local building codes and OSHA standards for dust control when drilling concrete or masonry.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: SDS Plus\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 23-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SDS4350-12500-23-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233202438450,"sku":"SDS4350-12500-23-D","price":87.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307624038.png?v=1780094013"},{"product_id":"eagle-cutting-tool-a712-014-i-hss-aircraft-drill-7-32","title":"Eagle Cutting Tool A712-014-I Hss Aircraft Drill 7\/32","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL A712-014-I is a high-speed steel (HSS) aircraft extension drill bit designed for drilling in tight or deep-reach applications where a standard-length bit cannot access the work area. With a diameter of 7\/32 inches and an overall length (OAL) of 12 inches, this bit provides the extended reach needed for structural, sheet metal, and aerospace-style drilling tasks. Licensed HVAC techs, sheet metal fabricators, plumbers, and general tradespeople keep extended-length bits like this in rotation for drilling through framing, ductwork flanges, and structural members where angle or depth makes standard bits impractical.\u003c\/p\u003e\n\u003cp\u003eThis aircraft drill bit is suited for use in residential and light commercial construction, mechanical trades, and fabrication environments. The extended 12-inch OAL makes it particularly useful when drilling through wall assemblies, floor joists, or deep channel stock. It is compatible with standard drill chucks that accept a 7\/32-inch shank. This is an import-grade bit intended for general trade use where production volume or cost per hole is a factor.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel (HSS) construction for durability across wood, light metal, and composite materials\u003c\/li\u003e\n  \u003cli\u003e7\/32-inch diameter for precise hole sizing in standard trade applications\u003c\/li\u003e\n  \u003cli\u003e12-inch overall length provides extended reach in confined or deep-access drilling scenarios\u003c\/li\u003e\n  \u003cli\u003eAircraft-style extended length for use where standard bits cannot reach\u003c\/li\u003e\n  \u003cli\u003eImport-grade construction offers a cost-effective option for general-purpose trade use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an extended-length replacement or supplemental drill bit for use in standard keyed or keyless drill chucks accepting a 7\/32-inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by general tradespeople, sheet metal mechanics, and construction professionals using corded or cordless drills and drill presses. Ensure the chuck is fully tightened and the bit is running true before engaging the workpiece. Reduce feed pressure when drilling through hard materials to extend bit life and prevent breakage. Always wear appropriate eye protection when drilling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 7\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: A712-014-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233202700594,"sku":"A712-014-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307620093.png?v=1780094019"},{"product_id":"eagle-cutting-tool-c300-020-d-cobalt-jobber-5-16-inch","title":"Eagle Cutting Tool C300-020-D Cobalt Jobber 5\/16 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL C300-020-D is a 5\/16-inch cobalt jobber-length drill bit manufactured in the USA. Cobalt construction provides superior heat resistance and hardness compared to standard high-speed steel, making this bit well-suited for drilling through tough materials such as stainless steel, cast iron, hardened alloys, and other hard metals. The jobber-length geometry offers a balanced combination of reach and rigidity, which is the standard configuration used by trade professionals across mechanical, electrical, and plumbing work for general-purpose hole-making tasks.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for use in residential and commercial trade applications where hard or abrasive materials are encountered. It is commonly used by electricians drilling through metal studs or enclosures, plumbers boring through metal pipe supports or brackets, and HVAC technicians drilling into sheet metal or equipment housings. The 5\/16-inch diameter is a frequently used size for bolt clearance holes, conduit anchors, and similar fastening applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt construction for enhanced heat and wear resistance in hard-metal drilling\u003c\/li\u003e\n\u003cli\u003e5\/16-inch diameter in standard jobber length for versatile reach and stability\u003c\/li\u003e\n\u003cli\u003eUSA manufactured\u003c\/li\u003e\n\u003cli\u003eSuitable for stainless steel, cast iron, hardened alloys, and similar materials\u003c\/li\u003e\n\u003cli\u003eCompatible with standard drill chucks and drill presses used in trade work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 5\/16-inch jobber-length drill bit compatible with any drill press or handheld drill accepting a 5\/16-inch or larger keyed or keyless chuck.