{"title":"AQUECOIL","description":null,"products":[{"product_id":"aquecoil-hhu-mi-3-hydronic-heating-unit","title":"Aquecoil hhu-mi-3 Hydronic Heating Unit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe AQUECOIL hhu-mi-3 is a hydronic heating unit designed to work alongside a compatible air handler and a hot water source to deliver residential space heating. It extracts heat energy from hot water and uses the air handler to distribute warm air throughout the conditioned space. The cabinet is constructed from rust-proof aluminum with a baked enamel finish and is fully insulated with high-R rigid foam. Design Certified and Listed to meet UL and CSA Standards, and tested to comply with ANSI\/NSF 61-2012, the hhu-mi-3 is installed by HVAC technicians as a direct alternative to a furnace or heat pump for space heating applications.\u003c\/p\u003e\u003cp\u003eThe hhu-mi-3 is intended for residential space heating in installations where a hot water source such as a gas-fired water heater or boiler is already present or planned. It mounts directly onto the air handler's discharge or return side and supports both horizontal and vertical configurations. This makes it well suited for retrofit and new-construction applications where conventional furnace or heat pump heating is not preferred or practical. The unit is sized specifically for Mitsubishi large air handlers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounts directly onto the air handler discharge or return in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eHeavy-duty rust-proof aluminum cabinet with baked enamel finish\u003c\/li\u003e\n\u003cli\u003eFully insulated with high-R rigid foam for thermal efficiency\u003c\/li\u003e\n\u003cli\u003eCompatible with any hot water source providing sufficient BTUH output\u003c\/li\u003e\n\u003cli\u003eOptional 230-volt or 115-volt circulation pump for integration with air handler wiring and controls\u003c\/li\u003e\n\u003cli\u003eOptional water-lubricated, low-wattage circulation pump requires no maintenance\u003c\/li\u003e\n\u003cli\u003eOptional no-lead valve kit includes full-port ball valves, bleed ports, and swing check valves\u003c\/li\u003e\n\u003cli\u003eDesign Certified and Listed to UL and CSA Standards; tested to ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with Mitsubishi large air handlers. Accepts any hot water source with sufficient BTUH capacity, including gas-fired water heaters and boilers. Supports optional return-side air handler configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with hydronic heating systems and air handler integration. Shut off the hot water supply and disconnect power to the air handler before beginning installation or service. Plumbing connections must comply with applicable local codes and ANSI\/NSF 61-2012 requirements for potable or heating water systems. Do not operate the unit without verifying that the circulation pump and hot water source are properly commissioned and that all bleed ports have been purged of air.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-proof aluminum with baked enamel finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R rigid foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCirculation Pump Options\u003c\/strong\u003e: 230-volt or 115-volt; water-lubricated low-wattage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed, CSA Certified, ANSI\/NSF 61-2012 compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 3-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-mi-3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51467344675122,"sku":"HHU-MI-3","price":957.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946169.jpg?v=1784851298"},{"product_id":"aquecoil-hhu-cc-2-hydronic-heating-unit-2-5-3-ton","title":"Aquecoil hhu-cc-2 Hydronic Heating Unit 2.5-3 Ton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe AQUECOIL hhu-cc-2 is a hydronic heating unit designed to work alongside a standard air handler and a hot water source to deliver residential space heating without a furnace or heat pump. The unit extracts BTUs from the hot water supply and uses the connected air handler to distribute heated air through the conditioned space. It mounts directly over the air handler discharge or return opening in either horizontal or vertical configurations. The heavy-duty cabinet is constructed from rust-proof aluminum with a baked enamel finish and is fully insulated with high-R rigid foam to minimize heat loss. Licensed HVAC technicians typically handle installation in residential hydronic heating systems.\u003c\/p\u003e\u003cp\u003eThe hhu-cc-2 is sized for 2.5-3 ton air handler applications and suits residential installations where a hot water source such as a gas-fired water heater or boiler is already present or planned. The unit is equally suited to horizontal and vertical air handler configurations, making it adaptable to a wide range of equipment layouts. An optional circulation pump is available in 115-volt or 230-volt configurations for straightforward integration with existing air handler wiring and controls. An optional no-lead valve kit with full-port ball valves, bleed ports, and swing check valves is also available for a complete hydronic connection package.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMounts directly to air handler discharge or return in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eRust-proof aluminum cabinet with baked enamel finish for durability\u003c\/li\u003e\n\u003cli\u003eFully insulated with high-R rigid foam to reduce standby heat loss\u003c\/li\u003e\n\u003cli\u003eCompatible with any hot water source that provides sufficient BTUH output\u003c\/li\u003e\n\u003cli\u003eHeat output adjustable to meet specific space heating requirements\u003c\/li\u003e\n\u003cli\u003eOptional 115-volt or 230-volt circulation pump for easy integration with air handler controls\u003c\/li\u003e\n\u003cli\u003eDesign Certified and Listed to UL and CSA Standards; tested to comply with ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to fit directly onto 2.5-3 ton air handlers in residential hydronic heating applications; compatible with any hot water source providing sufficient BTUH, including gas-fired water heaters and boilers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with hydronic heating systems and local mechanical codes. Shut off the hot water source and disconnect power to the air handler before beginning installation or service. Ensure proper bleed of air from the hydronic loop before commissioning; an optional bleed-port valve kit is available for this purpose. Follow all applicable local mechanical and plumbing codes during connection of water supply and return lines.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity Range\u003c\/strong\u003e: 2.5-3 Ton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-proof aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Baked enamel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R rigid foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Pump Voltage\u003c\/strong\u003e: 115 volts or 230 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed, CSA Certified, ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 3-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-cc-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51467528929586,"sku":"HHU-CC-2","price":871.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946515.jpg?v=1784854398"},{"product_id":"aquecoil-hhu-am-2-hydronic-heating-unit-2-3-ton","title":"Aquecoil hhu-am-2 Hydronic Heating Unit 2-3 Ton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe AQUECOIL hhu-am-2 is a hydronic heating unit designed to work alongside a residential air handler and a hot water source to deliver space heating without a furnace or heat pump. The unit mounts directly over the air handler discharge or return opening and extracts BTUs from the hot water supply, then uses the air handler blower to distribute heated air through the conditioned space. It is built with a heavy-duty rust-proof aluminum cabinet, a baked enamel finish, and full rigid foam insulation for durable, efficient field installation. Licensed HVAC technicians install this unit in both horizontal and vertical configurations.\u003c\/p\u003e\n\u003cp\u003eThe hhu-am-2 is sized for 2-3 ton air handlers and suits residential space heating applications where a gas-fired water heater, boiler, or other hot water source is already present or planned. It is a practical alternative to conventional heating equipment in systems where hydronic heat is preferred or where adding a furnace or heat pump is not feasible. Heat output is adjustable to match the load requirements of the conditioned space. Optional circulation pump accessories in 230-volt or 115-volt configurations allow direct connection to existing air handler wiring and controls.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts directly onto the air handler discharge or return in horizontal or vertical orientation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty rust-proof aluminum cabinet with baked enamel finish\u003c\/li\u003e\n  \u003cli\u003eFully insulated with high-R rigid foam for reduced heat loss\u003c\/li\u003e\n  \u003cli\u003eCompatible with any hot water source providing sufficient BTUH output\u003c\/li\u003e\n  \u003cli\u003eOptional 230-volt or 115-volt circulation pump for integration with air handler controls\u003c\/li\u003e\n  \u003cli\u003eOptional water-lubricated, low-wattage circulation pump requires no maintenance\u003c\/li\u003e\n  \u003cli\u003eDesign certified and listed to UL and CSA standards; tested to ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to fit directly onto Bosch 2-3 ton air handlers in residential heating applications; compatible with any hot water source with sufficient BTUH capacity, including gas-fired water heaters and boilers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of the hhu-am-2 should be performed by a licensed HVAC technician familiar with hydronic and forced-air systems. Shut off the hot water supply and disconnect power to the air handler before beginning installation. Verify that the water source provides adequate BTUH output to meet the heating load before commissioning. Follow all applicable local mechanical codes and the manufacturer installation instructions for pump wiring and valve connections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-proof aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Baked enamel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R rigid foam\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Residential hydronic space heating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Orientation\u003c\/strong\u003e: Horizontal or vertical, discharge or return side\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL, CSA, ANSI\/NSF 61-2012\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 3-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-am-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51467548459314,"sku":"HHU-AM-2","price":871.