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCobalt drill bits should be used with appropriate cutting fluid or lubricant when drilling hard metals to extend bit life and maintain hole quality. Always secure the workpiece before drilling and wear appropriate eye protection. Use the lowest effective RPM for hard or thick materials to prevent overheating. This bit should be installed and operated by qualified trade professionals following applicable workplace safety standards.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Type\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C300-020-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233202864434,"sku":"C300-020-D","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307620633.png?v=1780094023"},{"product_id":"eagle-cutting-tool-tse500-sp1-i-spiral-screw-extractor","title":"Eagle Cutting Tool TSE500-SP1-I Spiral Screw Extractor","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL TSE500-SP1-I is a Size 1 spiral screw extractor designed to remove broken, stripped, or seized fasteners from metal, wood, and plastic workpieces. The spiral flute design bites into the damaged fastener as it is turned counterclockwise, drawing the extractor deeper for a secure grip and controlled removal. At 0.2 pounds, this is a compact, single-piece tool suited for use by machinists, plumbers, electricians, HVAC technicians, and general maintenance professionals who regularly deal with fastener failures.\u003c\/p\u003e\u003cp\u003eThe TSE500-SP1-I is used wherever a fastener head has been damaged beyond the reach of a standard driver or where a bolt or stud has broken flush with or below the surface. Typical applications include removing broken machine screws, damaged set screws, and snapped studs in equipment housings, pipe fittings, junction boxes, and HVAC components. The Size 1 designation targets smaller-diameter fasteners, making it a go-to choice for precision work in tight spaces.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpiral flute geometry grips damaged fasteners under counterclockwise torque\u003c\/li\u003e\n\u003cli\u003eSize 1 for smaller-diameter broken or stripped fasteners\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.2 pounds for easy handling and portability\u003c\/li\u003e\n\u003cli\u003eCompatible with standard T-handle, tap wrench, or drill chuck drives\u003c\/li\u003e\n\u003cli\u003eSuitable for use in metal, wood, and plastic substrates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose Size 1 spiral screw extractor for use with standard T-handle wrenches, tap wrenches, or drill chucks in typical fastener removal applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eDe-energize or shut off equipment before attempting fastener removal in any electrical, HVAC, or plumbing application. A center punch and drill are typically used to create a pilot hole in the broken fastener before seating the extractor. Apply steady, controlled counterclockwise torque to avoid snapping the extractor in the workpiece. Follow applicable trade codes and manufacturer guidelines for the equipment being serviced.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TSE500-SP1-I\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233202929970,"sku":"TSE500-SP1-I","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307625343.png?v=1780094025"},{"product_id":"eagle-cutting-tool-ht-3750-16-b-d-3-8-16-hss-hand-bottom-tap","title":"Eagle Cutting Tool HT-3750-16-B-D 3\/8-16 Hss Hand Bottom Tap","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EAGLE CUTTING TOOL HT-3750-16-B-D is a 3\/8-16 bottoming hand tap ground from high-speed steel (HSS) and manufactured in the USA. Bottoming taps are designed to cut threads to the bottom of a blind hole, making them essential when full thread depth is required close to the base of the bore. At 0.32 pounds, this is a compact, hand-use tap suited for threading steel, aluminum, cast iron, and similar materials. It carries a 3\/8 inch diameter with a 16 threads-per-inch (TPI) pitch, conforming to the unified national coarse (UNC) thread standard.