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946149.jpg?v=1784854580"},{"product_id":"aquecoil-hhu-am-3-hydronic-heating-unit-4-5-ton","title":"Aquecoil hhu-am-3 Hydronic Heating Unit 4-5 Ton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe AQUECOIL hhu-am-3 is a hydronic heating unit designed to pair with a compatible air handler and a hot water source to deliver residential space heating. It extracts heat energy from hot water and uses the air handler's blower to distribute warm air through the conditioned space. The unit mounts directly over the air handler's discharge or return opening and supports both horizontal and vertical installations. Its heavy-duty aluminum cabinet features a baked enamel finish and full rigid foam insulation for durable, efficient operation. Licensed HVAC technicians typically install this unit as a furnace or heat pump alternative in hydronic heating applications.\u003c\/p\u003e\n\u003cp\u003eThe hhu-am-3 is suited for residential space heating systems where a hot water source such as a gas-fired water heater or boiler is already present or planned. It is sized for use with 4 to 5 ton air handlers. The unit accommodates discharge-side or return-side air handler configurations, giving installers flexibility in system layout. Heat output is adjustable to match the load requirements of the conditioned space. Optional circulation pump packages are available in 230-volt or 115-volt configurations to simplify integration with existing air handler wiring and controls.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts directly onto the air handler discharge or return in horizontal or vertical orientation\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty rust-proof aluminum cabinet with baked enamel finish\u003c\/li\u003e\n  \u003cli\u003eFully insulated with high-R rigid foam to minimize heat loss\u003c\/li\u003e\n  \u003cli\u003eCompatible with any hot water source providing sufficient BTUH output\u003c\/li\u003e\n  \u003cli\u003eOptional 230-volt or 115-volt circulation pump for direct integration with air handler controls\u003c\/li\u003e\n  \u003cli\u003eOptional water-lubricated, low-wattage circulation pump requires no routine maintenance\u003c\/li\u003e\n  \u003cli\u003eDesign Certified and Listed to UL and CSA Standards; tested to comply with ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 4 to 5 ton air handlers in residential hydronic heating applications. Compatible with any hot water source that provides sufficient BTUH output, including gas-fired water heaters and boilers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with hydronic heating systems and local mechanical codes. Shut off the hot water source and de-energize the air handler before mounting or making water connections. Ensure all water connections are properly sealed and that the system is bled of air before startup. Optional ball valve and swing check valve kits should be installed per the manufacturer instructions to protect the coil and maintain flow control.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Residential hydronic space heating\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Air Handler Size\u003c\/strong\u003e: 4-5 Ton\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-proof aluminum with baked enamel finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R rigid foam\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting Orientation\u003c\/strong\u003e: Horizontal or vertical, discharge-side or return-side\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional Pump Voltage\u003c\/strong\u003e: 230-volt or 115-volt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed, CSA Certified, ANSI\/NSF 61-2012 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-am-3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51467555045682,"sku":"HHU-AM-3","price":957.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946506.jpg?v=1784854750"},{"product_id":"aquecoil-hhu-cc-1-hydronic-heating-coil-1-5-2-5-ton","title":"Aquecoil hhu-cc-1 Hydronic Heating Coil 1.5-2.5 Ton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe AQUECOIL hhu-cc-1 is a hydronic heating coil unit designed to work alongside a compatible air handler and a hot water source to deliver residential space heating without a furnace or heat pump. The unit extracts BTUs from the hot water supply and uses the air handler to distribute conditioned air throughout the space. It mounts directly over the air handler discharge or return in horizontal or vertical configurations. The cabinet is constructed from rust-proof aluminum with a baked enamel finish and is fully insulated with high-R rigid foam. Licensed HVAC technicians typically handle installation. The unit is Design Certified and Listed to UL and CSA Standards and tested to comply with ANSI\/NSF 61-2012.\u003c\/p\u003e\n\u003cp\u003eThe hhu-cc-1 is sized for 1.5 to 2.5 ton air handlers in residential applications. It suits scenarios where a hot water source such as a gas-fired water heater or boiler is already present and the installer wants to add forced-air heating capacity without installing a separate furnace. Heat output is adjustable to meet the load requirements of the space. Optional circulation pump configurations are available in 230-volt or 115-volt to allow integration with existing air handler wiring and controls. An optional water-lubricated, low-wattage circulation pump requires no routine maintenance. An optional No Lead valve kit with full-port ball valves, bleed ports, and swing check valves is also available for the system.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts directly to air handler discharge or return in horizontal or vertical orientation\u003c\/li\u003e\n  \u003cli\u003eRust-proof aluminum cabinet with baked enamel finish\u003c\/li\u003e\n  \u003cli\u003eFully insulated with high-R rigid foam to minimize heat loss\u003c\/li\u003e\n  \u003cli\u003eCompatible with any hot water source that provides sufficient BTU\/h output\u003c\/li\u003e\n  \u003cli\u003eOptional 230-volt or 115-volt circulation pump for integration with air handler controls\u003c\/li\u003e\n  \u003cli\u003eDesign Certified and Listed to UL and CSA Standards; tested to ANSI\/NSF 61-2012\u003c\/li\u003e\n  \u003cli\u003e3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to fit 1.5 to 2.5 ton air handlers in residential hydronic heating applications. Compatible with any hot water source providing sufficient BTU\/h, including gas-fired water heaters and boilers. Suitable for discharge-side or return-side air handler configurations.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with hydronic heating systems and forced-air equipment. Shut off the hot water supply and disconnect power to the air handler before mounting or making any piping and wiring connections. Verify that the hot water source provides adequate BTU\/h for the intended heating load before commissioning the system. Follow all applicable local mechanical codes and the manufacturer installation instructions when connecting piping, controls, and optional circulation pump components.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTonnage Range\u003c\/strong\u003e: 1.5 to 2.5 tons\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-proof aluminum with baked enamel finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R rigid foam\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional Pump Voltage\u003c\/strong\u003e: 230-volt or 115-volt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed, CSA Listed, ANSI\/NSF 61-2012\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 3-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-cc-1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51467580473650,"sku":"HHU-CC-1","price":804.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946166.jpg?v=1784854801"},{"product_id":"aquecoil-hhu-cc-3-hydronic-heating-unit-4-5-ton","title":"Aquecoil hhu-cc-3 Hydronic Heating Unit 4-5 Ton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe AQUECOIL hhu-cc-3 is a hydronic heating coil unit designed to work alongside a separately sourced air handler and a hot water supply to deliver residential space heating. The unit extracts BTUs from the hot water source and uses the air handler to distribute heated air through the conditioned space. The cabinet is constructed from rust-proof aluminum with a baked enamel finish and is fully insulated with high-R rigid foam. Licensed HVAC technicians install this unit in residential applications where a furnace or heat pump is not preferred or practical, using it as a low-fuel-cost alternative that draws heat from a gas-fired water heater, boiler, or any sufficient hot water source.\u003c\/p\u003e\u003cp\u003eThe hhu-cc-3 is sized for 4-5 ton air handlers and mounts directly over the air handler's discharge or return opening in either horizontal or vertical orientations. This flexibility makes it suitable for a range of residential installation configurations. An optional 230-volt or 115-volt circulation pump connects easily to existing air handler wiring and controls. A water-lubricated, low-wattage circulation pump option requires no maintenance. An optional no-lead valve kit with full-port ball valves, bleed ports, and swing check valves is also available for a complete hydronic connection package.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRust-proof aluminum cabinet with baked enamel finish for durability\u003c\/li\u003e\n\u003cli\u003eFully insulated with high-R rigid foam to minimize heat loss\u003c\/li\u003e\n\u003cli\u003eCompatible with any hot water source that provides sufficient BTUH output\u003c\/li\u003e\n\u003cli\u003eFits over air handler discharge or return in horizontal or vertical installations\u003c\/li\u003e\n\u003cli\u003eOptional 230-volt or 115-volt circulation pump for simplified wiring integration\u003c\/li\u003e\n\u003cli\u003eDesign Certified and Listed to UL and CSA Standards; tested to ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003cli\u003e3-Year Limited Warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to fit directly onto 4-5 ton air handlers in residential hydronic heating applications where a sufficient hot water source is available.