\u003c\/p\u003e\u003cp\u003eThis tap is used in maintenance, repair, and fabrication applications across plumbing, HVAC, electrical, and general mechanical trades. It is appropriate wherever a 3\/8-16 UNC bottoming thread is needed in a blind hole, including tapping threaded bosses on equipment frames, brackets, pipe flanges, and mechanical assemblies. Machinists, pipefitters, millwrights, and maintenance technicians commonly keep this size on hand for field and shop work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBottoming tap geometry cuts threads to the base of blind holes where a plug or taper tap cannot reach\u003c\/li\u003e\n\u003cli\u003eHSS construction provides hardness and wear resistance for threading ferrous and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003e3\/8-16 UNC thread form is one of the most common fastener sizes in trade and industrial applications\u003c\/li\u003e\n\u003cli\u003eUSA manufactured to consistent dimensional tolerances\u003c\/li\u003e\n\u003cli\u003eLightweight at 0.32 pounds for easy single-hand use with a tap wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 3\/8-16 UNC bottoming hand tap compatible with conventional tap wrenches and tap handles sized for this shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tap is intended for hand use with a tap wrench — do not use in a power driver without confirming it is rated for machine use. Secure the workpiece firmly before tapping and apply cutting fluid appropriate for the base material to extend tap life and improve thread quality. Back the tap off periodically to break chips and clear the flutes, especially in deeper blind holes. Always wear eye protection when tapping.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8-16 UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Type\u003c\/strong\u003e: Bottom (Bottoming)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HT-3750-16-B-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233203192114,"sku":"HT-3750-16-B-D","price":16.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307622861.png?v=1780094033"},{"product_id":"eagle-cutting-tool-cb-sj-6-d-carbide-burr-60-degree","title":"Eagle Cutting Tool CB-SJ-6-D Carbide Burr 60 Degree","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EAGLE CUTTING TOOL CB-SJ-6-D is a carbide rotary burr designed for material removal, deburring, and shaping in metalworking and fabrication applications. This SJ-6 style burr features a 60-degree included angle and is offered in both single cut and double cut configurations, making it adaptable to a range of stock removal rates and surface finish requirements. At 5\/8 inch cutting diameter, it fits standard die grinders and rotary tools used daily in machining, welding prep, and tool-and-die work. The carbide construction delivers hardness and heat resistance that outlasts high-speed steel alternatives in demanding cutting environments.\u003c\/p\u003e\n\u003cp\u003eThis burr is suited for use on ferrous and non-ferrous metals, cast iron, hardened steel, and similar hard materials encountered in fabrication shops, maintenance facilities, and industrial settings. The SJ-6 inverted cone profile with a 60-degree included angle is commonly applied to countersinking, chamfering, spot-facing, and cleaning weld joints in tight or angled access areas. Machinists, tool-and-die makers, welders, and maintenance technicians are the primary users of this style of rotary burr.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSJ-6 inverted cone profile with 60-degree included angle for chamfering and countersinking work\u003c\/li\u003e\n  \u003cli\u003e5\/8 inch cutting diameter fits standard die grinder collets\u003c\/li\u003e\n  \u003cli\u003eCarbide construction provides hardness and extended tool life on hard metals\u003c\/li\u003e\n  \u003cli\u003eAvailable in single cut and double cut for varied stock removal and finish control\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.13 pounds for reduced operator fatigue during extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard die grinders and rotary tools accepting the appropriate shank diameter. Suitable for cutting, shaping, and finishing ferrous metals, non-ferrous metals, and hard materials in general fabrication and machining applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of rotary burrs is performed by machinists, fabricators, and maintenance technicians using die grinders or rotary tools. Ensure the grinder is fully powered off and the collet is secure before inserting or removing the burr. Always match the burr shank to the collet size of the tool and confirm the RPM rating of the burr meets or exceeds the grinder speed setting. Wear appropriate eye protection and secure the workpiece before operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: SJ-6 Inverted Cone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Type\u003c\/strong\u003e: Single Cut and Double Cut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EAGLE CUTTING TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CB-SJ-6-D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EAGLE CUTTING TOOL","offers":[{"title":"Default Title","offer_id":51233203454258,"sku":"CB-SJ-6-D","price":25.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/307621919.png?v=1780094042"}],"url":"https:\/\/voomisupply.com\/collections\/eagle-cutting-tool.oembed?page=2","provider":"Voomi Supply","version":"1.0","type":"link"}