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with hydronic heating systems and local mechanical codes. Shut off the hot water supply and disconnect power to the air handler before beginning installation. Ensure all hydronic connections are pressure-tested and bled of air before commissioning. Circulation pump wiring should comply with applicable NEC requirements for the voltage selected.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizing\u003c\/strong\u003e: 4-5 Ton Air Handler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-Proof Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Baked Enamel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R Rigid Foam\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Pump Voltage\u003c\/strong\u003e: 230 volts or 115 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed, CSA Certified, ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 3-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-cc-3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51468061278514,"sku":"HHU-CC-3","price":957.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946516.jpg?v=1784859153"},{"product_id":"aquecoil-hhu-mi-1-hydronic-heating-unit-mitsubishi","title":"Aquecoil hhu-mi-1 Hydronic Heating Unit Mitsubishi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe AQUECOIL hhu-mi-1 is a hydronic heating coil unit designed to work alongside a compatible air handler and a hot water source to deliver residential space heating. The unit mounts directly over the air handler discharge or return opening and extracts BTUs from the hot water supply, then uses the air handler to distribute warmed air through the conditioned space. It is compatible with both horizontal and vertical air handler configurations. The heavy-duty cabinet is constructed from rust-proof aluminum with a baked enamel finish and is fully insulated with high-R rigid foam. Licensed HVAC technicians typically install and commission this unit.\u003c\/p\u003e\n\u003cp\u003eThe hhu-mi-1 is sized to fit Mitsubishi small air handlers and is suited for residential space heating applications where a furnace or heat pump is not the preferred or feasible heat source. It connects to any hot water source with sufficient BTUH output, including gas-fired water heaters and boilers. The unit offers an optional 230-volt or 115-volt circulation pump for straightforward integration with existing air handler wiring and controls. An optional water-lubricated, low-wattage circulation pump is also available and requires no routine maintenance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMounts directly onto compatible air handler discharge or return in horizontal or vertical orientation\u003c\/li\u003e\n  \u003cli\u003eRust-proof aluminum cabinet with baked enamel finish for durability in mechanical room environments\u003c\/li\u003e\n  \u003cli\u003eFully insulated with high-R rigid foam to minimize heat loss\u003c\/li\u003e\n  \u003cli\u003eCompatible with any hot water source providing sufficient BTUH output, including gas-fired boilers and water heaters\u003c\/li\u003e\n  \u003cli\u003eOptional 115-volt or 230-volt circulation pump integrates with air handler wiring and controls\u003c\/li\u003e\n  \u003cli\u003eDesign Certified and Listed to meet UL and CSA Standards; tested to comply with ANSI\/NSF 61-2012\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to fit directly onto Mitsubishi small air handlers in residential hydronic heating applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician familiar with hydronic heating systems and air handler integration. Shut off the hot water source and de-energize the air handler at the disconnect before beginning any connections. Verify that the hot water supply provides adequate BTUH output for the intended space heating load before commissioning. Follow all applicable local mechanical codes and manufacturer instructions when connecting water supply lines and electrical components.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Rust-proof aluminum with baked enamel finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation\u003c\/strong\u003e: High-R rigid foam\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional Pump Voltage\u003c\/strong\u003e: 115 volts or 230 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: UL Listed, CSA Certified, ANSI\/NSF 61-2012 Compliant\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 3-Year Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AQUECOIL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: hhu-mi-1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AQUECOIL","offers":[{"title":"Default Title","offer_id":51468617417010,"sku":"HHU-MI-1","price":804.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946168.jpg?v=1784862686"}],"url":"https:\/\/voomisupply.com\/collections\/aquecoil.oembed","provider":"Voomi Supply","version":"1.0","type":"link"}